From patchwork Fri Mar 7 00:57:09 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 14005661 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id CFD0CC282EC for ; Fri, 7 Mar 2025 01:22:43 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=z+uQ2Wn4ySNjA4YqhL8upI/rtbTDYMIRJfwFcarTlc8=; b=qxWnUFMBeajJN0GqLb3wrzAj4L btXytXck0FBrKaCvPs/UOZkvxFhtDkpaOIJmt4jnKjQRMSq4Xa7hVuREMgYsKWYtyEXx8e6g3rf0H P8P5bsW9joa5z7nt4ybZMakUoWShiBXBOLuXqjgjPf/RhXrso5vVrbB2ssUk2tIOj6mNjEbwM9CCS JrNQOgftZlR6eB/aJS3hBChtBYJp2dEHmUW6uVkvuufy+2kcVXtoWCadMYrwHzeECGXUdyEMCeDKJ p6FZiAw38AuS7pcMmB8VtOVNvXVB8CdYk7xELub3mC7fB2UInvjPMbqaLu2X/gmPsQFVr/xBylUZ8 jNJy6RNQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1tqMQ5-0000000CmxO-0X3m; Fri, 07 Mar 2025 01:22:33 +0000 Received: from foss.arm.com ([217.140.110.172]) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1tqM25-0000000ChzN-0rqs for linux-arm-kernel@lists.infradead.org; Fri, 07 Mar 2025 00:57:46 +0000 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id AE2991BC0; Thu, 6 Mar 2025 16:57:57 -0800 (PST) Received: from localhost.localdomain (usa-sjc-mx-foss1.foss.arm.com [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 7B9A03F5A1; Thu, 6 Mar 2025 16:57:43 -0800 (PST) From: Andre Przywara To: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org Subject: [PATCH v3 12/15] arm64: dts: allwinner: a523: add X96Q-Pro+ support Date: Fri, 7 Mar 2025 00:57:09 +0000 Message-ID: <20250307005712.16828-13-andre.przywara@arm.com> X-Mailer: git-send-email 2.46.3 In-Reply-To: <20250307005712.16828-1-andre.przywara@arm.com> References: <20250307005712.16828-1-andre.przywara@arm.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20250306_165745_333422_DDF6090E X-CRM114-Status: GOOD ( 21.41 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The X96QPro+ is a TV box using the Allwinner H728 SoC. That SoC seems to be a package variant of the A523 family, at least it uses the same SoC ID and is compatible as far as we can assess. It comes with the following specs: - Allwinner H728 SoC: 8 Arm Cortex-A55 cores, Mali-G57 MC1 GPU - 2 or 4GiB DDR3L DRAM - 32, 64, or 128 GiB eMMC flash - AXP717 + AXP323 PMICs - Gigabit Ethernet (using MAXIO PHY) - HDMI port - 2 * USB 2.0 ports - 1 * USB 3.0 port - microSD card slot - TOSLINK digital audio output - 3.5mm A/V port - infrared sensor - 7-segment display - 5V barrel plug power supply - power button The PCB provides holes for soldering a UART header or cable, this is connected to the debug UART0. There is another set of UART pins available. The board also features a FEL button (accessible through the 3.5mm socket) and a reset button (only accessible when case is open). This .dts just describes the basic peripherals as far as we support them at the moment. The PMIC rail assignments are reverse engineered as far as possible, by dumping them from a running Android system, and correlating them to other boards using the same SoC. Signed-off-by: Andre Przywara Acked-by: Jernej Skrabec --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun55i-h728-x96qpro+.dts | 287 ++++++++++++++++++ 2 files changed, 288 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 0d678a7499e3c..983be49ea6ef8 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -52,4 +52,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts new file mode 100644 index 0000000000000..c0bce3f4fa925 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (C) 2024 Arm Ltd. + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include + +/ { + model = "X96Q Pro+"; + compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the barrel plug */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* 3.3V dummy supply for the SD card */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_DOWN)>; /* PF6 */ + bus-width = <4>; + disable-wp; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_cldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <®_cldo1>; + vcc-pd-supply = <®_dcdc4>; + vcc-pe-supply = <®_dcdc4>; + vcc-pf-supply = <®_cldo3>; /* actually switchable */ + vcc-pg-supply = <®_bldo1>; + vcc-ph-supply = <®_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <®_dcdc4>; + vcc-pj-supply = <®_dcdc4>; + vcc-pk-supply = <®_bldo3>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@34 { + compatible = "x-powers,axp717"; + reg = <0x34>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin4-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.0(?) GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdc4: dcdc4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd-dcdc4"; + }; + + reg_aldo1: aldo1 { + /* not connected */ + }; + + reg_aldo2: aldo2 { + /* not connected */ + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-aldo3"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-wifi-lvds"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dram-1v8"; + }; + + reg_bldo3: bldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-bldo3"; + }; + + reg_bldo4: bldo4 { + /* not connected */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-codec-sd"; + }; + + reg_cldo2: cldo2 { + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-codec-eth-sd"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-eth-phy"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + aldo1 { + /* not connected */ + }; + + dldo1 { + /* not connected */ + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-name = "vdd-dcdc3"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <®_aldo3>; + */ + vcc-pm-supply = <®_aldo3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + /* USB0 is a USB-A receptacle, always powered, so force host mode. */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +};