@@ -59,6 +59,7 @@ cpu0: cpu@0 {
reg = <0x0>;
device_type = "cpu";
enable-method = "psci";
+ clocks = <&scmi_clk SCMI_CLK_CPU>;
};
cpu1: cpu@1 {
@@ -66,6 +67,7 @@ cpu1: cpu@1 {
reg = <0x1>;
device_type = "cpu";
enable-method = "psci";
+ clocks = <&scmi_clk SCMI_CLK_CPU>;
};
cpu2: cpu@2 {
@@ -73,6 +75,7 @@ cpu2: cpu@2 {
reg = <0x2>;
device_type = "cpu";
enable-method = "psci";
+ clocks = <&scmi_clk SCMI_CLK_CPU>;
};
cpu3: cpu@3 {
@@ -80,6 +83,22 @@ cpu3: cpu@3 {
reg = <0x3>;
device_type = "cpu";
enable-method = "psci";
+ clocks = <&scmi_clk SCMI_CLK_CPU>;
+ };
+ };
+
+ firmware {
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0x82000010>;
+ shmem = <&scmi_shmem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
};
};
@@ -88,6 +107,18 @@ psci {
method = "smc";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scmi_shmem: shmem@10f000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x0010f000 0x0 0x100>;
+ no-map;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Same as RK3568, RK3528 uses SCMI clk instead of ARMCLK. Add SCMI clk for CPU, GPU and RNG will also use it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> --- arch/arm64/boot/dts/rockchip/rk3528.dtsi | 31 ++++++++++++++++++++++++ 1 file changed, 31 insertions(+)