| Message ID | 20250311122327.20685-2-friday.yang@mediatek.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add SMI reset and clamp for MediaTek MT8188 SoC | expand |
On Tue, 11 Mar 2025 20:23:21 +0800, Friday Yang wrote: > From: "Friday Yang" <friday.yang@mediatek.com> > > On the MediaTek platform, some SMI LARBs are directly connected to > the SMI Common, while others are connected to the SMI Sub-Common, > which in turn is connected to the SMI Common. The hardware block > diagram can be described as follows. > > SMI-Common(Smart Multimedia Interface Common) > | > +----------------+------------------+ > | | | > | | | > | | | > | | | > | | | > larb0 SMI-Sub-Common0 SMI-Sub-Common1 > | | | | | > larb1 larb2 larb3 larb7 larb9 > > For previous discussion on the direction of the code modifications, > please refer to: > https://lore.kernel.org/all/CAFGrd9qZhObQXvm2_abqaX83xMLqxjQETB2=wXpobDWU1CnvkA@mail.gmail.com/ > https://lore.kernel.org/all/CAPDyKFpokXV2gJDgowbixTvOH_5VL3B5H8eyhP+KJ5Fasm2rFg@mail.gmail.com/ > > On the MediaTek MT8188 SoC platform, we encountered power-off failures > and SMI bus hang issues during camera stress tests. The issue arises > because bus glitches are sometimes produced when MTCMOS powers on or > off. While this is fairly normal, the software must handle these > glitches to avoid mistaking them for transaction signals. What's > more, this issue emerged only after the initial upstreaming of this > binding. Without these patches, the SMI becomes unstable during camera > stress tests. > > The software solutions can be summarized as follows: > > 1. Use CLAMP to disable the SMI sub-common port after turning off the > LARB CG and before turning off the LARB MTCMOS. > 2. Use CLAMP to disable/enable the SMI sub-common port. > 3. Implement an AXI reset for SMI LARBs. > > This patch primarily add two changes: > 1. Add compatible for SMI sub-common on MT8188 SoC. > 2. Add 'resets' and 'reset-names' properties for SMI LARBs to > support SMI reset operations. > > Signed-off-by: Friday Yang <friday.yang@mediatek.com> > --- > .../mediatek,smi-common.yaml | 2 ++ > .../memory-controllers/mediatek,smi-larb.yaml | 19 +++++++++++++++++++ > 2 files changed, 21 insertions(+) > Acked-by: Rob Herring (Arm) <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml index 2f36ac23604c..4392d349878c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml @@ -39,6 +39,7 @@ properties: - mediatek,mt8186-smi-common - mediatek,mt8188-smi-common-vdo - mediatek,mt8188-smi-common-vpp + - mediatek,mt8188-smi-sub-common - mediatek,mt8192-smi-common - mediatek,mt8195-smi-common-vdo - mediatek,mt8195-smi-common-vpp @@ -107,6 +108,7 @@ allOf: compatible: contains: enum: + - mediatek,mt8188-smi-sub-common - mediatek,mt8195-smi-sub-common then: required: diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index 2381660b324c..f4f0ed0f1fd9 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -69,6 +69,12 @@ properties: description: the hardware id of this larb. It's only required when this hardware id is not consecutive from its M4U point of view. + resets: + maxItems: 1 + + reset-names: + const: larb + required: - compatible - reg @@ -125,6 +131,19 @@ allOf: required: - mediatek,larb-id + - if: # only for image, camera and ipe subsys + properties: + compatible: + const: mediatek,mt8188-smi-larb + mediatek,larb-id: + enum: + [ 9, 10, 11, 12, 13, 16, 17, 18, 19, 20 ] + + then: + required: + - resets + - reset-names + additionalProperties: false examples: