diff mbox series

[6/7] arm64: dts: ti: k3-j722s-main: switch to 64-bit address space for PCIe0

Message ID 20250417120407.2646929-7-s-vadapalli@ti.com (mailing list archive)
State New
Headers show
Series AM64 and J7X DT: Enable PCIe 64-bit Address Space | expand

Commit Message

Siddharth Vadapalli April 17, 2025, 12:04 p.m. UTC 
The PCIe0 instance of PCIe in J722S SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space

The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 6850f50530f1..a3928fe63ae4 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -98,10 +98,11 @@  pcie0_rc: pcie@f102000 {
 		reg = <0x00 0x0f102000 0x00 0x1000>,
 		      <0x00 0x0f100000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x00001000>;
+		      <0x06 0x00000000 0x00 0x00001000>;
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
-			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x06 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x06 0x00101000 0x00 0x08000000>, /* 32-bit Non-Prefetchable MEM (128 MB) */
+			 <0x43000000 0x06 0x08101000 0x06 0x08101000 0x00 0xf7eff000>; /* 64-bit Prefetchable MEM (4 GB - (129 MB + 4 KB)) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;