diff mbox series

[v2,5/6] i2c: pasemi: Enable the unjam machine

Message ID 20250415-pasemi-fixes-v2-5-c543bf53151a@svenpeter.dev (mailing list archive)
State New
Headers show
Series Apple/PASemi i2c error recovery fixes | expand

Commit Message

Sven Peter April 15, 2025, 3:36 p.m. UTC 
From: Hector Martin <marcan@marcan.st>

The I2C bus can get stuck under some conditions (desync between
controller and device). The pasemi controllers include an unjam feature
that is enabled on reset, but was being disabled by the driver. Keep it
enabled by explicitly setting the UJM bit in the CTL register. This
should help recover the bus from certain conditions, which would
otherwise remain stuck forever.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
 drivers/i2c/busses/i2c-pasemi-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c
index 2f31f039bedfd7f78d6572fe925125b1a6d0724b..41db38d82fe62c73614b8fafe4cb73c7d1a24762 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.c
+++ b/drivers/i2c/busses/i2c-pasemi-core.c
@@ -78,7 +78,7 @@  static inline int reg_read(struct pasemi_smbus *smbus, int reg)
 
 static void pasemi_reset(struct pasemi_smbus *smbus)
 {
-	u32 val = (CTL_MTR | CTL_MRR | (smbus->clk_div & CTL_CLK_M));
+	u32 val = (CTL_MTR | CTL_MRR | CTL_UJM | (smbus->clk_div & CTL_CLK_M));
 
 	if (smbus->hw_rev >= 6)
 		val |= CTL_EN;