diff mbox series

[v4,2/2] arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard

Message ID 20250420094823.954073-3-pbrobinson@gmail.com (mailing list archive)
State New
Headers show
Series Add support for WiFi/BT header on Pine64 A64 devices | expand

Commit Message

Peter Robinson April 20, 2025, 9:48 a.m. UTC 
This adds all the pin mappings on the WiFi/BT header on
the SOPINE Baseboard/A64-LTS. They're disabled by default
as the modules don't ship by default. This includes, where
they haven't been already, UART1 for BT and mmc1 for WiFi.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index be2347c8f267..231e652cab67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -103,6 +103,17 @@  ext_rgmii_phy: ethernet-phy@1 {
 	};
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@  &uart0 {
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 /* On Pi-2 connector */
 &uart2 {
 	pinctrl-names = "default";