From patchwork Tue Apr 15 13:04:57 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dominik Haller X-Patchwork-Id: 14052241 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 82ED0C369AB for ; Tue, 15 Apr 2025 13:26:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=fbOq2K1ldkVj48OEf18YO+kDVJoyDBvhyBuEHKl3UN8=; b=Cv2O7+hP6cBKGVPFUbzJG4xA2R PXZh2pdwirC0wB+oFlly/RQDJSQhozp+Ri5aOYH9dPDvzNEVLWOjCiBdO7DYWbYIiZhaxgtQBCWvp BsI4Va7ERX/DRuN1I+/fRYwHnolpmCxoJJA/WlsRGa1uAYB2Hl3oAjf1oHHrLoeWm4IgO+TDEB9Pl cF9l/137ae6dy9cjFJH3wnqMiX8HIa9ZfiPVYZGpkjqLOGZ5XK3TGiS5UBQ+qaOGRIdhIrf9mX4J+ 4zy0CzErgmi80PBCfF5pOsHjSpalzuGz9Ne465HZoIYLiunlFXC+GBx0BIKYIkcyHd+NgL1574E6+ rSZXVCwQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1u4gJ3-00000005u4Y-1eNl; Tue, 15 Apr 2025 13:26:29 +0000 Received: from mail-vi1eur05on20724.outbound.protection.outlook.com ([2a01:111:f403:2613::724] helo=EUR05-VI1-obe.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1u4fyf-00000005qxX-2PoF for linux-arm-kernel@lists.infradead.org; Tue, 15 Apr 2025 13:05:28 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=MJoHBae1UwZtudbWyNdtjriXMS+0OiUF/f4t3nvymghI6uh7Ph1GvIJaZZED9G2CnrEdTZdCaj0Dm22NBRChNSTxOxXogBA99aBrgWDoGjfIlJnMKp+sZ9yPqj7zJr81iqyXOtwHfkSNDK7kmRwNzPBSw+hyC1rxqAIGJbfJHLKVwfqd0xbMR+jOXjYPmXoOqCmxwAbgiEvUpbVpckPE4jnV0xs0Fys0wqJKZ039x5kRb767cRj4lvC/gLLAJWuBG/7cKctagLB2FRlwFBJRJF/IWepb/SmqOYH92CGt44NlDEVW4Ske+V9qEJ+ji7mr/7qGzBYP3kBAc731cTNdvQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=fbOq2K1ldkVj48OEf18YO+kDVJoyDBvhyBuEHKl3UN8=; b=MnQCUZCZ8YF4T1/LV9hNtTuW9oIoV7JCtuGcXex/mH2eoFKbEs86H81Qu5mD1VtP0W3edgbbp/zWGXhp7/pHLRC1yTHnFxsM+VaYRR0OxGnyqLR+8YgDO0czACAKlcGDgMGkFctrGQXI1gat164Ym4FCeq9uw/7MsQhS4kqCJSkKXn92P0sY1rUV80EAnq3TKw2fUYCcpljq41oTIGCMnmCJD1aSvrY1Dr2TyL9FoJGGrbHoSroajl5hUOdMywoL8feQVynPivSUKAfHrvQav2+k1pUPE77Us6AAi2ikFksQTZPcSaE4hKByCPtWoN8vofvjCd89jnSvqms8deyYjg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=softfail (sender ip is 91.26.50.189) smtp.rcpttodomain=kernel.org smtp.mailfrom=phytec.de; dmarc=fail (p=quarantine sp=quarantine pct=100) action=quarantine header.from=phytec.de; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=phytec.de; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=fbOq2K1ldkVj48OEf18YO+kDVJoyDBvhyBuEHKl3UN8=; b=JgFzImIIv7dKom+Jgz3o0lzrVRNKT3Cl5Lp6XFOOWzRUi+TTnvf/w5cxXz5O37bRWb/sHLjvy5csGKaYa7osdoD6vNr3nnyC7V2FI9uttgU7x22kb+Ly8hAl7+tQz/oJcDkq2XHCG3wj+8SgKOT+Rt/4HQeA+1p/G6YsE8Au+m44voGel1H3yaKJZo7yKA19Hp3fy48woJ1VFpQNAzKLg/N69vqSgKgTUS4QusWTnb7p6+OcAiDQ5/XH4WceVTBPGJPV1Xne98w05OwMFWZTk8DZ8068EweH7yGlMN2Wrh2Zp1x9m43sUSPUwuDwqKZwODwdxlX1YEKVgc5ChfDb7Q== Received: from DU7P194CA0009.EURP194.PROD.OUTLOOK.COM (2603:10a6:10:553::8) by GV2P195MB1967.EURP195.PROD.OUTLOOK.COM (2603:10a6:150:ad::18) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.8632.29; Tue, 15 Apr 2025 13:05:12 +0000 Received: from DB1PEPF000509ED.eurprd03.prod.outlook.com (2603:10a6:10:553:cafe::2f) by DU7P194CA0009.outlook.office365.com (2603:10a6:10:553::8) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.20.8632.35 via Frontend Transport; Tue, 15 Apr 2025 13:05:12 +0000 X-MS-Exchange-Authentication-Results: spf=softfail (sender IP is 91.26.50.189) smtp.mailfrom=phytec.de; dkim=none (message not signed) header.d=none;dmarc=fail action=quarantine header.from=phytec.de; Received-SPF: SoftFail (protection.outlook.com: domain of transitioning phytec.de discourages use of 91.26.50.189 as permitted sender) Received: from Diagnostix.phytec.de (91.26.50.189) by DB1PEPF000509ED.mail.protection.outlook.com (10.167.242.71) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.8655.12 via Frontend Transport; Tue, 15 Apr 2025 13:05:12 +0000 Received: from Florix.phytec.de (172.25.0.13) by Diagnostix.phytec.de (172.25.0.14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.44; Tue, 15 Apr 2025 15:05:10 +0200 Received: from lws-haller.phytec.de (172.25.32.139) by Florix.phytec.de (172.25.0.13) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.44; Tue, 15 Apr 2025 15:05:09 +0200 From: Dominik Haller To: , , , , , , CC: , , Subject: [PATCH v2 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x Date: Tue, 15 Apr 2025 15:04:57 +0200 Message-ID: <20250415130458.33714-2-d.haller@phytec.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20250415130458.33714-1-d.haller@phytec.de> References: <20250415130458.33714-1-d.haller@phytec.de> MIME-Version: 1.0 X-Originating-IP: [172.25.32.139] X-ClientProxiedBy: Diagnostix.phytec.de (172.25.0.14) To Florix.phytec.de (172.25.0.13) X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: DB1PEPF000509ED:EE_|GV2P195MB1967:EE_ X-MS-Office365-Filtering-Correlation-Id: d6aad512-33db-4741-8cd2-08dd7c1e2894 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|36860700013|82310400026|1800799024|376014|13003099007; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:91.26.50.189;CTRY:DE;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:Diagnostix.phytec.de;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230040)(36860700013)(82310400026)(1800799024)(376014)(13003099007);DIR:OUT;SFP:1102; X-OriginatorOrg: phytec.de X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Apr 2025 13:05:12.7540 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: d6aad512-33db-4741-8cd2-08dd7c1e2894 X-MS-Exchange-CrossTenant-Id: e609157c-80e2-446d-9be3-9c99c2399d29 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=e609157c-80e2-446d-9be3-9c99c2399d29;Ip=[91.26.50.189];Helo=[Diagnostix.phytec.de] X-MS-Exchange-CrossTenant-AuthSource: DB1PEPF000509ED.eurprd03.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: GV2P195MB1967 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20250415_060525_815740_538B73E8 X-CRM114-Status: GOOD ( 16.44 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family. A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2]. Supported features: * Debug UART * 2x SPI NOR Flash * eMMC * 2x Ethernet * Micro SD card * I2C EEPROM * I2C RTC * 2x I2C GPIO Expander * LEDs * USB 5 Gbit/s * PCIe For more details see the product pages for the SoM and the development kit: [1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/ [2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/ Signed-off-by: Dominik Haller --- Notes: Bootlog: https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124 Link to v1: https://lore.kernel.org/linux-arm-kernel/20250411101004.13276-1-d.haller@phytec.de/ Changes in v2: - aliases reordered - stdout-path set to &main_uart8 - fixed coding style in serdes0 node - dropped whitespaces in commit message arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 578 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1173 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 03d4cecfc001..3f18ca4029c3 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file mode 100644 index 000000000000..b88aa8fe9a0f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts @@ -0,0 +1,578 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller + * + * https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/ + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "k3-am68-phycore-som.dtsi" + +#include "k3-serdes.h" + +/ { + compatible = "phytec,am68-phyboard-izar", "ti,j721s2"; + model = "PHYTEC phyBOARD-Izar-AM68x"; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart8; + serial3 = &main_uart1; + serial4 = &main_uart2; + mmc1 = &main_sdhci1; + ethernet0 = &cpsw_port1; + }; + + chosen { + stdout-path = &main_uart8; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver4: can-phy4 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + vcc_12v0: regulator-12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "VCC_IN"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + /* Output of TLV7158P */ + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* Output of SiC431 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_5v0>; + }; + + vcc_5v0: regulator-vcc-5v0 { + /* Output of LM5116 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_12v0>; + }; +}; + +&main_pmx0 { + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (V27) MCASP1_AXR1.I2C2_SCL */ + J721S2_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (W27) MCASP1_AXR2.I2C2_SDA */ + >; + }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */ + J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */ + >; + }; + + main_i2c5_pins_default: main-i2c5-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (Y24) MCAN15_TX.I2C5_SCL */ + J721S2_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (W23) MCAN14_RX.I2C5_SDA */ + >; + }; + + main_gpio0_ioexp_intr_pins_default: main-gpio0-ioexp-intr-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */ + >; + }; + + main_mcan1_pins_default: main-mcan1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c8, PIN_INPUT, 4) /* (AD28) EXT_REFCLK1.MCAN1_RX */ + J721S2_IOPAD(0x06c, PIN_OUTPUT, 0) /* (V26) MCAN1_TX */ + >; + }; + + main_mcan13_pins_default: main-mcan13-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ec, PIN_INPUT, 9) /* (AG25) TIMER_IO1.MCAN13_RX */ + J721S2_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AE28) MCAN13_TX */ + >; + }; + + main_mcan16_pins_default: main-mcan16-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ + J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ + J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ + J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */ + J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */ + J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */ + J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */ + J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */ + >; + bootph-all; + }; + + main_spi6_pins_default: main-spi6-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x030, PIN_INPUT, 8) /* (T26) GPIO0_12.SPI6_CLK */ + J721S2_IOPAD(0x080, PIN_INPUT, 8) /* (U26) MCASP0_AXR4.SPI6_CS2 */ + J721S2_IOPAD(0x0c4, PIN_OUTPUT, 8) /* (AB26) ECAP0_IN_APWM_OUT.SPI6_D0 */ + J721S2_IOPAD(0x074, PIN_INPUT, 8) /* (R28) MCAN2_TX.SPI6_D1 */ + J721S2_IOPAD(0x0dc, PIN_OUTPUT, 7) /* (AH26) SPI0_D1.GPIO0_55 */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x05c, PIN_INPUT, 11) /* (AA26) MCASP2_AXR0.UART1_CTSn */ + J721S2_IOPAD(0x060, PIN_OUTPUT, 11) /* (AC27) MCASP2_AXR1.UART1_RTSn */ + J721S2_IOPAD(0x054, PIN_INPUT, 11) /* (Y27) MCASP2_ACLKX.UART1_RXD */ + J721S2_IOPAD(0x058, PIN_OUTPUT, 11) /* (AA27) MCASP2_AFSX.UART1_TXD */ + >; + }; + + main_uart2_pins_default: main-uart2-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d8, PIN_INPUT, 11) /* (AG26) SPI0_D0.UART2_RXD */ + J721S2_IOPAD(0x068, PIN_OUTPUT, 11) /* (U28) MCAN0_RX.UART2_TXD */ + >; + }; + + main_uart8_pins_default: main-uart8-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ + J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ + >; + bootph-all; + }; +}; + +&wkup_pmx1 { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + >; + }; +}; + +&wkup_pmx2 { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J721S2_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + >; + }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + >; + }; + + mcu_spi0_pins_default: mcu-spi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x038, PIN_INPUT, 0) /* (B27) MCU_SPI0_CLK */ + J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B26) MCU_SPI0_CS0 */ + J721S2_WKUP_IOPAD(0x068, PIN_INPUT, 2) /* (C23) WKUP_GPIO0_4.MCU_SPI0_CS3 */ + J721S2_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (D24) MCU_SPI0_D0 */ + J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 0) /* (B25) MCU_SPI0_D1 */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + bootph-all; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + + phy0: ethernet-phy@0 { + reg = <0>; + ti,clk-output-sel = ; + ti,fifo-depth = ; + ti,min-output-impedance; + ti,rx-internal-delay = ; + }; +}; + +&i2c_som_rtc { + trickle-resistor-ohms = <3000>; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + status = "okay"; + + exp1: gpio@20 { + compatible = "nxp,pca9672"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HALF/nFULL_EN", "RS485/nRS232_EN", "MCU_ETH_nRESET", "", + "PCIe_nRESET", "USB2.0-Hub_nRESET", "USB3.0-Hub_nRESET", "PEB_AV_BL_EN"; + interrupt-parent = <&main_gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "RPI_GPIO4", "RPI_GPIO5", "RPI_GPIO6", "RPI_GPIO19", + "RPI_GPIO20", "RPI_GPIO21", "RPI_GPIO22", "RPI_GPIO23", + "RPI_GPIO24", "RPI_GPIO25", "RPI_GPIO26", "RPI_GPIO20", + "LVDS_BL_nEN", "LVDS_REG_nEN", "CSI_CAM0_nRESET", "CSI_CAM1_nRESET", + "CSI0_CTRL1", "CSI0_CTRL2", "CSI0_CTRL3", "CSI0_CTRL4", + "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", "CSI1_CTRL4"; + interrupt-parent = <&main_gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio0_ioexp_intr_pins_default>; + }; +}; + +/* CSI0 + RPI */ +&main_i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; +}; + +/* CSI1 + PCIe */ +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c5_pins_default>; +}; + +&main_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan13 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan13_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan16 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan16_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +/* SD-Card */ +&main_sdhci1 { + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&main_spi6 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi6_pins_default>; + cs-gpios = <&main_gpio0 55 GPIO_ACTIVE_LOW>; + ti,spi-num-cs = <1>; + ti,pindir-d0-out-d1-in; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + uart-has-rtscts; + status = "okay"; +}; + +&main_uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins_default>; + status = "okay"; +}; + +&main_uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; + /* Shared with TFA on this platform */ + power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>; + bootph-all; + status = "okay"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>; +}; + +&mcu_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c1_pins_default>; + status = "okay"; +}; + +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + +/* RPI-Header */ +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_spi0_pins_default>; +}; + +/* RPI-Header */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; + uart-has-rtscts; + status = "okay"; +}; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + }; +}; + +&pcie1_rc { + num-lanes = <1>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&serdes_ln_ctrl { + idle-states = , , + , ; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>; + cdns,phy-type = ; + }; + + serdes0_usb_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + resets = <&serdes_wiz0 2>; + cdns,phy-type = ; + }; +}; + +&tscadc0 { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + status = "okay"; + + adc { + ti,adc-channels = <3 4 5 6 7>; + }; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 1 */ +}; + +&wkup_i2c0 { + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + }; + + led-controller@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-1 { + label = "user-led1"; + type = ; + }; + + led-2 { + label = "user-led2"; + type = ; + }; + + led-3 { + label = "user-led3"; + type = ; + }; + }; +}; + +/* Shared with TIFS */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + uart-has-rtscts; + bootph-all; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file mode 100644 index 000000000000..f9fb0c78ccde --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller + * + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/ + */ + +/dts-v1/; + +#include +#include +#include "k3-j721s2.dtsi" + +/ { + compatible = "phytec,am68-phycore-som", "ti,j721s2"; + model = "PHYTEC phyCORE-AM68x"; + + aliases { + ethernet1 = &main_cpsw_port1; + mmc0 = &main_sdhci0; + rtc0 = &i2c_som_rtc; + }; + + memory@80000000 { + device_type = "memory"; + /* 4GB RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x20000000>; + linux,cma-default; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a8000000 { + reg = <0x00 0xa8000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; + }; + + vdd_sd_dv: regulator-sd { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "VDD_SD_DV"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpios = <&main_gpio0 1 GPIO_ACTIVE_HIGH>; + states = <3300000 0x0>, + <1800000 0x1>; + }; +}; + +&main_pmx0 { + main_cpsw_mdio_pins_default: main-cpsw-mdio-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */ + J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ + J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */ + J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */ + J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */ + J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */ + J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */ + J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */ + J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */ + J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */ + J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */ + J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */ + J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */ + J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x004, PIN_OUTPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */ + >; + }; +}; + +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + >; + bootph-all; + }; +}; + +&wkup_pmx1 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + >; + }; +}; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x098, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x09c, PIN_INPUT_PULLUP, 0) /* (H27) WKUP_I2C0_SDA */ + >; + bootph-all; + }; +}; + +&c71_0 { + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; + status = "okay"; +}; + +&c71_1 { + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; + status = "okay"; +}; + +&mailbox0_cluster0 { + interrupts = <436>; + status = "okay"; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + status = "okay"; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <428>; + status = "okay"; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <420>; + status = "okay"; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&main_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; + status = "okay"; +}; + +&main_cpsw_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw_mdio_pins_default>; + status = "okay"; + + phy1: ethernet-phy@0 { + reg = <0>; + ti,clk-output-sel = ; + ti,fifo-depth = ; + ti,min-output-impedance; + ti,rx-internal-delay = ; + }; +}; + +&main_cpsw_port1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + + temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +/* eMMC */ +&main_sdhci0 { + disable-wp; + non-removable; + ti,driver-strength-ohm = <50>; + bootph-all; + status = "okay"; +}; + +/* SD card */ +&main_sdhci1 { + vqmmc-supply = <&vdd_sd_dv>; + bootph-all; +}; + +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + bootph-all; + }; +}; + +&wkup_gpio0 { + status = "okay"; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu_avs: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck12-supply = <&vcc_3v3>; + buck3-supply = <&vcc_3v3>; + buck4-supply = <&vcc_3v3>; + buck5-supply = <&vcc_3v3>; + ldo1-supply = <&vcc_3v3>; + ldo2-supply = <&vcc_3v3>; + ldo3-supply = <&vcc_3v3>; + ldo4-supply = <&vcc_3v3>; + ti,primary-pmic; + + regulators { + bucka12: buck12 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "VDD_RAM_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "VDD_IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "VDD_MCU_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "VDD_MCUIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "VDD_MCUIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "VDDA_DLL_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "VDDA_MCU_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + bootph-all; + }; + + som_eeprom_opt: eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +};