diff mbox

[v2,1/3] ARM: tegra: enable MCP251x CAN controller and DS1307 RTC

Message ID 4cc13e0aba03a5b2d3e5f4049d252956342b1dad.1400103181.git.stefan@agner.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Agner May 14, 2014, 9:45 p.m. UTC 
From: Stefan Agner <stefan@agner.ch>

Toradex Colibri Evaluation Board uses the DS1307 RTC and the
MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30
module can be used on this carrier board, hence enable those
drivers in tegra_defonfig.

Furthermore the NVIDIA Tegra 3 based Apalis T30 module too
contains two MCP251x CAN controller.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/configs/tegra_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Stephen Warren May 15, 2014, 6:15 p.m. UTC | #1 
On 05/14/2014 03:45 PM, stefan@agner.ch wrote:
> From: Stefan Agner <stefan@agner.ch>
> 
> Toradex Colibri Evaluation Board uses the DS1307 RTC and the
> MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30
> module can be used on this carrier board, hence enable those
> drivers in tegra_defonfig.
> 
> Furthermore the NVIDIA Tegra 3 based Apalis T30 module too
> contains two MCP251x CAN controller.

I already applied v1 of this one patch.
diff mbox

Patch

diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 2926281..6329632 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -73,6 +73,11 @@  CONFIG_INET6_IPCOMP=y
 CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
@@ -222,6 +227,7 @@  CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TPS6586X=y