diff mbox series

[v1,10/49] ARM: dts: imx6q-bosch-acc: Use #pwm-cells = <3> for imx27-pwm device

Message ID 3cdc316fba84588bd11ebb5cd565f582edafc323.1712352665.git.u.kleine-koenig@pengutronix.de (mailing list archive)
State New
Headers show
Series ARM: dts: imx: Use #pwm-cells = <3> for imx27-pwm device | expand

Commit Message

Uwe Kleine-König April 5, 2024, 9:41 p.m. UTC 
The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
index 02648806c275..d3f14b4d3b51 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
@@ -36,7 +36,7 @@  memory@10000000 {
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 200000>;
+		pwms = <&pwm1 0 200000 0>;
 		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
 		num-interpolated-steps = <10>;
 		default-brightness-level = <60>;
@@ -117,14 +117,14 @@  led_red: led-0 {
 			color = <LED_COLOR_ID_RED>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm2 0 500000>;
+			pwms = <&pwm2 0 500000 0>;
 		};
 
 		led_white: led-1 {
 			color = <LED_COLOR_ID_WHITE>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm3 0 500000>;
+			pwms = <&pwm3 0 500000 0>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -484,28 +484,24 @@  lvds0_out: endpoint {
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";