[v3,13/15] arm64: dts: allwinner: a523: add Radxa A5E support

Message ID	20250307005712.16828-14-andre.przywara@arm.com (mailing list archive)
State	New
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Samuel Holland <samuel@sholland.org> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org Subject: [PATCH v3 13/15] arm64: dts: allwinner: a523: add Radxa A5E support Date: Fri, 7 Mar 2025 00:57:10 +0000 Message-ID: <20250307005712.16828-14-andre.przywara@arm.com> In-Reply-To: <20250307005712.16828-1-andre.przywara@arm.com> References: <20250307005712.16828-1-andre.przywara@arm.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	arm64: dts: allwinner: Add basic Allwinner A523 support \| expand [v3,00/15] arm64: dts: allwinner: Add basic Allwinner A523 support [v3,01/15] dt-bindings: mmc: sunxi: Simplify compatible string listing [v3,02/15] dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523 [v3,03/15] dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string [v3,04/15] watchdog: sunxi_wdt: Add support for Allwinner A523 [v3,05/15] dt-bindings: irq: sun7i-nmi: document the Allwinner A523 NMI controller [v3,06/15] irqchip/sunxi-nmi: Support Allwinner A523 NMI controller [v3,07/15] dt-bindings: phy: document Allwinner A523 USB-2.0 PHY [v3,08/15] arm64: dts: allwinner: Add Allwinner A523 .dtsi file [v3,09/15] dt-bindings: vendor-prefixes: Add YuzukiHD name [v3,10/15] dt-bindings: arm: sunxi: Add new board names for A523 generation [v3,11/15] arm64: dts: allwinner: a523: add Avaota-A1 router support [v3,12/15] arm64: dts: allwinner: a523: add X96Q-Pro+ support [v3,13/15] arm64: dts: allwinner: a523: add Radxa A5E support [v3,14/15] dt-bindings: arm: sunxi: Add YuzukiHD Chameleon board name [v3,15/15] arm64: dts: allwinner: h616: add YuzukiHD Chameleon support

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 983be49ea6ef8..9d5e14695af0b 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -52,5 +52,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-radxa-a5e.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts new file mode 100644 index 0000000000000..912e1bda974ce --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (C) 2025 Arm Ltd. + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Radxa A5E"; + compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the USB-C connector */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&reg_vcc5v>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <&reg_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_DOWN)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <&reg_cldo1>; + vcc-pd-supply = <&reg_cldo3>; + vcc-pe-supply = <&reg_aldo2>; + vcc-pf-supply = <&reg_cldo3>; /* actually switchable */ + vcc-pg-supply = <&reg_bldo1>; + vcc-ph-supply = <&reg_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <&reg_cldo3>; + vcc-pj-supply = <&reg_cldo4>; + vcc-pk-supply = <&reg_cldo1>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@34 { + compatible = "x-powers,axp717"; + reg = <0x34>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + vin4-supply = <&reg_vcc5v>; + aldoin-supply = <&reg_vcc5v>; + bldoin-supply = <&reg_vcc5v>; + cldoin-supply = <&reg_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.4 GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-dram"; + }; + + reg_aldo1: aldo1 { + /* not connected */ + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_aldo3: aldo3 { + /* supplies the I2C pins for this PMIC */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-usb"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-iowifi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-lpddr4"; + }; + + reg_bldo3: bldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi-cam"; + }; + + reg_bldo4: bldo4 { + /* not connected */ + }; + + reg_cldo1: cldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pc-and-their-dog"; + }; + + reg_cldo2: cldo2 { + /* not connected */ + }; + + reg_cldo3: cldo3 { + /* IO, USB-2, 3V3, card, NAND, sensor, PI */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc-spi-ana"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pj-phy"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + + regulators { + aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-mipi-dsi"; + }; + + dldo1 { + /* not connected */ + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + /* RISC-V management core supply */ + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dnr"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <&reg_aldo3>; + */ + vcc-pm-supply = <&reg_aldo3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + /* + * The USB-C port is the primary power supply, so in this configuration + * relies on the other end of the USB cable to supply the VBUS power. + * So use this port in peripheral mode. + * It is possible to supply the board with the 5V pins on the GPIO + * header, and since the DCIN_5V line is hardwired to the USB-C VBUS + * pins, the port turns into a host port, unconditionally supplying + * power. The dr_mode property should be changed to "host" here, if + * users choose this setup. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +/* + * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to + * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same + * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power + * input rail. + * None of them seem to make any sense in relation to detecting USB devices + * or whether there is power provided via any USB pins: they would always + * report high, otherwise the system wouldn't be running. + * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is + * not connected to those pins of the USB-C connector. + */ +&usbphy { + usb0_vbus-supply = <&reg_vcc5v>; + usb1_vbus-supply = <&reg_usb_vbus>; + status = "okay"; +};

[v3,13/15] arm64: dts: allwinner: a523: add Radxa A5E support

Commit Message

Patch