| Message ID | 3697b726f12df89d6fc222b64672f8fc3779ec3c.1578578535.git.michal.simek@xilinx.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 526a63f00f109796832062c69eeed14fa03d0fcd |
| Headers | show |
| Series | arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels | expand |
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index a109e82982ae..d60110ad8367 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -103,6 +103,11 @@ sdio_pwrseq: sdio-pwrseq { reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ post-power-on-delay-ms = <10>; }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; + }; }; &dcc { @@ -191,8 +196,9 @@ i2csw_5: i2c@5 { #size-cells = <0>; reg = <5>; /* PS_PMBUS */ - ina226@40 { /* u35 */ + u35: ina226@40 { /* u35 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; reg = <0x40>; shunt-resistor = <10000>; /* MIO31 is alert which should be routed to PMUFW */
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)