diff mbox series

[v3,07/15] arm64: dts: freescale: imx93-phyboard-segin: Disable SD-card write-protect

Message ID 20250418063104.2202085-8-primoz.fiser@norik.com (mailing list archive)
State New
Headers show
Series Update PHYTEC i.MX93 DTS | expand

Commit Message

Primoz Fiser April 18, 2025, 6:30 a.m. UTC 
Add disable-wp flag (write-protect) to usdhc2 node (SD-card) to get rid
of the following kernel boot warning:

  host does not support reading read-only switch, assuming write-enable

Micro SD cards can't be physically write-protected like full-sized
cards anyways.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v3:
- add Reviewed-by tag

 arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index 902b523fc92c..3d5cd0561362 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -48,6 +48,7 @@  &usdhc2 {
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	bus-width = <4>;
 	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	no-mmc;
 	no-sdio;
 	vmmc-supply = <&reg_usdhc2_vmmc>;