@@ -11,7 +11,9 @@ maintainers:
properties:
compatible:
- const: brcm,bcm59056
+ enum:
+ - brcm,bcm59054
+ - brcm,bcm59056
reg:
maxItems: 1
@@ -21,7 +23,6 @@ properties:
regulators:
type: object
- $ref: /schemas/regulator/brcm,bcm59056.yaml#
required:
- compatible
@@ -30,6 +31,27 @@ required:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm59054
+ then:
+ properties:
+ regulators:
+ $ref: /schemas/regulator/brcm,bcm59054.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm59056
+ then:
+ properties:
+ regulators:
+ $ref: /schemas/regulator/brcm,bcm59056.yaml#
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
new file mode 100644
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/brcm,bcm59054.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM59054 Power Management Unit regulators
+
+description: |
+ This is a part of device tree bindings for the BCM59054 power
+ management unit.
+
+ See Documentation/devicetree/bindings/mfd/brcm,bcm590xx.yaml for
+ additional information and example.
+
+maintainers:
+ - Artur Weber <aweber.kernel@gmail.com>
+
+patternProperties:
+ "^(cam|sim|mmc)ldo[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ "^(rf|sd|sdx|aud|mic|usb|vib|tcx)ldo$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ "^(c|mm|v)sr$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ "^(io|sd)sr[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ "^gpldo[1-3]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ "^lvldo[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+properties:
+ vbus:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+additionalProperties: false
The BCM59054 MFD is fairly similar to the BCM59056, and will use the same driver. Add compatible and specify the allowed regulator nodes. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> --- Changes in v5: - Replace mfd/brcm,bcm59056.yaml with mfd/brcm,bcm590xx.yaml in regulator bindings description Changes in v4: - Fix yamllint errors (missing unevaluatedProperties) - Drop comment with regulator name list - Use full schema paths for $reg - Change description of regulator binding to mention BCM59054 explicitly - Drop quotes around vbus reg name - Change "Power Management IC" to "Power Management Unit" to match official Broadcom naming Note that I did not end up moving the regulator refs from allOf compatible matches; I explained my reasoning in [1]. [1] https://lore.kernel.org/lkml/ab853605-859d-44c6-8cbd-44391cd677e6@gmail.com/ Changes in v3: - Split regulator node into separate file - Removed quotes around compatible --- .../devicetree/bindings/mfd/brcm,bcm590xx.yaml | 26 +++++++++- .../bindings/regulator/brcm,bcm59054.yaml | 56 ++++++++++++++++++++++ 2 files changed, 80 insertions(+), 2 deletions(-)