@@ -642,9 +642,6 @@ config ARM64_ERRATUM_843419
If unsure, say Y.
-config ARM64_LD_HAS_FIX_ERRATUM_843419
- def_bool $(ld-option,--fix-cortex-a53-843419)
-
config ARM64_ERRATUM_1024718
bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
default y
@@ -1890,13 +1887,9 @@ config ARM64_PAN
The feature is detected at runtime, and will remain as a 'nop'
instruction if the cpu does not implement the feature.
-config AS_HAS_LSE_ATOMICS
- def_bool $(as-instr,.arch_extension lse)
-
config ARM64_LSE_ATOMICS
bool
default ARM64_USE_LSE_ATOMICS
- depends on AS_HAS_LSE_ATOMICS
config ARM64_USE_LSE_ATOMICS
bool "Atomic instructions"
@@ -1908,20 +1901,12 @@ config ARM64_USE_LSE_ATOMICS
Say Y here to make use of these instructions for the in-kernel
atomic routines. This incurs a small overhead on CPUs that do
- not support these instructions and requires the kernel to be
- built with binutils >= 2.25 in order for the new instructions
- to be used.
+ not support these instructions.
endmenu # "ARMv8.1 architectural features"
menu "ARMv8.2 architectural features"
-config AS_HAS_ARMV8_2
- def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
- def_bool $(as-instr,.arch armv8.2-a+sha3)
-
config ARM64_PMEM
bool "Enable support for persistent memory"
select ARCH_HAS_PMEM_API
@@ -1995,7 +1980,6 @@ config ARM64_PTR_AUTH_KERNEL
bool "Use pointer authentication for kernel"
default y
depends on ARM64_PTR_AUTH
- depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
# Modern compilers insert a .note.gnu.property section note for PAC
# which is only understood by binutils starting with version 2.33.1.
depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
@@ -2016,19 +2000,10 @@ config CC_HAS_BRANCH_PROT_PAC_RET
# GCC 9 or later, clang 8 or later
def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
-config CC_HAS_SIGN_RETURN_ADDRESS
- # GCC 7, 8
- def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_ARMV8_3
- def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
config AS_HAS_CFI_NEGATE_RA_STATE
+ # binutils 2.34+
def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
-config AS_HAS_LDAPR
- def_bool $(as-instr,.arch_extension rcpc)
-
endmenu # "ARMv8.3 architectural features"
menu "ARMv8.4 architectural features"
@@ -2056,20 +2031,13 @@ config ARM64_AMU_EXTN
correctly reflect reality. Most commonly, the value read will be 0,
indicating that the counter is not enabled.
-config AS_HAS_ARMV8_4
- def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
config ARM64_TLB_RANGE
bool "Enable support for tlbi range feature"
default y
- depends on AS_HAS_ARMV8_4
help
ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
range of input addresses.
- The feature introduces new assembly instructions, and they were
- support when binutils >= 2.30.
-
endmenu # "ARMv8.4 architectural features"
menu "ARMv8.5 architectural features"
@@ -2145,7 +2113,6 @@ config ARM64_MTE
default y
depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
depends on AS_HAS_ARMV8_5
- depends on AS_HAS_LSE_ATOMICS
# Required for tag checking in the uaccess routines
select ARM64_PAN
select ARCH_HAS_SUBPAGE_FAULTS
@@ -16,14 +16,11 @@ ifeq ($(CONFIG_RELOCATABLE), y)
# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
# for relative relocs, since this leads to better Image compression
# with the relocation offsets always being zero.
-LDFLAGS_vmlinux += -shared -Bsymbolic -z notext \
- $(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux += -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
endif
ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
- ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
LDFLAGS_vmlinux += --fix-cortex-a53-843419
- endif
endif
cc_has_k_constraint := $(call try-run,echo \
@@ -105,12 +102,8 @@ endif
# hardware.
ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
asm-arch := armv8.5-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+else
asm-arch := armv8.4-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
- asm-arch := armv8.3-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
- asm-arch := armv8.2-a
endif
ifdef asm-arch
@@ -201,16 +194,6 @@ install zinstall:
archprepare:
$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
- ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
- @echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
- endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
- ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
- @echo "warning: LSE atomics not supported by binutils" >&2
- endif
-endif
ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
@@ -12,16 +12,12 @@
#ifndef BUILD_VDSO
-#ifdef CONFIG_AS_HAS_LDAPR
#define __LOAD_RCPC(sfx, regs...) \
ALTERNATIVE( \
"ldar" #sfx "\t" #regs, \
".arch_extension rcpc\n" \
"ldapr" #sfx "\t" #regs, \
ARM64_HAS_LDAPR)
-#else
-#define __LOAD_RCPC(sfx, regs...) "ldar" #sfx "\t" #regs
-#endif /* CONFIG_AS_HAS_LDAPR */
/*
* When building with LTO, there is an increased risk of the compiler
@@ -19,7 +19,6 @@ if VIRTUALIZATION
menuconfig KVM
bool "Kernel-based Virtual Machine (KVM) support"
- depends on AS_HAS_ARMV8_4
select KVM_COMMON
select KVM_GENERIC_HARDWARE_ENABLING
select KVM_GENERIC_MMU_NOTIFIER
@@ -319,7 +319,7 @@ static void xor_arm64_eor3_5(unsigned long bytes,
static int __init xor_neon_init(void)
{
- if (IS_ENABLED(CONFIG_AS_HAS_SHA3) && cpu_have_named_feature(SHA3)) {
+ if (cpu_have_named_feature(SHA3)) {
xor_block_inner_neon.do_3 = xor_arm64_eor3_3;
xor_block_inner_neon.do_4 = xor_arm64_eor3_4;
xor_block_inner_neon.do_5 = xor_arm64_eor3_5;