[2/3] usb: chipidea: ci_hdrc_imx: disable regulator on error path in probe

Commit Message

Fedor Pchelkin March 9, 2025, 5:57 p.m. UTC

Upon encountering errors during the HSIC pinctrl handling section the
regulator should be disabled.

After the above-stated changes it is possible to jump onto
"disable_hsic_regulator" label without having added the CPU latency QoS
request previously. This would result in cpu_latency_qos_remove_request()
yielding a WARNING.

So rearrange the error handling path to follow the reverse order of
different probing phases.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 4d6141288c33 ("usb: chipidea: imx: pinctrl for HSIC is optional")
Cc: [e-mail]
Signed-off-by: Fedor Pchelkin <[e-mail]>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 619779eef333..3f11ae071c7f 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -407,13 +407,13 @@  static int ci_hdrc_imx_probe(struct platform_device *pdev)
 				"pinctrl_hsic_idle lookup failed, err=%ld\n",
 					PTR_ERR(pinctrl_hsic_idle));
 			ret = PTR_ERR(pinctrl_hsic_idle);
-			goto err_put;
+			goto disable_hsic_regulator;
 		}
 
 		ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle);
 		if (ret) {
 			dev_err(dev, "hsic_idle select failed, err=%d\n", ret);
-			goto err_put;
+			goto disable_hsic_regulator;
 		}
 
 		data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl,
@@ -423,7 +423,7 @@  static int ci_hdrc_imx_probe(struct platform_device *pdev)
 				"pinctrl_hsic_active lookup failed, err=%ld\n",
 					PTR_ERR(data->pinctrl_hsic_active));
 			ret = PTR_ERR(data->pinctrl_hsic_active);
-			goto err_put;
+			goto disable_hsic_regulator;
 		}
 	}
 
@@ -432,11 +432,11 @@  static int ci_hdrc_imx_probe(struct platform_device *pdev)
 
 	ret = imx_get_clks(dev);
 	if (ret)
-		goto disable_hsic_regulator;
+		goto qos_remove_request;
 
 	ret = imx_prepare_enable_clks(dev);
 	if (ret)
-		goto disable_hsic_regulator;
+		goto qos_remove_request;
 
 	ret = clk_prepare_enable(data->clk_wakeup);
 	if (ret)
@@ -526,12 +526,13 @@  static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	clk_disable_unprepare(data->clk_wakeup);
 err_wakeup_clk:
 	imx_disable_unprepare_clks(dev);
+qos_remove_request:
+	if (pdata.flags & CI_HDRC_PMQOS)
+		cpu_latency_qos_remove_request(&data->pm_qos_req);
 disable_hsic_regulator:
 	if (data->hsic_pad_regulator)
 		/* don't overwrite original ret (cf. EPROBE_DEFER) */
 		regulator_disable(data->hsic_pad_regulator);
-	if (pdata.flags & CI_HDRC_PMQOS)
-		cpu_latency_qos_remove_request(&data->pm_qos_req);
 	data->ci_pdev = NULL;
 err_put:
 	if (data->usbmisc_data)