| Message ID | 20250408025930.1863551-4-hongxing.zhu@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add some enhancements for i.MX95 PCIe | expand |
Hi, Am Dienstag, 8. April 2025, 04:59:26 CEST schrieb Richard Zhu: > Add the cold reset toggle for i.MX95 PCIe to align PHY's power up sequency. > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > Reviewed-by: Frank Li <Frank.Li@nxp.com> > --- > drivers/pci/controller/dwc/pci-imx6.c | 42 +++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index c5871c3d4194..7c60b712480a 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -71,6 +71,9 @@ > #define IMX95_SID_MASK GENMASK(5, 0) > #define IMX95_MAX_LUT 32 > > +#define IMX95_PCIE_RST_CTRL 0x3010 > +#define IMX95_PCIE_COLD_RST BIT(0) > + > #define to_imx_pcie(x) dev_get_drvdata((x)->dev) > > enum imx_pcie_variants { > @@ -773,6 +776,43 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > return 0; > } > > +static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > +{ > + u32 val; > + > + if (assert) { > + /* > + * From i.MX95 PCIe PHY perspective, the COLD reset toggle > + * should be complete after power-up by the following sequence. > + * > 10us(at power-up) > + * > 10ns(warm reset) > + * |<------------>| > + * ______________ > + * phy_reset ____/ \________________ > + * ____________ > + * ref_clk_en_______________________/ > + * Toggle COLD reset aligned with this sequence for i.MX95 PCIe. > + */ > + regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + IMX95_PCIE_COLD_RST); > + /* > + * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the > + * hardware by doing a read. Otherwise, there is no guarantee > + * that the write has reached the hardware before udelay(). > + */ > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + &val); > + udelay(15); > + regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + IMX95_PCIE_COLD_RST); > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + &val); > + udelay(10); > + } > + > + return 0; > +} > + > static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) > { > reset_control_assert(imx_pcie->pciephy_reset); > @@ -1739,6 +1779,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .ltssm_mask = IMX95_PCIE_LTSSM_EN, > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > + .core_reset = imx95_pcie_core_reset, > .init_phy = imx95_pcie_init_phy, > }, > [IMX8MQ_EP] = { > @@ -1792,6 +1833,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > .init_phy = imx95_pcie_init_phy, > + .core_reset = imx95_pcie_core_reset, > .epc_features = &imx95_pcie_epc_features, > .mode = DW_PCIE_EP_TYPE, > }, > This change introduces an invalid memory access on my platform. There is not even a PCIe device attached to it. > imx6q-pcie 4c380000.pcie: host bridge /soc/pcie@4c380000 ranges: > imx6q-pcie 4c300000.pcie: host bridge /soc/pcie@4c300000 ranges: > imx6q-pcie 4c380000.pcie: IO 0x088ff00000..0x088fffffff -> 0x0000000000 > imx6q-pcie 4c300000.pcie: IO 0x006ff00000..0x006fffffff -> 0x0000000000 > imx6q-pcie 4c380000.pcie: MEM 0x0a10000000..0x0a1fffffff -> 0x0010000000 > imx6q-pcie 4c300000.pcie: MEM 0x0910000000..0x091fffffff -> 0x0010000000 > imx6q-pcie 4c380000.pcie: config reg[1] 0x880100000 == cpu 0x880100000 > ; no fixup was ever needed for this devicetree > imx6q-pcie 4c300000.pcie: config reg[1] 0x60100000 == cpu 0x60100000 > ; no fixup was ever needed for this devicetree > Unable to handle kernel paging request at virtual address ffff800081dc5010 > Unable to handle kernel paging request at virtual address ffff8000821bd010 > Mem abort info: > > Mem abort info: > ESR = 0x0000000096000007 > ESR = 0x0000000096000007 > EC = 0x25: DABT (current EL), IL = 32 bits > EC = 0x25: DABT (current EL), IL = 32 bits > > fsl_enetc_mdio 0003:01:00.0: enabling device (0000 -> 0002) > > SET = 0, FnV = 0 > SET = 0, FnV = 0 > EA = 0, S1PTW = 0 > EA = 0, S1PTW = 0 > FSC = 0x07: level 3 translation fault > FSC = 0x07: level 3 translation fault > > Data abort info: > > Data abort info: > ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 > ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 > CM = 0, WnR = 0, TnD = 0, TagAccess = 0 > CM = 0, WnR = 0, TnD = 0, TagAccess = 0 > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 > > swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000091a47000 > swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000091a47000 > [ffff800081dc5010] pgd=1000000092002003 > [ffff8000821bd010] pgd=1000000092002003 > , p4d=1000000092002003 > , p4d=1000000092002003 > , pud=1000000092003003 > , pud=1000000092003003 > , pmd=1000000092008003 > , pmd=100000009299f403 > , pte=0000000000000000 > , pte=0000000000000000 > > > Internal error: Oops: 0000000096000007 [#1] SMP > Modules linked in: > CPU: 0 UID: 0 PID: 63 Comm: kworker/u24:4 Tainted: G T > 6.15.0-rc1-next-20250409+ #3009 PREEMPT > f6bd3cc6346487744ae55f6115e728ff2bc7088b Tainted: [T]=RANDSTRUCT > Hardware name: TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2 (DT) > Workqueue: async async_run_entry_fn > pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > pc : regmap_mmio_read32le+0x1c/0x3c > lr : regmap_mmio_read+0x40/0x68 > sp : ffff80008223b860 > x29: ffff80008223b860 x28: ffff00001000c800 x27: ffff8000818679c0 > x26: ffff000013340410 x25: 0000000000000001 x24: 0000000000000000 > x23: ffff000012f5e400 x22: ffff80008223b934 x21: ffff80008223b934 > x20: ffff000012fc4900 x19: 0000000000003010 x18: 00000000a7aa953f > x17: 3e2d206666666666 x16: 666631393078302e x15: 2e30303030303030 > x14: 3139307830204d45 x13: 3030303030303031 x12: 30307830203e2d20 > x11: 6666666666666631 x10: 393078302e2e3030 x9 : 4d2020202020203a > x8 : 656963702e303030 x7 : 205d313236353838 x6 : ffff0000134e0000 > x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff8000809bf028 > x2 : ffff8000809bfb0c x1 : 0000000000003010 x0 : ffff800081dc5010 > > Call trace: > regmap_mmio_read32le+0x1c/0x3c (P) > regmap_mmio_read+0x40/0x68 > _regmap_bus_reg_read+0x58/0x9c > _regmap_read+0x70/0x1c4 > _regmap_update_bits+0xe4/0x174 > regmap_update_bits_base+0x60/0x90 > imx95_pcie_core_reset+0x78/0xd0 > imx_pcie_assert_core_reset+0x38/0x50 > imx_pcie_host_init+0x68/0x4a0 > dw_pcie_host_init+0x16c/0x500 > imx_pcie_probe+0x2f4/0x71c > platform_probe+0x64/0x100 > really_probe+0xc8/0x3bc > __driver_probe_device+0x84/0x16c > driver_probe_device+0x40/0x160 > __device_attach_driver+0xcc/0x1a0 > bus_for_each_drv+0x88/0xe4 > __device_attach_async_helper+0xac/0x108 > async_run_entry_fn+0x30/0x144 > process_one_work+0x14c/0x3e0 > worker_thread+0x2f0/0x3fc > kthread+0x128/0x1ec > ret_from_fork+0x10/0x20 > > Code: aa0003f4 2a0103f3 f9400280 8b334000 (b9400000) > ---[ end trace 0000000000000000 ]--- > note: kworker/u24:4[63] exited with irqs disabled > Internal error: Oops: 0000000096000007 [#2] SMP > Modules linked in: > note: kworker/u24:4[63] exited with preempt_count 1 > > CPU: 4 UID: 0 PID: 52 Comm: kworker/u24:1 Tainted: G D T > 6.15.0-rc1-next-20250409+ #3009 PREEMPT > f6bd3cc6346487744ae55f6115e728ff2bc7088b Tainted: [D]=DIE, [T]=RANDSTRUCT > Hardware name: TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2 (DT) > Workqueue: async async_run_entry_fn > pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > pc : regmap_mmio_read32le+0x1c/0x3c > lr : regmap_mmio_read+0x40/0x68 > mmc0: new HS400 Enhanced strobe MMC card at address 0001 > sp : ffff8000821e3860 > mmcblk0: mmc0:0001 DG4016 14.7 GiB > x29: ffff8000821e3860 x28: ffff00001000c800 x27: ffff8000818679c0 > mmcblk0boot0: mmc0:0001 DG4016 4.00 MiB > x26: ffff00001333fc10 x25: 0000000000000001 x24: 0000000000000000 > x23: ffff000013895400 x22: ffff8000821e3934 x21: ffff8000821e3934 > x20: ffff0000134672c0 > mmcblk0boot1: mmc0:0001 DG4016 4.00 MiB > > x19: 0000000000003010 x18: 0000000038868210 > > x17: 3038387830207570 x16: 63203d3d20303030 x15: 3030313038387830 > x14: 205d315b67657220 > mmcblk0rpmb: mmc0:0001 DG4016 4.00 MiB, chardev (237:0) > > x13: 6565727465636976 x12: 6564207369687420 > > x11: 726f662064656465 x10: 656e207265766520 x9 : 7420726f66206465 > x8 : 6465656e20726576 x7 : 205d303033353938 x6 : ffff000013371280 > x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff8000809bf028 > x2 : ffff8000809bfb0c x1 : 0000000000003010 x0 : ffff8000821bd010 > > Call trace: > regmap_mmio_read32le+0x1c/0x3c (P) > regmap_mmio_read+0x40/0x68 > _regmap_bus_reg_read+0x58/0x9c > _regmap_read+0x70/0x1c4 > _regmap_update_bits+0xe4/0x174 > regmap_update_bits_base+0x60/0x90 > imx95_pcie_core_reset+0x78/0xd0 > imx_pcie_assert_core_reset+0x38/0x50 > imx_pcie_host_init+0x68/0x4a0 > dw_pcie_host_init+0x16c/0x500 > imx_pcie_probe+0x2f4/0x71c > platform_probe+0x64/0x100 > really_probe+0xc8/0x3bc > __driver_probe_device+0x84/0x16c > driver_probe_device+0x40/0x160 > __device_attach_driver+0xcc/0x1a0 > bus_for_each_drv+0x88/0xe4 > __device_attach_async_helper+0xac/0x108 > async_run_entry_fn+0x30/0x144 > process_one_work+0x14c/0x3e0 > worker_thread+0x2f0/0x3fc > kthread+0x128/0x1ec > ret_from_fork+0x10/0x20 > > Code: aa0003f4 2a0103f3 f9400280 8b334000 (b9400000) > ---[ end trace 0000000000000000 ]--- Is this series dependent on any other series/patches? Best regards, Alexander
On Wed, Apr 09, 2025 at 11:51:53AM +0200, Alexander Stein wrote: > Hi, > > Am Dienstag, 8. April 2025, 04:59:26 CEST schrieb Richard Zhu: > > Add the cold reset toggle for i.MX95 PCIe to align PHY's power up sequency. > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > Reviewed-by: Frank Li <Frank.Li@nxp.com> > > --- > > drivers/pci/controller/dwc/pci-imx6.c | 42 +++++++++++++++++++++++++++ > > 1 file changed, 42 insertions(+) > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > > index c5871c3d4194..7c60b712480a 100644 > > --- a/drivers/pci/controller/dwc/pci-imx6.c > > +++ b/drivers/pci/controller/dwc/pci-imx6.c > > @@ -71,6 +71,9 @@ > > #define IMX95_SID_MASK GENMASK(5, 0) > > #define IMX95_MAX_LUT 32 > > > > +#define IMX95_PCIE_RST_CTRL 0x3010 > > +#define IMX95_PCIE_COLD_RST BIT(0) > > + > > #define to_imx_pcie(x) dev_get_drvdata((x)->dev) > > > > enum imx_pcie_variants { > > @@ -773,6 +776,43 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > > return 0; > > } > > > > +static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > > +{ > > + u32 val; > > + > > + if (assert) { > > + /* > > + * From i.MX95 PCIe PHY perspective, the COLD reset toggle > > + * should be complete after power-up by the following sequence. > > + * > 10us(at power-up) > > + * > 10ns(warm reset) > > + * |<------------>| > > + * ______________ > > + * phy_reset ____/ \________________ > > + * ____________ > > + * ref_clk_en_______________________/ > > + * Toggle COLD reset aligned with this sequence for i.MX95 PCIe. > > + */ > > + regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > + IMX95_PCIE_COLD_RST); > > + /* > > + * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the > > + * hardware by doing a read. Otherwise, there is no guarantee > > + * that the write has reached the hardware before udelay(). > > + */ > > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > + &val); > > + udelay(15); > > + regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > + IMX95_PCIE_COLD_RST); > > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > + &val); > > + udelay(10); > > + } > > + > > + return 0; > > +} > > + > > static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) > > { > > reset_control_assert(imx_pcie->pciephy_reset); > > @@ -1739,6 +1779,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > > .ltssm_mask = IMX95_PCIE_LTSSM_EN, > > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > > + .core_reset = imx95_pcie_core_reset, > > .init_phy = imx95_pcie_init_phy, > > }, > > [IMX8MQ_EP] = { > > @@ -1792,6 +1833,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > > .init_phy = imx95_pcie_init_phy, > > + .core_reset = imx95_pcie_core_reset, > > .epc_features = &imx95_pcie_epc_features, > > .mode = DW_PCIE_EP_TYPE, > > }, > > > > This change introduces an invalid memory access on my platform. There is not > even a PCIe device attached to it. > > > imx6q-pcie 4c380000.pcie: host bridge /soc/pcie@4c380000 ranges: > > imx6q-pcie 4c300000.pcie: host bridge /soc/pcie@4c300000 ranges: > > imx6q-pcie 4c380000.pcie: IO 0x088ff00000..0x088fffffff -> 0x0000000000 > > imx6q-pcie 4c300000.pcie: IO 0x006ff00000..0x006fffffff -> 0x0000000000 > > imx6q-pcie 4c380000.pcie: MEM 0x0a10000000..0x0a1fffffff -> 0x0010000000 > > imx6q-pcie 4c300000.pcie: MEM 0x0910000000..0x091fffffff -> 0x0010000000 > > imx6q-pcie 4c380000.pcie: config reg[1] 0x880100000 == cpu 0x880100000 > > ; no fixup was ever needed for this devicetree > > imx6q-pcie 4c300000.pcie: config reg[1] 0x60100000 == cpu 0x60100000 > > ; no fixup was ever needed for this devicetree > > Unable to handle kernel paging request at virtual address ffff800081dc5010 > > Unable to handle kernel paging request at virtual address ffff8000821bd010 > > Mem abort info: > > > > Mem abort info: > > ESR = 0x0000000096000007 > > ESR = 0x0000000096000007 > > EC = 0x25: DABT (current EL), IL = 32 bits > > EC = 0x25: DABT (current EL), IL = 32 bits > > > > fsl_enetc_mdio 0003:01:00.0: enabling device (0000 -> 0002) > > > > SET = 0, FnV = 0 > > SET = 0, FnV = 0 > > EA = 0, S1PTW = 0 > > EA = 0, S1PTW = 0 > > FSC = 0x07: level 3 translation fault > > FSC = 0x07: level 3 translation fault > > > > Data abort info: > > > > Data abort info: > > ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 > > ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 > > CM = 0, WnR = 0, TnD = 0, TagAccess = 0 > > CM = 0, WnR = 0, TnD = 0, TagAccess = 0 > > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 > > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 > > > > swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000091a47000 > > swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000091a47000 > > [ffff800081dc5010] pgd=1000000092002003 > > [ffff8000821bd010] pgd=1000000092002003 > > , p4d=1000000092002003 > > , p4d=1000000092002003 > > , pud=1000000092003003 > > , pud=1000000092003003 > > , pmd=1000000092008003 > > , pmd=100000009299f403 > > , pte=0000000000000000 > > , pte=0000000000000000 > > > > > > Internal error: Oops: 0000000096000007 [#1] SMP > > Modules linked in: > > CPU: 0 UID: 0 PID: 63 Comm: kworker/u24:4 Tainted: G T > > 6.15.0-rc1-next-20250409+ #3009 PREEMPT > > f6bd3cc6346487744ae55f6115e728ff2bc7088b Tainted: [T]=RANDSTRUCT > > Hardware name: TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2 (DT) > > Workqueue: async async_run_entry_fn > > pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > > pc : regmap_mmio_read32le+0x1c/0x3c > > lr : regmap_mmio_read+0x40/0x68 > > sp : ffff80008223b860 > > x29: ffff80008223b860 x28: ffff00001000c800 x27: ffff8000818679c0 > > x26: ffff000013340410 x25: 0000000000000001 x24: 0000000000000000 > > x23: ffff000012f5e400 x22: ffff80008223b934 x21: ffff80008223b934 > > x20: ffff000012fc4900 x19: 0000000000003010 x18: 00000000a7aa953f > > x17: 3e2d206666666666 x16: 666631393078302e x15: 2e30303030303030 > > x14: 3139307830204d45 x13: 3030303030303031 x12: 30307830203e2d20 > > x11: 6666666666666631 x10: 393078302e2e3030 x9 : 4d2020202020203a > > x8 : 656963702e303030 x7 : 205d313236353838 x6 : ffff0000134e0000 > > x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff8000809bf028 > > x2 : ffff8000809bfb0c x1 : 0000000000003010 x0 : ffff800081dc5010 > > > > Call trace: > > regmap_mmio_read32le+0x1c/0x3c (P) > > regmap_mmio_read+0x40/0x68 > > _regmap_bus_reg_read+0x58/0x9c > > _regmap_read+0x70/0x1c4 > > _regmap_update_bits+0xe4/0x174 > > regmap_update_bits_base+0x60/0x90 > > imx95_pcie_core_reset+0x78/0xd0 > > imx_pcie_assert_core_reset+0x38/0x50 > > imx_pcie_host_init+0x68/0x4a0 > > dw_pcie_host_init+0x16c/0x500 > > imx_pcie_probe+0x2f4/0x71c > > platform_probe+0x64/0x100 > > really_probe+0xc8/0x3bc > > __driver_probe_device+0x84/0x16c > > driver_probe_device+0x40/0x160 > > __device_attach_driver+0xcc/0x1a0 > > bus_for_each_drv+0x88/0xe4 > > __device_attach_async_helper+0xac/0x108 > > async_run_entry_fn+0x30/0x144 > > process_one_work+0x14c/0x3e0 > > worker_thread+0x2f0/0x3fc > > kthread+0x128/0x1ec > > ret_from_fork+0x10/0x20 > > > > Code: aa0003f4 2a0103f3 f9400280 8b334000 (b9400000) > > ---[ end trace 0000000000000000 ]--- > > note: kworker/u24:4[63] exited with irqs disabled > > Internal error: Oops: 0000000096000007 [#2] SMP > > Modules linked in: > > note: kworker/u24:4[63] exited with preempt_count 1 > > > > CPU: 4 UID: 0 PID: 52 Comm: kworker/u24:1 Tainted: G D T > > 6.15.0-rc1-next-20250409+ #3009 PREEMPT > > f6bd3cc6346487744ae55f6115e728ff2bc7088b Tainted: [D]=DIE, [T]=RANDSTRUCT > > Hardware name: TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2 (DT) > > Workqueue: async async_run_entry_fn > > pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > > pc : regmap_mmio_read32le+0x1c/0x3c > > lr : regmap_mmio_read+0x40/0x68 > > mmc0: new HS400 Enhanced strobe MMC card at address 0001 > > sp : ffff8000821e3860 > > mmcblk0: mmc0:0001 DG4016 14.7 GiB > > x29: ffff8000821e3860 x28: ffff00001000c800 x27: ffff8000818679c0 > > mmcblk0boot0: mmc0:0001 DG4016 4.00 MiB > > x26: ffff00001333fc10 x25: 0000000000000001 x24: 0000000000000000 > > x23: ffff000013895400 x22: ffff8000821e3934 x21: ffff8000821e3934 > > x20: ffff0000134672c0 > > mmcblk0boot1: mmc0:0001 DG4016 4.00 MiB > > > > x19: 0000000000003010 x18: 0000000038868210 > > > > x17: 3038387830207570 x16: 63203d3d20303030 x15: 3030313038387830 > > x14: 205d315b67657220 > > mmcblk0rpmb: mmc0:0001 DG4016 4.00 MiB, chardev (237:0) > > > > x13: 6565727465636976 x12: 6564207369687420 > > > > x11: 726f662064656465 x10: 656e207265766520 x9 : 7420726f66206465 > > x8 : 6465656e20726576 x7 : 205d303033353938 x6 : ffff000013371280 > > x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff8000809bf028 > > x2 : ffff8000809bfb0c x1 : 0000000000003010 x0 : ffff8000821bd010 > > > > Call trace: > > regmap_mmio_read32le+0x1c/0x3c (P) > > regmap_mmio_read+0x40/0x68 > > _regmap_bus_reg_read+0x58/0x9c > > _regmap_read+0x70/0x1c4 > > _regmap_update_bits+0xe4/0x174 > > regmap_update_bits_base+0x60/0x90 > > imx95_pcie_core_reset+0x78/0xd0 > > imx_pcie_assert_core_reset+0x38/0x50 > > imx_pcie_host_init+0x68/0x4a0 > > dw_pcie_host_init+0x16c/0x500 > > imx_pcie_probe+0x2f4/0x71c > > platform_probe+0x64/0x100 > > really_probe+0xc8/0x3bc > > __driver_probe_device+0x84/0x16c > > driver_probe_device+0x40/0x160 > > __device_attach_driver+0xcc/0x1a0 > > bus_for_each_drv+0x88/0xe4 > > __device_attach_async_helper+0xac/0x108 > > async_run_entry_fn+0x30/0x144 > > process_one_work+0x14c/0x3e0 > > worker_thread+0x2f0/0x3fc > > kthread+0x128/0x1ec > > ret_from_fork+0x10/0x20 > > > > Code: aa0003f4 2a0103f3 f9400280 8b334000 (b9400000) > > ---[ end trace 0000000000000000 ]--- > > Is this series dependent on any other series/patches? Please update dts https://lore.kernel.org/imx/20250314060104.390065-1-hongxing.zhu@nxp.com/ arm64: dts: imx95: Correct the range of PCIe app-reg region Frank > > Best regards, > Alexander > -- > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany > Amtsgericht München, HRB 105018 > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider > http://www.tq-group.com/ > >
Am Mittwoch, 9. April 2025, 17:02:43 CEST schrieb Frank Li: > ******************** > Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen, dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter. > Attention external email: Open attachments and links only if you know that they are from a secure source and are safe. In doubt forward the email to the IT-Helpdesk to check it. > ******************** > > On Wed, Apr 09, 2025 at 11:51:53AM +0200, Alexander Stein wrote: > > Hi, > > > > Am Dienstag, 8. April 2025, 04:59:26 CEST schrieb Richard Zhu: > > > Add the cold reset toggle for i.MX95 PCIe to align PHY's power up sequency. > > > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > > Reviewed-by: Frank Li <Frank.Li@nxp.com> > > > --- > > > drivers/pci/controller/dwc/pci-imx6.c | 42 +++++++++++++++++++++++++++ > > > 1 file changed, 42 insertions(+) > > > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > > > index c5871c3d4194..7c60b712480a 100644 > > > --- a/drivers/pci/controller/dwc/pci-imx6.c > > > +++ b/drivers/pci/controller/dwc/pci-imx6.c > > > @@ -71,6 +71,9 @@ > > > #define IMX95_SID_MASK GENMASK(5, 0) > > > #define IMX95_MAX_LUT 32 > > > > > > +#define IMX95_PCIE_RST_CTRL 0x3010 > > > +#define IMX95_PCIE_COLD_RST BIT(0) > > > + > > > #define to_imx_pcie(x) dev_get_drvdata((x)->dev) > > > > > > enum imx_pcie_variants { > > > @@ -773,6 +776,43 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > > > return 0; > > > } > > > > > > +static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > > > +{ > > > + u32 val; > > > + > > > + if (assert) { > > > + /* > > > + * From i.MX95 PCIe PHY perspective, the COLD reset toggle > > > + * should be complete after power-up by the following sequence. > > > + * > 10us(at power-up) > > > + * > 10ns(warm reset) > > > + * |<------------>| > > > + * ______________ > > > + * phy_reset ____/ \________________ > > > + * ____________ > > > + * ref_clk_en_______________________/ > > > + * Toggle COLD reset aligned with this sequence for i.MX95 PCIe. > > > + */ > > > + regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > > + IMX95_PCIE_COLD_RST); > > > + /* > > > + * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the > > > + * hardware by doing a read. Otherwise, there is no guarantee > > > + * that the write has reached the hardware before udelay(). > > > + */ > > > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > > + &val); > > > + udelay(15); > > > + regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > > + IMX95_PCIE_COLD_RST); > > > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > > + &val); > > > + udelay(10); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) > > > { > > > reset_control_assert(imx_pcie->pciephy_reset); > > > @@ -1739,6 +1779,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > > > .ltssm_mask = IMX95_PCIE_LTSSM_EN, > > > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > > > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > > > + .core_reset = imx95_pcie_core_reset, > > > .init_phy = imx95_pcie_init_phy, > > > }, > > > [IMX8MQ_EP] = { > > > @@ -1792,6 +1833,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > > > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > > > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > > > .init_phy = imx95_pcie_init_phy, > > > + .core_reset = imx95_pcie_core_reset, > > > .epc_features = &imx95_pcie_epc_features, > > > .mode = DW_PCIE_EP_TYPE, > > > }, > > > > > > > This change introduces an invalid memory access on my platform. There is not > > even a PCIe device attached to it. > > > > > imx6q-pcie 4c380000.pcie: host bridge /soc/pcie@4c380000 ranges: > > > imx6q-pcie 4c300000.pcie: host bridge /soc/pcie@4c300000 ranges: > > > imx6q-pcie 4c380000.pcie: IO 0x088ff00000..0x088fffffff -> 0x0000000000 > > > imx6q-pcie 4c300000.pcie: IO 0x006ff00000..0x006fffffff -> 0x0000000000 > > > imx6q-pcie 4c380000.pcie: MEM 0x0a10000000..0x0a1fffffff -> 0x0010000000 > > > imx6q-pcie 4c300000.pcie: MEM 0x0910000000..0x091fffffff -> 0x0010000000 > > > imx6q-pcie 4c380000.pcie: config reg[1] 0x880100000 == cpu 0x880100000 > > > ; no fixup was ever needed for this devicetree > > > imx6q-pcie 4c300000.pcie: config reg[1] 0x60100000 == cpu 0x60100000 > > > ; no fixup was ever needed for this devicetree > > > Unable to handle kernel paging request at virtual address ffff800081dc5010 > > > Unable to handle kernel paging request at virtual address ffff8000821bd010 > > > Mem abort info: > > > > > > Mem abort info: > > > ESR = 0x0000000096000007 > > > ESR = 0x0000000096000007 > > > EC = 0x25: DABT (current EL), IL = 32 bits > > > EC = 0x25: DABT (current EL), IL = 32 bits > > > > > > fsl_enetc_mdio 0003:01:00.0: enabling device (0000 -> 0002) > > > > > > SET = 0, FnV = 0 > > > SET = 0, FnV = 0 > > > EA = 0, S1PTW = 0 > > > EA = 0, S1PTW = 0 > > > FSC = 0x07: level 3 translation fault > > > FSC = 0x07: level 3 translation fault > > > > > > Data abort info: > > > > > > Data abort info: > > > ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 > > > ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 > > > CM = 0, WnR = 0, TnD = 0, TagAccess = 0 > > > CM = 0, WnR = 0, TnD = 0, TagAccess = 0 > > > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 > > > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 > > > > > > swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000091a47000 > > > swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000091a47000 > > > [ffff800081dc5010] pgd=1000000092002003 > > > [ffff8000821bd010] pgd=1000000092002003 > > > , p4d=1000000092002003 > > > , p4d=1000000092002003 > > > , pud=1000000092003003 > > > , pud=1000000092003003 > > > , pmd=1000000092008003 > > > , pmd=100000009299f403 > > > , pte=0000000000000000 > > > , pte=0000000000000000 > > > > > > > > > Internal error: Oops: 0000000096000007 [#1] SMP > > > Modules linked in: > > > CPU: 0 UID: 0 PID: 63 Comm: kworker/u24:4 Tainted: G T > > > 6.15.0-rc1-next-20250409+ #3009 PREEMPT > > > f6bd3cc6346487744ae55f6115e728ff2bc7088b Tainted: [T]=RANDSTRUCT > > > Hardware name: TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2 (DT) > > > Workqueue: async async_run_entry_fn > > > pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > > > pc : regmap_mmio_read32le+0x1c/0x3c > > > lr : regmap_mmio_read+0x40/0x68 > > > sp : ffff80008223b860 > > > x29: ffff80008223b860 x28: ffff00001000c800 x27: ffff8000818679c0 > > > x26: ffff000013340410 x25: 0000000000000001 x24: 0000000000000000 > > > x23: ffff000012f5e400 x22: ffff80008223b934 x21: ffff80008223b934 > > > x20: ffff000012fc4900 x19: 0000000000003010 x18: 00000000a7aa953f > > > x17: 3e2d206666666666 x16: 666631393078302e x15: 2e30303030303030 > > > x14: 3139307830204d45 x13: 3030303030303031 x12: 30307830203e2d20 > > > x11: 6666666666666631 x10: 393078302e2e3030 x9 : 4d2020202020203a > > > x8 : 656963702e303030 x7 : 205d313236353838 x6 : ffff0000134e0000 > > > x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff8000809bf028 > > > x2 : ffff8000809bfb0c x1 : 0000000000003010 x0 : ffff800081dc5010 > > > > > > Call trace: > > > regmap_mmio_read32le+0x1c/0x3c (P) > > > regmap_mmio_read+0x40/0x68 > > > _regmap_bus_reg_read+0x58/0x9c > > > _regmap_read+0x70/0x1c4 > > > _regmap_update_bits+0xe4/0x174 > > > regmap_update_bits_base+0x60/0x90 > > > imx95_pcie_core_reset+0x78/0xd0 > > > imx_pcie_assert_core_reset+0x38/0x50 > > > imx_pcie_host_init+0x68/0x4a0 > > > dw_pcie_host_init+0x16c/0x500 > > > imx_pcie_probe+0x2f4/0x71c > > > platform_probe+0x64/0x100 > > > really_probe+0xc8/0x3bc > > > __driver_probe_device+0x84/0x16c > > > driver_probe_device+0x40/0x160 > > > __device_attach_driver+0xcc/0x1a0 > > > bus_for_each_drv+0x88/0xe4 > > > __device_attach_async_helper+0xac/0x108 > > > async_run_entry_fn+0x30/0x144 > > > process_one_work+0x14c/0x3e0 > > > worker_thread+0x2f0/0x3fc > > > kthread+0x128/0x1ec > > > ret_from_fork+0x10/0x20 > > > > > > Code: aa0003f4 2a0103f3 f9400280 8b334000 (b9400000) > > > ---[ end trace 0000000000000000 ]--- > > > note: kworker/u24:4[63] exited with irqs disabled > > > Internal error: Oops: 0000000096000007 [#2] SMP > > > Modules linked in: > > > note: kworker/u24:4[63] exited with preempt_count 1 > > > > > > CPU: 4 UID: 0 PID: 52 Comm: kworker/u24:1 Tainted: G D T > > > 6.15.0-rc1-next-20250409+ #3009 PREEMPT > > > f6bd3cc6346487744ae55f6115e728ff2bc7088b Tainted: [D]=DIE, [T]=RANDSTRUCT > > > Hardware name: TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2 (DT) > > > Workqueue: async async_run_entry_fn > > > pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > > > pc : regmap_mmio_read32le+0x1c/0x3c > > > lr : regmap_mmio_read+0x40/0x68 > > > mmc0: new HS400 Enhanced strobe MMC card at address 0001 > > > sp : ffff8000821e3860 > > > mmcblk0: mmc0:0001 DG4016 14.7 GiB > > > x29: ffff8000821e3860 x28: ffff00001000c800 x27: ffff8000818679c0 > > > mmcblk0boot0: mmc0:0001 DG4016 4.00 MiB > > > x26: ffff00001333fc10 x25: 0000000000000001 x24: 0000000000000000 > > > x23: ffff000013895400 x22: ffff8000821e3934 x21: ffff8000821e3934 > > > x20: ffff0000134672c0 > > > mmcblk0boot1: mmc0:0001 DG4016 4.00 MiB > > > > > > x19: 0000000000003010 x18: 0000000038868210 > > > > > > x17: 3038387830207570 x16: 63203d3d20303030 x15: 3030313038387830 > > > x14: 205d315b67657220 > > > mmcblk0rpmb: mmc0:0001 DG4016 4.00 MiB, chardev (237:0) > > > > > > x13: 6565727465636976 x12: 6564207369687420 > > > > > > x11: 726f662064656465 x10: 656e207265766520 x9 : 7420726f66206465 > > > x8 : 6465656e20726576 x7 : 205d303033353938 x6 : ffff000013371280 > > > x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff8000809bf028 > > > x2 : ffff8000809bfb0c x1 : 0000000000003010 x0 : ffff8000821bd010 > > > > > > Call trace: > > > regmap_mmio_read32le+0x1c/0x3c (P) > > > regmap_mmio_read+0x40/0x68 > > > _regmap_bus_reg_read+0x58/0x9c > > > _regmap_read+0x70/0x1c4 > > > _regmap_update_bits+0xe4/0x174 > > > regmap_update_bits_base+0x60/0x90 > > > imx95_pcie_core_reset+0x78/0xd0 > > > imx_pcie_assert_core_reset+0x38/0x50 > > > imx_pcie_host_init+0x68/0x4a0 > > > dw_pcie_host_init+0x16c/0x500 > > > imx_pcie_probe+0x2f4/0x71c > > > platform_probe+0x64/0x100 > > > really_probe+0xc8/0x3bc > > > __driver_probe_device+0x84/0x16c > > > driver_probe_device+0x40/0x160 > > > __device_attach_driver+0xcc/0x1a0 > > > bus_for_each_drv+0x88/0xe4 > > > __device_attach_async_helper+0xac/0x108 > > > async_run_entry_fn+0x30/0x144 > > > process_one_work+0x14c/0x3e0 > > > worker_thread+0x2f0/0x3fc > > > kthread+0x128/0x1ec > > > ret_from_fork+0x10/0x20 > > > > > > Code: aa0003f4 2a0103f3 f9400280 8b334000 (b9400000) > > > ---[ end trace 0000000000000000 ]--- > > > > Is this series dependent on any other series/patches? > > Please update dts > > https://lore.kernel.org/imx/20250314060104.390065-1-hongxing.zhu@nxp.com/ > arm64: dts: imx95: Correct the range of PCIe app-reg region This should have been mentioned in the cover letter that there are some dependencies. Anyway, the series looks okay. Even though I have no documentation regarding the erratas. Best regards, Alexander
On Tue, Apr 08, 2025 at 10:59:26AM +0800, Richard Zhu wrote: > Add the cold reset toggle for i.MX95 PCIe to align PHY's power up sequency. Please avoid spelling mistakes in the commit messages. > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > Reviewed-by: Frank Li <Frank.Li@nxp.com> > --- > drivers/pci/controller/dwc/pci-imx6.c | 42 +++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index c5871c3d4194..7c60b712480a 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -71,6 +71,9 @@ > #define IMX95_SID_MASK GENMASK(5, 0) > #define IMX95_MAX_LUT 32 > > +#define IMX95_PCIE_RST_CTRL 0x3010 > +#define IMX95_PCIE_COLD_RST BIT(0) > + > #define to_imx_pcie(x) dev_get_drvdata((x)->dev) > > enum imx_pcie_variants { > @@ -773,6 +776,43 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > return 0; > } > > +static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > +{ > + u32 val; > + > + if (assert) { > + /* > + * From i.MX95 PCIe PHY perspective, the COLD reset toggle > + * should be complete after power-up by the following sequence. > + * > 10us(at power-up) > + * > 10ns(warm reset) > + * |<------------>| > + * ______________ > + * phy_reset ____/ \________________ > + * ____________ > + * ref_clk_en_______________________/ > + * Toggle COLD reset aligned with this sequence for i.MX95 PCIe. > + */ > + regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + IMX95_PCIE_COLD_RST); > + /* > + * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the > + * hardware by doing a read. Otherwise, there is no guarantee > + * that the write has reached the hardware before udelay(). > + */ > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + &val); > + udelay(15); > + regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + IMX95_PCIE_COLD_RST); > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > + &val); > + udelay(10); > + } > + > + return 0; > +} > + > static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) > { > reset_control_assert(imx_pcie->pciephy_reset); > @@ -1739,6 +1779,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .ltssm_mask = IMX95_PCIE_LTSSM_EN, > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > + .core_reset = imx95_pcie_core_reset, > .init_phy = imx95_pcie_init_phy, > }, > [IMX8MQ_EP] = { > @@ -1792,6 +1833,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > .init_phy = imx95_pcie_init_phy, > + .core_reset = imx95_pcie_core_reset, > .epc_features = &imx95_pcie_epc_features, > .mode = DW_PCIE_EP_TYPE, > }, > -- > 2.37.1 >
> -----Original Message----- > From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Sent: 2025年4月13日 23:18 > To: Hongxing Zhu <hongxing.zhu@nxp.com> > Cc: Frank Li <frank.li@nxp.com>; l.stach@pengutronix.de; > lpieralisi@kernel.org; kw@linux.com; robh@kernel.org; > bhelgaas@google.com; shawnguo@kernel.org; s.hauer@pengutronix.de; > kernel@pengutronix.de; festevam@gmail.com; linux-pci@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; imx@lists.linux.dev; > linux-kernel@vger.kernel.org > Subject: Re: [PATCH v5 3/7] PCI: imx6: Toggle the cold reset for i.MX95 PCIe > > On Tue, Apr 08, 2025 at 10:59:26AM +0800, Richard Zhu wrote: > > Add the cold reset toggle for i.MX95 PCIe to align PHY's power up sequency. > > Please avoid spelling mistakes in the commit messages. > Okay, would be replaced by the following one. Add a cold reset toggle for the i.MX95 PCIe to align the PHY's power-up sequence. > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > Reviewed-by: Manivannan Sadhasivam > <manivannan.sadhasivam@linaro.org> > Thanks. Best Regards Richard > - Mani > > > Reviewed-by: Frank Li <Frank.Li@nxp.com> > > --- > > drivers/pci/controller/dwc/pci-imx6.c | 42 > > +++++++++++++++++++++++++++ > > 1 file changed, 42 insertions(+) > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c > > b/drivers/pci/controller/dwc/pci-imx6.c > > index c5871c3d4194..7c60b712480a 100644 > > --- a/drivers/pci/controller/dwc/pci-imx6.c > > +++ b/drivers/pci/controller/dwc/pci-imx6.c > > @@ -71,6 +71,9 @@ > > #define IMX95_SID_MASK GENMASK(5, 0) > > #define IMX95_MAX_LUT 32 > > > > +#define IMX95_PCIE_RST_CTRL 0x3010 > > +#define IMX95_PCIE_COLD_RST BIT(0) > > + > > #define to_imx_pcie(x) dev_get_drvdata((x)->dev) > > > > enum imx_pcie_variants { > > @@ -773,6 +776,43 @@ static int imx7d_pcie_core_reset(struct imx_pcie > *imx_pcie, bool assert) > > return 0; > > } > > > > +static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool > > +assert) { > > + u32 val; > > + > > + if (assert) { > > + /* > > + * From i.MX95 PCIe PHY perspective, the COLD reset toggle > > + * should be complete after power-up by the following sequence. > > + * > 10us(at power-up) > > + * > 10ns(warm reset) > > + * |<------------>| > > + * ______________ > > + * phy_reset ____/ \________________ > > + * ____________ > > + * ref_clk_en_______________________/ > > + * Toggle COLD reset aligned with this sequence for i.MX95 PCIe. > > + */ > > + regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > + IMX95_PCIE_COLD_RST); > > + /* > > + * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the > > + * hardware by doing a read. Otherwise, there is no guarantee > > + * that the write has reached the hardware before udelay(). > > + */ > > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, > IMX95_PCIE_RST_CTRL, > > + &val); > > + udelay(15); > > + regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, > > + IMX95_PCIE_COLD_RST); > > + regmap_read_bypassed(imx_pcie->iomuxc_gpr, > IMX95_PCIE_RST_CTRL, > > + &val); > > + udelay(10); > > + } > > + > > + return 0; > > +} > > + > > static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) { > > reset_control_assert(imx_pcie->pciephy_reset); > > @@ -1739,6 +1779,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > > .ltssm_mask = IMX95_PCIE_LTSSM_EN, > > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > > + .core_reset = imx95_pcie_core_reset, > > .init_phy = imx95_pcie_init_phy, > > }, > > [IMX8MQ_EP] = { > > @@ -1792,6 +1833,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > > .mode_off[0] = IMX95_PE0_GEN_CTRL_1, > > .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, > > .init_phy = imx95_pcie_init_phy, > > + .core_reset = imx95_pcie_core_reset, > > .epc_features = &imx95_pcie_epc_features, > > .mode = DW_PCIE_EP_TYPE, > > }, > > -- > > 2.37.1 > > > > -- > மணிவண்ணன் சதாசிவம்
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index c5871c3d4194..7c60b712480a 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -71,6 +71,9 @@ #define IMX95_SID_MASK GENMASK(5, 0) #define IMX95_MAX_LUT 32 +#define IMX95_PCIE_RST_CTRL 0x3010 +#define IMX95_PCIE_COLD_RST BIT(0) + #define to_imx_pcie(x) dev_get_drvdata((x)->dev) enum imx_pcie_variants { @@ -773,6 +776,43 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) return 0; } +static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) +{ + u32 val; + + if (assert) { + /* + * From i.MX95 PCIe PHY perspective, the COLD reset toggle + * should be complete after power-up by the following sequence. + * > 10us(at power-up) + * > 10ns(warm reset) + * |<------------>| + * ______________ + * phy_reset ____/ \________________ + * ____________ + * ref_clk_en_______________________/ + * Toggle COLD reset aligned with this sequence for i.MX95 PCIe. + */ + regmap_set_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, + IMX95_PCIE_COLD_RST); + /* + * Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the + * hardware by doing a read. Otherwise, there is no guarantee + * that the write has reached the hardware before udelay(). + */ + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, + &val); + udelay(15); + regmap_clear_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, + IMX95_PCIE_COLD_RST); + regmap_read_bypassed(imx_pcie->iomuxc_gpr, IMX95_PCIE_RST_CTRL, + &val); + udelay(10); + } + + return 0; +} + static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) { reset_control_assert(imx_pcie->pciephy_reset); @@ -1739,6 +1779,7 @@ static const struct imx_pcie_drvdata drvdata[] = { .ltssm_mask = IMX95_PCIE_LTSSM_EN, .mode_off[0] = IMX95_PE0_GEN_CTRL_1, .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, + .core_reset = imx95_pcie_core_reset, .init_phy = imx95_pcie_init_phy, }, [IMX8MQ_EP] = { @@ -1792,6 +1833,7 @@ static const struct imx_pcie_drvdata drvdata[] = { .mode_off[0] = IMX95_PE0_GEN_CTRL_1, .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE, .init_phy = imx95_pcie_init_phy, + .core_reset = imx95_pcie_core_reset, .epc_features = &imx95_pcie_epc_features, .mode = DW_PCIE_EP_TYPE, },