diff mbox

[v3,5/9] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442

Message ID 2090961.9q1JGydjPM@phil (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stuebner May 11, 2014, 10:09 p.m. UTC
This driver can handle the clock controllers of the socs mentioned above,
as they share a common clock tree with only small differences.

The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure.

As pll-rate-tables only the 12mhz variants are currently included.
The original code was wrongly checking for 169mhz xti values [a 0 to much
at the end], so the original 16mhz pll table would have never been
included and its values are so obscure that I have no possibility to
at least check their sane-ness. When using the formula from the manual
the resulting frequency is near the table value but still slightly off.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
---
 drivers/clk/samsung/Makefile        |   1 +
 drivers/clk/samsung/clk-s3c2410.c   | 482 ++++++++++++++++++++++++++++++++++++
 include/dt-bindings/clock/s3c2410.h |  62 +++++
 3 files changed, 545 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-s3c2410.c
 create mode 100644 include/dt-bindings/clock/s3c2410.h
diff mbox

Patch

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 28ba4eb..9160494 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -9,6 +9,7 @@  obj-$(CONFIG_SOC_EXYNOS5260)	+= clk-exynos5260.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
 obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
new file mode 100644
index 0000000..ba07168
--- /dev/null
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -0,0 +1,482 @@ 
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2410 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2410.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME	0x00
+#define MPLLCON		0x04
+#define UPLLCON		0x08
+#define CLKCON		0x0c
+#define CLKSLOW		0x10
+#define CLKDIVN		0x14
+#define CAMDIVN		0x18
+
+/* the soc types */
+enum supported_socs {
+	S3C2410,
+	S3C2440,
+	S3C2442,
+};
+
+/* list of PLLs to be registered */
+enum s3c2410_plls {
+	mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2410_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2410_clk_regs[] __initdata = {
+	LOCKTIME,
+	MPLLCON,
+	UPLLCON,
+	CLKCON,
+	CLKSLOW,
+	CLKDIVN,
+	CAMDIVN,
+};
+
+static int s3c2410_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+
+	return 0;
+}
+
+static void s3c2410_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+}
+
+static struct syscore_ops s3c2410_clk_syscore_ops = {
+	.suspend = s3c2410_clk_suspend,
+	.resume = s3c2410_clk_resume,
+};
+
+static void s3c2410_clk_sleep_init(void)
+{
+	s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs,
+						ARRAY_SIZE(s3c2410_clk_regs));
+	if (!s3c2410_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2410_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2410_clk_sleep_init(void) {}
+#endif
+
+PNAME(fclk_p) = { "mpll", "div_slow" };
+
+struct samsung_mux_clock s3c2410_common_muxes[] __initdata = {
+	MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1),
+};
+
+static struct clk_div_table divslow_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2410_common_dividers[] __initdata = {
+	DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1),
+};
+
+struct samsung_gate_clock s3c2410_common_gates[] __initdata = {
+	GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0),
+	GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0),
+	GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+	GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+};
+
+/* should be added _after_ the soc-specific clocks are created */
+struct samsung_clock_alias s3c2410_common_aliases[] __initdata = {
+	ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(UCLK, NULL, "usb-bus-host"),
+	ALIAS(UCLK, NULL, "usb-bus-gadget"),
+	ALIAS(ARMCLK, NULL, "armclk"),
+	ALIAS(UCLK, NULL, "uclk"),
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(MPLL, NULL, "mpll"),
+	ALIAS(FCLK, NULL, "fclk"),
+};
+
+/* S3C2410 specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	/* 2410A extras */
+	PLL_35XX_RATE(270000000, 127, 1, 1),
+	PLL_35XX_RATE(268000000, 126, 1, 1),
+	PLL_35XX_RATE(266000000, 125, 1, 1),
+	PLL_35XX_RATE(226000000, 105, 1, 1),
+	PLL_35XX_RATE(210000000, 132, 2, 1),
+	/* 2410 common */
+	PLL_35XX_RATE(203000000, 161, 3, 1),
+	PLL_35XX_RATE(192000000, 88, 1, 1),
+	PLL_35XX_RATE(186000000, 85, 1, 1),
+	PLL_35XX_RATE(180000000, 82, 1, 1),
+	PLL_35XX_RATE(170000000, 77, 1, 1),
+	PLL_35XX_RATE(158000000, 71, 1, 1),
+	PLL_35XX_RATE(152000000, 68, 1, 1),
+	PLL_35XX_RATE(147000000, 90, 2, 1),
+	PLL_35XX_RATE(135000000, 82, 2, 1),
+	PLL_35XX_RATE(124000000, 116, 1, 2),
+	PLL_35XX_RATE(118000000, 150, 2, 2),
+	PLL_35XX_RATE(113000000, 105, 1, 2),
+	PLL_35XX_RATE(101000000, 127, 2, 2),
+	PLL_35XX_RATE(90000000, 112, 2, 2),
+	PLL_35XX_RATE(85000000, 105, 2, 2),
+	PLL_35XX_RATE(79000000, 71, 1, 2),
+	PLL_35XX_RATE(68000000, 82, 2, 2),
+	PLL_35XX_RATE(56000000, 142, 2, 3),
+	PLL_35XX_RATE(48000000, 120, 2, 3),
+	PLL_35XX_RATE(51000000, 161, 3, 3),
+	PLL_35XX_RATE(45000000, 82, 1, 3),
+	PLL_35XX_RATE(34000000, 82, 2, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c2410_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_div_clock s3c2410_dividers[] __initdata = {
+	DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1),
+};
+
+struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = {
+	/*
+	 * armclk is directly supplied by the fclk, without
+	 * switching possibility like on the s3c244x below.
+	 */
+	FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0),
+
+	/* uclk is fed from the unmodified upll */
+	FFACTOR(UCLK, "uclk", "upll", 1, 1, 0),
+};
+
+struct samsung_clock_alias s3c2410_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"),
+	ALIAS(UCLK, NULL, "clk_uart_baud1"),
+};
+
+/* S3C244x specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	PLL_35XX_RATE(400000000, 0x5c, 1, 1),
+	PLL_35XX_RATE(390000000, 0x7a, 2, 1),
+	PLL_35XX_RATE(380000000, 0x57, 1, 1),
+	PLL_35XX_RATE(370000000, 0xb1, 4, 1),
+	PLL_35XX_RATE(360000000, 0x70, 2, 1),
+	PLL_35XX_RATE(350000000, 0xa7, 4, 1),
+	PLL_35XX_RATE(340000000, 0x4d, 1, 1),
+	PLL_35XX_RATE(330000000, 0x66, 2, 1),
+	PLL_35XX_RATE(320000000, 0x98, 4, 1),
+	PLL_35XX_RATE(310000000, 0x93, 4, 1),
+	PLL_35XX_RATE(300000000, 0x75, 3, 1),
+	PLL_35XX_RATE(240000000, 0x70, 1, 2),
+	PLL_35XX_RATE(230000000, 0x6b, 1, 2),
+	PLL_35XX_RATE(220000000, 0x66, 1, 2),
+	PLL_35XX_RATE(210000000, 0x84, 2, 2),
+	PLL_35XX_RATE(200000000, 0x5c, 1, 2),
+	PLL_35XX_RATE(190000000, 0x57, 1, 2),
+	PLL_35XX_RATE(180000000, 0x70, 2, 2),
+	PLL_35XX_RATE(170000000, 0x4d, 1, 2),
+	PLL_35XX_RATE(160000000, 0x98, 4, 2),
+	PLL_35XX_RATE(150000000, 0x75, 3, 2),
+	PLL_35XX_RATE(120000000, 0x70, 1, 3),
+	PLL_35XX_RATE(110000000, 0x66, 1, 3),
+	PLL_35XX_RATE(100000000, 0x5c, 1, 3),
+	PLL_35XX_RATE(90000000, 0x70, 2, 3),
+	PLL_35XX_RATE(80000000, 0x98, 4, 3),
+	PLL_35XX_RATE(75000000, 0x75, 3, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c244x_common_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" };
+PNAME(armclk_p) = { "fclk", "hclk" };
+
+struct samsung_mux_clock s3c244x_common_muxes[] __initdata = {
+	MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2),
+	MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1),
+};
+
+struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = {
+	FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0),
+	FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+static struct clk_div_table div_hclk_4_d[] = {
+	{ .val = 0, .div = 4 },
+	{ .val = 1, .div = 8 },
+	{ /* sentinel */ },
+};
+
+static struct clk_div_table div_hclk_3_d[] = {
+	{ .val = 0, .div = 3 },
+	{ .val = 1, .div = 6 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c244x_common_dividers[] __initdata = {
+	DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1),
+	DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1),
+	DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d),
+	DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d),
+	DIV(0, "div_cam", "upll", CAMDIVN, 0, 3),
+};
+
+struct samsung_gate_clock s3c244x_common_gates[] __initdata = {
+	GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c244x_common_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(HCLK_CAM, NULL, "camif"),
+	ALIAS(CAMIF, NULL, "camif-upll"),
+};
+
+/* S3C2440 specific clocks */
+
+PNAME(s3c2440_camif_p) = { "upll", "ff_cam" };
+
+struct samsung_mux_clock s3c2440_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1),
+};
+
+struct samsung_gate_clock s3c2440_gates[] __initdata = {
+	GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0),
+};
+
+/* S3C2442 specific clocks */
+
+struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = {
+	FFACTOR(0, "upll_3", "upll", 1, 3, 0),
+};
+
+PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" };
+
+struct samsung_mux_clock s3c2442_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI	1
+struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
+	FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2410_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx,
+		unsigned long xti_f)
+{
+	struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+	s3c2410_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks,
+				ARRAY_SIZE(s3c2410_common_frate_clks));
+
+	samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
+
+	if (current_soc == 2410) {
+		if (_get_rate("xti") == 12 * MHZ) {
+			s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
+			s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c2410_plls,
+				ARRAY_SIZE(s3c2410_plls), reg_base);
+
+	} else { /* S3C2440, S3C2442 */
+		if (_get_rate("xti") == 12 * MHZ) {
+			/*
+			 * plls follow different calculation schemes, with the
+			 * upll following the same scheme as the s3c2410 plls
+			 */
+			s3c244x_common_plls[mpll].rate_table =
+							pll_s3c244x_12mhz_tbl;
+			s3c244x_common_plls[upll].rate_table =
+							pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c244x_common_plls,
+				ARRAY_SIZE(s3c244x_common_plls), reg_base);
+	}
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2410_common_muxes,
+			ARRAY_SIZE(s3c2410_common_muxes));
+	samsung_clk_register_div(ctx, s3c2410_common_dividers,
+			ARRAY_SIZE(s3c2410_common_dividers));
+	samsung_clk_register_gate(ctx, s3c2410_common_gates,
+		ARRAY_SIZE(s3c2410_common_gates));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_div(ctx, s3c244x_common_dividers,
+				ARRAY_SIZE(s3c244x_common_dividers));
+		samsung_clk_register_gate(ctx, s3c244x_common_gates,
+				ARRAY_SIZE(s3c244x_common_gates));
+		samsung_clk_register_mux(ctx, s3c244x_common_muxes,
+				ARRAY_SIZE(s3c244x_common_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor,
+				ARRAY_SIZE(s3c244x_common_ffactor));
+	}
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2410:
+		samsung_clk_register_div(ctx, s3c2410_dividers,
+				ARRAY_SIZE(s3c2410_dividers));
+		samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
+				ARRAY_SIZE(s3c2410_ffactor));
+		samsung_clk_register_alias(ctx, s3c2410_aliases,
+			ARRAY_SIZE(s3c2410_common_aliases));
+		break;
+	case S3C2440:
+		samsung_clk_register_mux(ctx, s3c2440_muxes,
+				ARRAY_SIZE(s3c2440_muxes));
+		samsung_clk_register_gate(ctx, s3c2440_gates,
+				ARRAY_SIZE(s3c2440_gates));
+		break;
+	case S3C2442:
+		samsung_clk_register_mux(ctx, s3c2442_muxes,
+				ARRAY_SIZE(s3c2442_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor,
+				ARRAY_SIZE(s3c2442_ffactor));
+		break;
+	}
+
+	/*
+	 * Register common aliases at the end, as some of the aliased clocks
+	 * are SoC specific.
+	 */
+	samsung_clk_register_alias(ctx, s3c2410_common_aliases,
+		ARRAY_SIZE(s3c2410_common_aliases));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_alias(ctx, s3c244x_common_aliases,
+			ARRAY_SIZE(s3c244x_common_aliases));
+	}
+
+	s3c2410_clk_sleep_init();
+}
+
+static void __init s3c2410_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2410, 0);
+}
+CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init);
+
+static void __init s3c2440_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2440, 0);
+}
+CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init);
+
+static void __init s3c2442_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2442, 0);
+}
+CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init);
diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h
new file mode 100644
index 0000000..352a767
--- /dev/null
+++ b/include/dt-bindings/clock/s3c2410.h
@@ -0,0 +1,62 @@ 
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2410 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL			2
+#define UPLL			3
+#define FCLK			4
+#define HCLK			5
+#define PCLK			6
+#define UCLK			7
+#define ARMCLK			8
+
+/* pclk-gates */
+#define PCLK_UART0		16
+#define PCLK_UART1		17
+#define PCLK_UART2		18
+#define PCLK_I2C		19
+#define PCLK_SDI		20
+#define PCLK_SPI		21
+#define PCLK_ADC		22
+#define PCLK_AC97		23
+#define PCLK_I2S		24
+#define PCLK_PWM		25
+#define PCLK_RTC		26
+#define PCLK_GPIO		27
+
+
+/* hclk-gates */
+#define HCLK_LCD		32
+#define HCLK_USBH		33
+#define HCLK_USBD		34
+#define HCLK_NAND		35
+#define HCLK_CAM		36
+
+
+#define CAMIF			40
+
+
+/* Total number of clocks. */
+#define NR_CLKS			(CAMIF + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */