| Message ID | 20250305132018.2260771-1-s-vadapalli@ti.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: j721e: Fix the value of linkdown_irq_regfield for J784S4 | expand |
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 0341d51d6aed..1da9d9918d0d 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -376,13 +376,13 @@ static const struct j721e_pcie_data j784s4_pcie_rc_data = { .mode = PCI_MODE_RC, .quirk_retrain_flag = true, .byte_access_allowed = false, - .linkdown_irq_regfield = LINK_DOWN, + .linkdown_irq_regfield = J7200_LINK_DOWN, .max_lanes = 4, }; static const struct j721e_pcie_data j784s4_pcie_ep_data = { .mode = PCI_MODE_EP, - .linkdown_irq_regfield = LINK_DOWN, + .linkdown_irq_regfield = J7200_LINK_DOWN, .max_lanes = 4, };
Commit under Fixes assigned the value of 'linkdown_irq_regfield' for the J784S4 SoC as 'LINK_DOWN' which corresponds to BIT(1). However, according to the Technical Reference Manual and Register Documentation for the J784S4 SoC [0], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1" which is __NOT__ the field for the link-state interrupt. Instead, it is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE". Hence, set 'linkdown_irq_regfield' to the macro 'J7200_LINK_DOWN' which expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs already reuse this macro since it accurately represents the link-state field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register. [0]: https://www.ti.com/lit/zip/spruj52 Fixes: e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration") Cc: stable@vger.kernel.org Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- Hello, This patch is based on commit 48a5eed9ad58 Merge tag 'devicetree-fixes-for-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux of the master branch of Linux. Patch has been tested on J784S4-EVM, validating that disconnecting an Endpoint Device connected to J784S4-EVM results in the following message on the J784S4-EVM: j721e-pcie 2900000.pcie: LINK DOWN! which wasn't seen earlier. Regards, Siddharth. drivers/pci/controller/cadence/pci-j721e.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)