diff mbox series

[v3] dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML

Message ID 4e69a06d-7b53-ab48-1e50-2b29ff3a54e6@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v3] dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML | expand

Commit Message

Johan Jonker Sept. 18, 2022, 2:29 p.m. UTC
Convert rockchip,rk3128-cru.txt to YAML.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V3:
  Fix xin24m clock-names position

Changed V2:
  Use SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  Add more clocks

---

Rockchip recently replied on other clock-patches to dual-license the
binding.

https://lore.kernel.org/all/510d1180-bc8e-7820-c772-ed7f35447087@rock-chips.com/
From Finley with an  @rock-chips.com address, so this should be ok.

Document history:

git log Documentation/devicetree/bindings/clock/*rk312*.txt

Author: Elaine Zhang <zhangqing@rock-chips.com>
    dt-bindings: add documentation for rk3126 clock
Author: Elaine Zhang <zhangqing@rock-chips.com>
    dt-bindings: add bindings for rk3128 clock controller
---
 .../bindings/clock/rockchip,rk3128-cru.txt    | 58 --------------
 .../bindings/clock/rockchip,rk3128-cru.yaml   | 76 +++++++++++++++++++
 2 files changed, 76 insertions(+), 58 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml

Comments

Krzysztof Kozlowski Sept. 19, 2022, 6:57 a.m. UTC | #1
On 18/09/2022 16:29, Johan Jonker wrote:
> Convert rockchip,rk3128-cru.txt to YAML.
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V3:
>   Fix xin24m clock-names position
> 
> Changed V2:
>   Use SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>   Add more clocks
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
Heiko Stübner Sept. 23, 2022, 10:34 a.m. UTC | #2
On Sun, 18 Sep 2022 16:29:41 +0200, Johan Jonker wrote:
> Convert rockchip,rk3128-cru.txt to YAML.

Applied, thanks!

[1/1] dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML
      commit: f878a26a2a61abae9cb4d01a04a49dfac209b37c

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
deleted file mode 100644
index 6f8744fd301b..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@ 
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 000000000000..b3d9c8eca989
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@ 
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };