diff mbox series

[v2] arm64: dts: rockchip: Add SDR104 mode to SD-card I/F on rk3399-roc-pc

Message ID 25466090-3b24-2695-10fb-88c59be3f149@fivetechno.de (mailing list archive)
State New, archived
Headers show
Series [v2] arm64: dts: rockchip: Add SDR104 mode to SD-card I/F on rk3399-roc-pc | expand

Commit Message

Markus Reichl Nov. 12, 2019, 8:45 a.m. UTC
Add SDR104 capability and regulators to SD card node.
While at it, fix a typo in lcd pinctrl and remove two
undocumented bindings from pmic.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
---
v2: Remove always-on from vcc3v0_sd
---
 .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 30 +++++++++++++++----
 1 file changed, 24 insertions(+), 6 deletions(-)

Comments

Ulf Hansson Nov. 12, 2019, 8:59 a.m. UTC | #1
On Tue, 12 Nov 2019 at 09:45, Markus Reichl <m.reichl@fivetechno.de> wrote:
>
> Add SDR104 capability and regulators to SD card node.
> While at it, fix a typo in lcd pinctrl and remove two
> undocumented bindings from pmic.
>
> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>

FWIW:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
> v2: Remove always-on from vcc3v0_sd
> ---
>  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 30 +++++++++++++++----
>  1 file changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> index d1eb55c855b3..a31099f7620b 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> @@ -135,6 +135,19 @@
>                 vin-supply = <&vcc_1v8>;
>         };
>
> +       vcc3v0_sd: vcc3v0-sd {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&vcc3v0_sd_en>;
> +               regulator-name = "vcc3v0_sd";
> +               regulator-boot-on;
> +               regulator-min-microvolt = <3000000>;
> +               regulator-max-microvolt = <3000000>;
> +               vin-supply = <&vcc3v3_sys>;
> +       };
> +
>         vcc3v3_sys: vcc3v3-sys {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vcc3v3_sys";
> @@ -293,8 +306,6 @@
>                 vcc10-supply = <&vcc3v3_sys>;
>                 vcc11-supply = <&vcc3v3_sys>;
>                 vcc12-supply = <&vcc3v3_sys>;
> -               vcc13-supply = <&vcc3v3_sys>;
> -               vcc14-supply = <&vcc3v3_sys>;
>                 vddio-supply = <&vcc_3v0>;
>
>                 regulators {
> @@ -576,7 +587,7 @@
>
>         lcd-panel {
>                 lcd_panel_reset: lcd-panel-reset {
> -                       rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
> +                       rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
> @@ -602,6 +613,10 @@
>                 vsel2_gpio: vsel2-gpio {
>                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
> +
> +               pmic_int_l: pmic-int-l {
> +                       rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> +               };
>         };
>
>         sdio-pwrseq {
> @@ -610,9 +625,9 @@
>                 };
>         };
>
> -       pmic {
> -               pmic_int_l: pmic-int-l {
> -                       rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> +       sdmmc {
> +               vcc3v0_sd_en: vcc3v0-sd-en {
> +                       rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
>
> @@ -667,6 +682,9 @@
>         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
>         disable-wp;
>         max-frequency = <150000000>;
> +       sd-uhs-sdr104;
> +       vmmc-supply = <&vcc3v0_sd>;
> +       vqmmc-supply = <&vcc_sdio>;
>         pinctrl-names = "default";
>         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
>         status = "okay";
> --
> 2.20.1
>
Heiko Stübner Nov. 14, 2019, 1:25 p.m. UTC | #2
Hi Markus,

Am Dienstag, 12. November 2019, 09:45:36 CET schrieb Markus Reichl:
> Add SDR104 capability and regulators to SD card node.

> While at it, fix a typo in lcd pinctrl and remove two
> undocumented bindings from pmic.

A commit message like this always is a good indicator that this wants to
be multiple patches ;-) [Keywords: "While at it", "And", ...]


> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
> ---
> v2: Remove always-on from vcc3v0_sd
> ---
>  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 30 +++++++++++++++----
>  1 file changed, 24 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> index d1eb55c855b3..a31099f7620b 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> @@ -135,6 +135,19 @@
>  		vin-supply = <&vcc_1v8>;
>  	};
>  
> +	vcc3v0_sd: vcc3v0-sd {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc3v0_sd_en>;
> +		regulator-name = "vcc3v0_sd";
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3000000>;
> +		regulator-max-microvolt = <3000000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +
>  	vcc3v3_sys: vcc3v3-sys {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc3v3_sys";
> @@ -293,8 +306,6 @@
>  		vcc10-supply = <&vcc3v3_sys>;
>  		vcc11-supply = <&vcc3v3_sys>;
>  		vcc12-supply = <&vcc3v3_sys>;
> -		vcc13-supply = <&vcc3v3_sys>;
> -		vcc14-supply = <&vcc3v3_sys>;

Separate patch with nice description perhaps? (remove undocumented inputs)


>  		vddio-supply = <&vcc_3v0>;
>  
>  		regulators {
> @@ -576,7 +587,7 @@
>  
>  	lcd-panel {
>  		lcd_panel_reset: lcd-panel-reset {
> -			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
> +			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;

Separate patch please, "use correct pin for lcd-reset pinctrl" or so.

>  		};
>  	};
>  
> @@ -602,6 +613,10 @@
>  		vsel2_gpio: vsel2-gpio {
>  			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>  		};
> +
> +		pmic_int_l: pmic-int-l {
> +			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
>  	};
>  
>  	sdio-pwrseq {
> @@ -610,9 +625,9 @@
>  		};
>  	};
>  
> -	pmic {
> -		pmic_int_l: pmic-int-l {
> -			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;

separate patch please talking about regrouping the two
separate pmic pin-groups.


> +	sdmmc {
> +		vcc3v0_sd_en: vcc3v0-sd-en {
> +			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  	};
>  
> @@ -667,6 +682,9 @@
>  	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
>  	disable-wp;
>  	max-frequency = <150000000>;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc3v0_sd>;
> +	vqmmc-supply = <&vcc_sdio>;

Alphabetical sorting of new properties please
(status staying at the bottom though)

>  	pinctrl-names = "default";
>  	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
>  	status = "okay";
> 

Thanks
Heiko
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index d1eb55c855b3..a31099f7620b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -135,6 +135,19 @@ 
 		vin-supply = <&vcc_1v8>;
 	};
 
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -293,8 +306,6 @@ 
 		vcc10-supply = <&vcc3v3_sys>;
 		vcc11-supply = <&vcc3v3_sys>;
 		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc3v3_sys>;
-		vcc14-supply = <&vcc3v3_sys>;
 		vddio-supply = <&vcc_3v0>;
 
 		regulators {
@@ -576,7 +587,7 @@ 
 
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -602,6 +613,10 @@ 
 		vsel2_gpio: vsel2-gpio {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
 	};
 
 	sdio-pwrseq {
@@ -610,9 +625,9 @@ 
 		};
 	};
 
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -667,6 +682,9 @@ 
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 	status = "okay";