diff mbox series

[v7,10/11] arm64: defconfig: Enable RP1 misc/clock/gpio drivers

Message ID 4a84775f3dbdc0d66882563598b837eaf6328d9f.1738963156.git.andrea.porta@suse.com (mailing list archive)
State New
Headers show
Series Add support for RaspberryPi RP1 PCI device using a DT overlay | expand

Commit Message

Andrea della Porta Feb. 7, 2025, 9:31 p.m. UTC 
Select the RP1 drivers needed to operate the PCI endpoint containing
several peripherals such as Ethernet and USB Controller. This chip is
present on RaspberryPi 5.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index cb7da4415599..cc70793e97ef 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -618,6 +618,7 @@  CONFIG_PINCTRL_QCS615=y
 CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
+CONFIG_PINCTRL_RP1=m
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
@@ -700,6 +701,7 @@  CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
+CONFIG_MISC_RP1=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
@@ -1289,6 +1291,7 @@  CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_RP1=m
 CONFIG_COMMON_CLK_RS9_PCIE=y
 CONFIG_COMMON_CLK_VC3=y
 CONFIG_COMMON_CLK_VC5=y