diff mbox series

[v5,07/13] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag

Message ID 20250306-topic-am62-partialio-v6-12-b4-v5-7-f9323d3744a2@baylibre.com (mailing list archive)
State New
Headers show
Series firmware: ti_sci: Partial-IO support | expand

Commit Message

Markus Schneider-Pargmann March 6, 2025, 11:14 a.m. UTC 
WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
in that case.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index cac7cccc111212eba520454396c8cc5c9fcba9b1..79a9f54fa0095c4e3864872bc06ef3d033215b2b 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -18,6 +18,7 @@ 
 #define DS_OUT_VAL_SHIFT	(26)
 #define DS_PULLUD_EN_SHIFT	(27)
 #define DS_PULLTYPE_SEL_SHIFT	(28)
+#define WKUP_EN_SHIFT		(29)
 
 #define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
 #define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
@@ -56,6 +57,7 @@ 
 #define PIN_DS_PULLUD_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
 #define PIN_DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT)
 #define PIN_DS_PULL_UP			(1 << DS_PULLTYPE_SEL_SHIFT)
+#define WKUP_EN				(1 << WKUP_EN_SHIFT)
 
 /* Default mux configuration for gpio-ranges to use with pinctrl */
 #define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)