[GIT,PULL,1/2] arm64: dts: ti: K3 devicetree updates for v6.13

Hi ARM SoC Maintainers, The following changes since commit 9852d85ec9d492ebef56dc5f229416c925758edc: Linux 6.12-rc1 (2024-09-29 15:06:19 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.13 for you to fetch changes up to 767b6a0d0900c951e8b42306bd636268481a97ae: arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon (2024-11-04 18:56:35 +0530) ---------------------------------------------------------------- TI K3 device tree updates for v6.13 Generic Fixups/Cleanups: - Cleanup bootph-* tags to limit to leaf nodes only - clock IDs for MCSPI instances fixed up across J7xx family - Misc indentation and whitespace cleanup across dts New SoC - J742s2 which is a cutdown of existing J784s4 and uses same EVM SoC Specific features and Fixes: - eQEP (counter) support across AM64/AM62/AM62A AM64 - M4F Remoteproc support - stats collection support for ICSSGs via ti,pa-stats - Add PCIe EP overlays AM65 - stats collection support for ICSSGs via ti,pa-stats AM62: - M4F Remoteproc support - eMMC/SD TAP value updates - dtbs_check fixes for opp_efuse_table AM62A - 1.4GHz opp entry AM62P - 1.4GHz opp entry J7200 - Add PCIe EP overlays - Pinmux node reg range fixes Board Specific AM62 - am62 verdin ivy carrier board support - am625-verdin TPM device support - am62 verdin ivy board support - Beagleplay Mikrobus PWM header support - am62-verdin increase SD regulator startup delay AM64 - am642-phyboard-electra-rdk trickle charger support - am64-phy* drop buswidth from sdhci nodes ---------------------------------------------------------------- Anurag Dutta (3): arm64: dts: ti: k3-j7200: Fix clock ids for MCSPI instances arm64: dts: ti: k3-j721e: Fix clock IDs for MCSPI instances arm64: dts: ti: k3-j721s2: Fix clock IDs for MCSPI instances Ayush Singh (1): arm64: dts: ti: k3-am625-beagleplay: Enable MikroBUS PWM Bryan Brattlof (4): arm64: dts: ti: k3-am62a: add opp frequencies arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry arm64: dts: ti: k3-am62p: add opp frequencies arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry Daniel Schultz (1): arm64: dts: ti: k3-am642-phyboard-electra-rdk: Enable trickle charger Dhruva Gole (1): arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon Francesco Dolcini (2): arm64: dts: ti: k3-am625-verdin: add TPM device arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay Garrett Giordano (2): arm64: dts: ti: am62-phycore-som: Increase cpu frequency to 1.4 GHz Revert "arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz" Hari Nagalla (5): arm64: dts: ti: k3-am62: Add M4F remoteproc node arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node arm64: dts: ti: k3-am64: Add M4F remoteproc node arm64: dts: ti: k3-am642-sk: Add M4F remoteproc node arm64: dts: ti: k3-am642-evm: Add M4F remoteproc node Jared McArthur (1): arm64: dts: ti: k3-j7200: Fix register map for main domain pmx John Ma (3): arm64: dts: ti: k3-am64-phycore-som: Fix bus-width property in MMC nodes arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fix bus-width property in MMC nodes arm64: dts: ti: k3-am62x-phyboard-lyra: Fix indentation in audio-card João Paulo Gonçalves (4): arm64: dts: ti: k3-am62-verdin: Fix SoM ADC compatible dt-bindings: arm: ti: Add verdin am62 ivy board arm64: dts: ti: k3-am62-verdin: add label to som adc node arm64: dts: ti: k3-am62-verdin: Add Ivy carrier board Judith Mendez (6): arm64: dts: ti: k3-am62-main: Add eQEP nodes arm64: dts: ti: k3-am62a-main: Add eQEP nodes arm64: dts: ti: k3-am62p-main: Add eQEP nodes arm64: dts: ti: k3-am64-main: Add eQEP nodes arm64: dts: ti: k3-am64x-sk: Enable eQEP arm64: dts: ti: k3-am62-main: Update otap/itap values Krzysztof Kozlowski (1): arm64: dts: ti: minor whitespace cleanup MD Danish Anwar (4): arm64: dts: ti: k3-am65-main: Add ti,pruss-pa-st node arm64: dts: ti: k3-am654-icssg2: Add ti,pa-stats property arm64: dts: ti: k3-am64-main: Add ti,pruss-pa-st node arm64: dts: ti: k3-am64: Add ti,pa-stats property Manorit Chawdhry (17): arm64: dts: ti: Refactor J784s4 SoC files to a common file arm64: dts: ti: Refactor J784s4-evm to a common file dt-bindings: arm: ti: Add bindings for J742S2 SoCs and Boards arm64: dts: ti: Introduce J742S2 SoC family arm64: dts: ti: Add support for J742S2 EVM board arm64: dts: ti: k3-j784s4-j742s2-mcu-wakeup: Move bootph from mcu_timer1 to mcu_timer0 arm64: dts: ti: k3-j784s4-j742s2-mcu-wakeup: Remove parent nodes bootph-* arm64: dts: ti: k3-j784s4: Add bootph-* properties arm64: dts: ti: k3-j721s2: Add bootph-* properties arm64: dts: ti: k3-j721e: Add bootph-* properties arm64: dts: ti: k3-j7200: Add bootph-* properties arm64: dts: ti: k3-j784s4-j742s2-evm-common: Remove parent nodes bootph-* arm64: dts: ti: k3-j721s2-evm*: Add bootph-* properties arm64: dts: ti: k3-am68-sk*: Add bootph-* properties arm64: dts: ti: k3-j721e-evm*: Add bootph-* properties arm64: dts: ti: k3-j721e-sk*: Add bootph-* properties arm64: dts: ti: k3-j7200-evm*: Add bootph-* properties Nathan Morrisson (2): arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs arm64: dts: ti: k3-am62a7-phyboard-lyra-rdk: Update ethernet internal delay Siddharth Vadapalli (2): arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: k3-am642-evm: Add overlay for PCIe0 EP mode Wadim Egorov (2): arm64: dts: ti: k3-am62-phycore-som: Add M4F remoteproc nodes arm64: dts: ti: k3-am64-phycore-som: Add M4F remoteproc nodes Documentation/devicetree/bindings/arm/ti/k3.yaml | 8 + arch/arm64/boot/dts/ti/Makefile | 18 +- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 74 +- arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 13 + arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 37 +- arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi | 655 +++ arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 12 +- arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 9 +- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 12 + .../boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso | 20 - arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-ivy.dts | 22 + arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-ivy.dts | 22 + arch/arm64/boot/dts/ti/k3-am625.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 27 + arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 5 + arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts | 4 + arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 9 + arch/arm64/boot/dts/ti/k3-am62a7.dtsi | 51 + arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 27 + arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi | 5 + arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 9 + arch/arm64/boot/dts/ti/k3-am62p5.dtsi | 47 + arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi | 6 +- arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 19 + arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 37 + arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 13 + arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 29 +- arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso | 51 + arch/arm64/boot/dts/ti/k3-am642-evm.dts | 22 +- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 5 +- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 36 + arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 15 + arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 1 + arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 2 + arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 8 + arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 5 +- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 15 +- arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso | 53 + arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 40 +- arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 17 +- arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 6 + arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 16 + arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 + arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 16 +- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 18 + arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 5 + arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 14 + arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 17 +- arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 19 +- arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 3 + arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j742s2-evm.dts | 26 + arch/arm64/boot/dts/ti/k3-j742s2-main.dtsi | 45 + arch/arm64/boot/dts/ti/k3-j742s2.dtsi | 98 + arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 1488 +---- arch/arm64/boot/dts/ti/k3-j784s4-j742s2-common.dtsi | 148 + arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi | 1481 +++++ arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 2671 +++++++++ ...u-wakeup.dtsi => k3-j784s4-j742s2-mcu-wakeup-common.dtsi} | 12 +- ...4s4-thermal.dtsi => k3-j784s4-j742s2-thermal-common.dtsi} | 0 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 2847 +--------- arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 133 +- 62 files changed, 6066 insertions(+), 4463 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi delete mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-ivy.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-ivy.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-j742s2-evm.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j742s2-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j742s2.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-common.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi rename arch/arm64/boot/dts/ti/{k3-j784s4-mcu-wakeup.dtsi => k3-j784s4-j742s2-mcu-wakeup-common.dtsi} (99%) rename arch/arm64/boot/dts/ti/{k3-j784s4-thermal.dtsi => k3-j784s4-j742s2-thermal-common.dtsi} (100%)

Message ID	3ded4795-2186-4e06-bda6-9c9a65a3fdb9@ti.com (mailing list archive)
State	New
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> Message-ID: <3ded4795-2186-4e06-bda6-9c9a65a3fdb9@ti.com> Date: Wed, 6 Nov 2024 19:25:19 +0530 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Content-Language: en-US From: Vignesh Raghavendra <vigneshr@ti.com> To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, arm-soc <arm@kernel.org>, SoC <soc@kernel.org> CC: Tero Kristo <kristo@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Nishanth Menon <nm@ti.com> Subject: [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.13 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="------------SIAwUcQ6quW1oiueQ4q6JF8H" Precedence: list Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	[GIT,PULL,1/2] arm64: dts: ti: K3 devicetree updates for v6.13 \| expand [GIT,PULL,1/2] arm64: dts: ti: K3 devicetree updates for v6.13 [GIT,PULL,2/2] arm64: defconfig: Updates for v6.13 for TI K3 platforms

[GIT,PULL,1/2] arm64: dts: ti: K3 devicetree updates for v6.13

Pull-request

Message