@@ -1055,7 +1055,7 @@ pcie0_rc: pcie@2900000 {
reg = <0x00 0x02900000 0x00 0x1000>,
<0x00 0x02907000 0x00 0x400>,
<0x00 0x0d000000 0x00 0x00800000>,
- <0x00 0x10000000 0x00 0x00001000>;
+ <0x40 0x00000000 0x00 0x00001000>;
reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
interrupt-names = "link_state";
interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
@@ -1073,8 +1073,9 @@ pcie0_rc: pcie@2900000 {
device-id = <0xb012>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
dma-coherent;
- ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
- <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+ ranges = <0x01000000 0x00 0x00001000 0x40 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+ <0x02000000 0x00 0x00101000 0x40 0x00101000 0x00 0x08000000>, /* 32-bit Non-Prefetchable MEM (128 MB) */
+ <0x43000000 0x40 0x08101000 0x40 0x08101000 0x00 0xf7eff000>; /* 64-bit Prefetchable MEM (4 GB - (129 MB + 4 KB)) */
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
status = "disabled";
};
@@ -1084,7 +1085,7 @@ pcie1_rc: pcie@2910000 {
reg = <0x00 0x02910000 0x00 0x1000>,
<0x00 0x02917000 0x00 0x400>,
<0x00 0x0d800000 0x00 0x00800000>,
- <0x00 0x18000000 0x00 0x00001000>;
+ <0x41 0x00000000 0x00 0x00001000>;
reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
interrupt-names = "link_state";
interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
@@ -1102,8 +1103,9 @@ pcie1_rc: pcie@2910000 {
device-id = <0xb012>;
msi-map = <0x0 &gic_its 0x10000 0x10000>;
dma-coherent;
- ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
- <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>;
+ ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+ <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0x08000000>, /* 32-bit Non-Prefetchable MEM (128 MB) */
+ <0x43000000 0x41 0x08101000 0x41 0x08101000 0x00 0xf7eff000>; /* 64-bit Prefetchable MEM (4 GB - (129 MB + 4 KB)) */
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
status = "disabled";
};
The PCIe0 and PCIe1 instances of PCIe in J742S2 and J784S4 SoCs support: 1. 128 MB address region in the 32-bit address space 2. 4 GB address region in the 64-bit address space The default configuration is that of a 128 MB address region in the 32-bit address space. While this might be sufficient for most use-cases, it is insufficient for supporting use-cases which require larger address spaces. Therefore, switch to using the 64-bit address space with a 4 GB address region. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- .../boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)