@@ -24,7 +24,6 @@
#define PERIOD_MIN 0x2
struct bcm2835_pwm {
- struct pwm_chip chip;
struct device *dev;
void __iomem *base;
struct clk *clk;
@@ -32,7 +31,7 @@ struct bcm2835_pwm {
static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
{
- return container_of(chip, struct bcm2835_pwm, chip);
+ return pwmchip_get_drvdata(chip);
}
static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -133,12 +132,14 @@ static const struct pwm_ops bcm2835_pwm_ops = {
static int bcm2835_pwm_probe(struct platform_device *pdev)
{
+ struct pwm_chip *chip;
struct bcm2835_pwm *pc;
int ret;
- pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
- if (!pc)
- return -ENOMEM;
+ chip = devm_pwmchip_alloc(&pdev->dev, 2, sizeof(*pc));
+ if (IS_ERR(chip))
+ return PTR_ERR(chip);
+ pc = to_bcm2835_pwm(chip);
pc->dev = &pdev->dev;
@@ -151,13 +152,11 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
"clock not found\n");
- pc->chip.dev = &pdev->dev;
- pc->chip.ops = &bcm2835_pwm_ops;
- pc->chip.npwm = 2;
+ chip->ops = &bcm2835_pwm_ops;
platform_set_drvdata(pdev, pc);
- ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
+ ret = devm_pwmchip_add(&pdev->dev, chip);
if (ret < 0)
return dev_err_probe(&pdev->dev, ret,
"failed to add pwmchip\n");
This prepares the pwm-bcm2835 driver to further changes of the pwm core outlined in the commit introducing devm_pwmchip_alloc(). There is no intended semantical change and the driver should behave as before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/pwm/pwm-bcm2835.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)