@@ -64,6 +64,11 @@ static int imsic_irq_retrigger(struct irq_data *d)
return 0;
}
+static void imsic_irq_ack(struct irq_data *d)
+{
+ irq_move_irq(d);
+}
+
static void imsic_irq_compose_vector_msg(struct imsic_vector *vec, struct msi_msg *msg)
{
phys_addr_t msi_addr;
@@ -97,6 +102,21 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
bool force)
{
struct imsic_vector *old_vec, *new_vec;
+ struct imsic_vector tmp_vec;
+
+ /*
+ * Requirements for the downstream irqdomains (or devices):
+ *
+ * 1) Downstream irqdomains (or devices) with atomic MSI update can
+ * happily do imsic_irq_set_affinity() in the process-context on
+ * any CPU so the irqchip of such irqdomains must not set the
+ * IRQCHIP_MOVE_DEFERRED flag.
+ *
+ * 2) Downstream irqdomains (or devices) with non-atomic MSI update
+ * must do imsic_irq_set_affinity() in the interrupt-context upon
+ * next interrupt so the irqchip of such irqdomains must set the
+ * IRQCHIP_MOVE_DEFERRED flag.
+ */
old_vec = irq_data_get_irq_chip_data(d);
if (WARN_ON(!old_vec))
@@ -115,6 +135,33 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
if (!new_vec)
return -ENOSPC;
+ /*
+ * Device having non-atomic MSI update might see an intermediate
+ * state when changing target IMSIC vector from one CPU to another.
+ *
+ * To avoid losing interrupt to such intermediate state, do the
+ * following (just like x86 APIC):
+ *
+ * 1) First write a temporary IMSIC vector to the device which
+ * has MSI address same as the old IMSIC vector but MSI data
+ * matches the new IMSIC vector.
+ *
+ * 2) Next write the new IMSIC vector to the device.
+ *
+ * Based on the above, the __imsic_local_sync() must check pending
+ * status of both old MSI data and new MSI data on the old CPU.
+ */
+
+ if (!irq_can_move_in_process_context(d) &&
+ new_vec->local_id != old_vec->local_id) {
+ /* Setup temporary vector */
+ tmp_vec.cpu = old_vec->cpu;
+ tmp_vec.local_id = new_vec->local_id;
+
+ /* Point device to the temporary vector */
+ imsic_msi_update_msg(irq_get_irq_data(d->irq), &tmp_vec);
+ }
+
/* Point device to the new vector */
imsic_msi_update_msg(irq_get_irq_data(d->irq), new_vec);
@@ -171,6 +218,7 @@ static struct irq_chip imsic_irq_base_chip = {
.irq_force_complete_move = imsic_irq_force_complete_move,
#endif
.irq_retrigger = imsic_irq_retrigger,
+ .irq_ack = imsic_irq_ack,
.irq_compose_msi_msg = imsic_irq_compose_msg,
.flags = IRQCHIP_SKIP_SET_WAKE |
IRQCHIP_MASK_ON_SUSPEND,
@@ -190,7 +238,7 @@ static int imsic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
return -ENOSPC;
irq_domain_set_info(domain, virq, virq, &imsic_irq_base_chip, vec,
- handle_simple_irq, NULL, NULL);
+ handle_edge_irq, NULL, NULL);
irq_set_noprobe(virq);
irq_set_affinity(virq, cpu_online_mask);
irq_data_update_effective_affinity(irq_get_irq_data(virq), cpumask_of(vec->cpu));
@@ -229,15 +277,36 @@ static const struct irq_domain_ops imsic_base_domain_ops = {
#endif
};
+static bool imsic_init_dev_msi_info(struct device *dev,
+ struct irq_domain *domain,
+ struct irq_domain *real_parent,
+ struct msi_domain_info *info)
+{
+ if (!msi_lib_init_dev_msi_info(dev, domain, real_parent, info))
+ return false;
+
+ switch (info->bus_token) {
+ case DOMAIN_BUS_PCI_DEVICE_MSI:
+ case DOMAIN_BUS_PCI_DEVICE_MSIX:
+ info->chip->flags |= IRQCHIP_MOVE_DEFERRED;
+ break;
+ default:
+ break;
+ }
+
+ return true;
+}
+
static const struct msi_parent_ops imsic_msi_parent_ops = {
.supported_flags = MSI_GENERIC_FLAGS_MASK |
MSI_FLAG_PCI_MSIX,
.required_flags = MSI_FLAG_USE_DEF_DOM_OPS |
MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_PCI_MSI_MASK_PARENT,
+ .chip_flags = MSI_CHIP_FLAG_SET_ACK,
.bus_select_token = DOMAIN_BUS_NEXUS,
.bus_select_mask = MATCH_PCI_MSI | MATCH_PLATFORM_MSI,
- .init_dev_msi_info = msi_lib_init_dev_msi_info,
+ .init_dev_msi_info = imsic_init_dev_msi_info,
};
int imsic_irqdomain_init(void)
@@ -126,8 +126,8 @@ void __imsic_eix_update(unsigned long base_id, unsigned long num_id, bool pend,
static bool __imsic_local_sync(struct imsic_local_priv *lpriv)
{
- struct imsic_local_config *mlocal;
- struct imsic_vector *vec, *mvec;
+ struct imsic_local_config *tlocal, *mlocal;
+ struct imsic_vector *vec, *tvec, *mvec;
bool ret = true;
int i;
@@ -169,13 +169,36 @@ static bool __imsic_local_sync(struct imsic_local_priv *lpriv)
*/
mvec = READ_ONCE(vec->move_next);
if (mvec) {
- if (__imsic_id_read_clear_pending(i)) {
+ /*
+ * Device having non-atomic MSI update might see an
+ * intermediate state so check both old ID and new ID
+ * for pending interrupts.
+ *
+ * For details, refer imsic_irq_set_affinity().
+ */
+
+ tvec = vec->local_id == mvec->local_id ?
+ NULL : &lpriv->vectors[mvec->local_id];
+ if (tvec &&
+ !irq_can_move_in_process_context(irq_get_irq_data(vec->irq)) &&
+ __imsic_id_read_clear_pending(tvec->local_id)) {
+ /* Retrigger temporary vector if it was already in-use */
+ if (READ_ONCE(tvec->enable)) {
+ tlocal = per_cpu_ptr(imsic->global.local, tvec->cpu);
+ writel_relaxed(tvec->local_id, tlocal->msi_va);
+ }
+
+ mlocal = per_cpu_ptr(imsic->global.local, mvec->cpu);
+ writel_relaxed(mvec->local_id, mlocal->msi_va);
+ }
+
+ if (__imsic_id_read_clear_pending(vec->local_id)) {
mlocal = per_cpu_ptr(imsic->global.local, mvec->cpu);
writel_relaxed(mvec->local_id, mlocal->msi_va);
}
WRITE_ONCE(vec->move_next, NULL);
- imsic_vector_free(&lpriv->vectors[i]);
+ imsic_vector_free(vec);
}
skip:
Device having non-atomic MSI update might see an intermediate state when changing target IMSIC vector from one CPU to another. To avoid losing interrupt to such intermediate state, do the following (just like x86 APIC): 1) First write a temporary IMSIC vector to the device which has MSI address same as the old IMSIC vector but with MSI data matches the new IMSIC vector. 2) Next write the new IMSIC vector to the device. Based on the above, the __imsic_local_sync() must check pending status of both old MSI data and new MSI data on the old CPU. In addition, the movement of IMSIC vector for non-atomic device MSI update must be done in interrupt context using IRQCHIP_MOVE_DEFERRED. Signed-off-by: Anup Patel <apatel@ventanamicro.com> --- drivers/irqchip/irq-riscv-imsic-platform.c | 73 +++++++++++++++++++++- drivers/irqchip/irq-riscv-imsic-state.c | 31 +++++++-- 2 files changed, 98 insertions(+), 6 deletions(-)