diff mbox series

[v3,12/15] arm64: dts: freescale: imx93-phyboard-segin: Add USB support

Message ID 20250418063104.2202085-13-primoz.fiser@norik.com (mailing list archive)
State New
Headers show
Series Update PHYTEC i.MX93 DTS | expand

Commit Message

Primoz Fiser April 18, 2025, 6:31 a.m. UTC 
Add support for both USB controllers. Set first controller in OTG mode
(USB micro-AB connector X8) and the second one in host mode (USB type A
connector X7) by default.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v3:
- add Reviewed-by tag

 .../boot/dts/freescale/imx93-phyboard-segin.dts     | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index be9c0a436734..e4f959f665b2 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -80,6 +80,19 @@  &lpuart1 {
 	status = "okay";
 };
 
+/* USB  */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
 /* SD-Card */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";