@@ -304,27 +304,6 @@ i2c30mux0ch7: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
-
- power-sensor@40 {
- compatible = "ti,ina230";
- reg = <0x40>;
- shunt-resistor = <2000>;
- };
- power-sensor@41 {
- compatible = "ti,ina230";
- reg = <0x41>;
- shunt-resistor = <2000>;
- };
- power-sensor@44 {
- compatible = "ti,ina230";
- reg = <0x44>;
- shunt-resistor = <2000>;
- };
- power-sensor@45 {
- compatible = "ti,ina230";
- reg = <0x45>;
- shunt-resistor = <2000>;
- };
};
};
};
@@ -492,35 +471,11 @@ power-sensor@22 {
compatible = "mps,mp5990";
reg = <0x22>;
};
- power-sensor@41 {
- compatible = "ti,ina238";
- reg = <0x41>;
- shunt-resistor = <500>;
- };
- power-sensor@42 {
- compatible = "ti,ina238";
- reg = <0x42>;
- shunt-resistor = <500>;
- };
- power-sensor@44 {
- compatible = "ti,ina238";
- reg = <0x44>;
- shunt-resistor = <500>;
- };
};
i2c1mux0ch1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
-
- power-sensor@41 {
- compatible = "ti,ina238";
- reg = <0x41>;
- };
- power-sensor@43 {
- compatible = "ti,ina238";
- reg = <0x43>;
- };
};
i2c1mux0ch2: i2c@2 {
#address-cells = <1>;
Remove INA238 and INA230 power sensor nodes from the device tree (DTS) due to incompatibility with the second-source ISL28022, which shares the same I2C address. Move the driver probe to userspace to handle sensor dynamically. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> --- .../dts/aspeed/aspeed-bmc-facebook-catalina.dts | 45 ---------------------- 1 file changed, 45 deletions(-)