diff mbox series

[2/4] ethernet: stmmac: dwmac-rk: Add GMAC support for RK3528

Message ID 20250306221402.1704196-3-jonas@kwiboo.se (mailing list archive)
State New
Headers show
Series rockchip: Enable Ethernet controller on Radxa E20C | expand

Commit Message

Jonas Karlman March 6, 2025, 10:13 p.m. UTC 
From: David Wu <david.wu@rock-chips.com>

Rockchip RK3528 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.

Add initial support for the RK3528 variants.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
This does not include power on/off support for the integrated PHY.
---
 .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 132 ++++++++++++++++++
 1 file changed, 132 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index ba1cd079adf2..0ae3ffacb794 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -830,6 +830,137 @@  static const struct rk_gmac_ops rk3399_ops = {
 	.set_rmii_speed = rk3399_set_rmii_speed,
 };
 
+#define RK3528_VO_GRF_GMAC_CON		0x0018
+#define RK3528_VO_GRF_MACPHY_CON0	0x001c
+#define RK3528_VO_GRF_MACPHY_CON1	0x0020
+#define RK3528_VPU_GRF_GMAC_CON5	0x0018
+#define RK3528_VPU_GRF_GMAC_CON6	0x001c
+
+#define RK3528_GMAC_RXCLK_DLY_ENABLE	GRF_BIT(15)
+#define RK3528_GMAC_RXCLK_DLY_DISABLE	GRF_CLR_BIT(15)
+#define RK3528_GMAC_TXCLK_DLY_ENABLE	GRF_BIT(14)
+#define RK3528_GMAC_TXCLK_DLY_DISABLE	GRF_CLR_BIT(14)
+
+#define RK3528_GMAC_CLK_RX_DL_CFG(val)	HIWORD_UPDATE(val, 0xFF, 8)
+#define RK3528_GMAC_CLK_TX_DL_CFG(val)	HIWORD_UPDATE(val, 0xFF, 0)
+
+#define RK3528_GMAC0_PHY_INTF_SEL_RMII	GRF_BIT(1)
+#define RK3528_GMAC1_PHY_INTF_SEL_RGMII	GRF_CLR_BIT(8)
+#define RK3528_GMAC1_PHY_INTF_SEL_RMII	GRF_BIT(8)
+
+#define RK3528_GMAC1_CLK_SELECT_CRU	GRF_CLR_BIT(12)
+#define RK3528_GMAC1_CLK_SELECT_IO	GRF_BIT(12)
+
+#define RK3528_GMAC0_CLK_RMII_DIV2	GRF_BIT(3)
+#define RK3528_GMAC0_CLK_RMII_DIV20	GRF_CLR_BIT(3)
+#define RK3528_GMAC1_CLK_RMII_DIV2	GRF_BIT(10)
+#define RK3528_GMAC1_CLK_RMII_DIV20	GRF_CLR_BIT(10)
+
+#define RK3528_GMAC1_CLK_RGMII_DIV1	(GRF_CLR_BIT(11) | GRF_CLR_BIT(10))
+#define RK3528_GMAC1_CLK_RGMII_DIV5	(GRF_BIT(11) | GRF_BIT(10))
+#define RK3528_GMAC1_CLK_RGMII_DIV50	(GRF_BIT(11) | GRF_CLR_BIT(10))
+
+#define RK3528_GMAC0_CLK_RMII_GATE	GRF_BIT(2)
+#define RK3528_GMAC0_CLK_RMII_NOGATE	GRF_CLR_BIT(2)
+#define RK3528_GMAC1_CLK_RMII_GATE	GRF_BIT(9)
+#define RK3528_GMAC1_CLK_RMII_NOGATE	GRF_CLR_BIT(9)
+
+static void rk3528_set_to_rgmii(struct rk_priv_data *bsp_priv,
+				int tx_delay, int rx_delay)
+{
+	regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5,
+		     RK3528_GMAC1_PHY_INTF_SEL_RGMII);
+
+	regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5,
+		     DELAY_ENABLE(RK3528, tx_delay, rx_delay));
+
+	regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON6,
+		     RK3528_GMAC_CLK_RX_DL_CFG(rx_delay) |
+		     RK3528_GMAC_CLK_TX_DL_CFG(tx_delay));
+}
+
+static void rk3528_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	if (bsp_priv->id == 1)
+		regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5,
+			     RK3528_GMAC1_PHY_INTF_SEL_RMII);
+	else
+		regmap_write(bsp_priv->grf, RK3528_VO_GRF_GMAC_CON,
+			     RK3528_GMAC0_PHY_INTF_SEL_RMII |
+			     RK3528_GMAC0_CLK_RMII_DIV2);
+}
+
+static void rk3528_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (speed == 10)
+		regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5,
+			     RK3528_GMAC1_CLK_RGMII_DIV50);
+	else if (speed == 100)
+		regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5,
+			     RK3528_GMAC1_CLK_RGMII_DIV5);
+	else if (speed == 1000)
+		regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5,
+			     RK3528_GMAC1_CLK_RGMII_DIV1);
+	else
+		dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
+}
+
+static void rk3528_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+	unsigned int reg, val;
+
+	if (speed == 10)
+		val = bsp_priv->id == 1 ? RK3528_GMAC1_CLK_RMII_DIV20 :
+					  RK3528_GMAC0_CLK_RMII_DIV20;
+	else if (speed == 100)
+		val = bsp_priv->id == 1 ? RK3528_GMAC1_CLK_RMII_DIV2 :
+					  RK3528_GMAC0_CLK_RMII_DIV2;
+	else {
+		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+		return;
+	}
+
+	reg = bsp_priv->id == 1 ? RK3528_VPU_GRF_GMAC_CON5 :
+				  RK3528_VO_GRF_GMAC_CON;
+
+	regmap_write(bsp_priv->grf, reg, val);
+}
+
+static void rk3528_set_clock_selection(struct rk_priv_data *bsp_priv,
+				       bool input, bool enable)
+{
+	unsigned int val;
+
+	if (bsp_priv->id == 1) {
+		val = input ? RK3528_GMAC1_CLK_SELECT_IO :
+			      RK3528_GMAC1_CLK_SELECT_CRU;
+		val |= enable ? RK3528_GMAC1_CLK_RMII_NOGATE :
+				RK3528_GMAC1_CLK_RMII_GATE;
+		regmap_write(bsp_priv->grf, RK3528_VPU_GRF_GMAC_CON5, val);
+	} else {
+		val = enable ? RK3528_GMAC0_CLK_RMII_NOGATE :
+			       RK3528_GMAC0_CLK_RMII_GATE;
+		regmap_write(bsp_priv->grf, RK3528_VO_GRF_GMAC_CON, val);
+	}
+}
+
+static const struct rk_gmac_ops rk3528_ops = {
+	.set_to_rgmii = rk3528_set_to_rgmii,
+	.set_to_rmii = rk3528_set_to_rmii,
+	.set_rgmii_speed = rk3528_set_rgmii_speed,
+	.set_rmii_speed = rk3528_set_rmii_speed,
+	.set_clock_selection = rk3528_set_clock_selection,
+	.regs_valid = true,
+	.regs = {
+		0xffbd0000, /* gmac0 */
+		0xffbe0000, /* gmac1 */
+		0x0, /* sentinel */
+	},
+};
+
 #define RK3568_GRF_GMAC0_CON0		0x0380
 #define RK3568_GRF_GMAC0_CON1		0x0384
 #define RK3568_GRF_GMAC1_CON0		0x0388
@@ -1816,6 +1947,7 @@  static const struct of_device_id rk_gmac_dwmac_match[] = {
 	{ .compatible = "rockchip,rk3366-gmac", .data = &rk3366_ops },
 	{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
 	{ .compatible = "rockchip,rk3399-gmac", .data = &rk3399_ops },
+	{ .compatible = "rockchip,rk3528-gmac", .data = &rk3528_ops },
 	{ .compatible = "rockchip,rk3568-gmac", .data = &rk3568_ops },
 	{ .compatible = "rockchip,rk3576-gmac", .data = &rk3576_ops },
 	{ .compatible = "rockchip,rk3588-gmac", .data = &rk3588_ops },