[11/29] ARM: shmobile: henninger: remove board DT

Commit Message

Simon Horman Nov. 20, 2015, 1:05 a.m. UTC

From: Sergei Shtylyov <[e-mail]>

The Henninger low cost board was never sold and so  had  no  users outside
Renesas (and Cogent Embedded). Instead Renesas  has made the Porter  board
which has mostly similar hardware. Now that the Porter board support is on
par with Henninger, we can remove  the Henninger's device tree file.

Signed-off-by: Sergei Shtylyov <[e-mail]>
Signed-off-by: Simon Horman <[e-mail]>
---
 arch/arm/boot/dts/Makefile              |   1 -
 arch/arm/boot/dts/r8a7791-henninger.dts | 320 --------------------------------
 2 files changed, 321 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7791-henninger.dts

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d285d9816d9d..d3de3a447d72 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -530,7 +530,6 @@  dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7778-bockw.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \
-	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
 	r8a7793-gose.dtb \
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
deleted file mode 100644
index 655d1804e5e9..000000000000
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ /dev/null
@@ -1,320 +0,0 @@ 
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Henninger";
-	compatible = "renesas,henninger", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-
-	vin0_pins: vin0 {
-		renesas,groups = "vin0_data8", "vin0_clk";
-		renesas,function = "vin0";
-	};
-
-	can0_pins: can0 {
-		renesas,groups = "can0_data";
-		renesas,function = "can0";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	composite-in@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-		remote = <&vin0>;
-
-		port {
-			adv7180: endpoint {
-				bus-width = <8>;
-				remote-endpoint = <&vin0ep>;
-			};
-		};
-	};
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader_prg";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user_prg";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash_fs";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};