diff mbox

[5/8] power: supply: axp20x_battery: add support for AXP813

Message ID 545d3aa6339c9e33060d651c42d652d0b848c06b.1512396054.git-series.quentin.schulz@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Quentin Schulz Dec. 4, 2017, 2:12 p.m. UTC
The X-Powers AXP813 PMIC has got some slight differences from
AXP20X/AXP22X PMICs:
 - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24
 for AXP20X/AXP22X,
 - the constant charge current formula is different,

It also has a bit to tell whether the battery percentage returned by the
PMIC is valid.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
 drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

Comments

Jonathan Cameron Dec. 10, 2017, 4:49 p.m. UTC | #1
On Mon,  4 Dec 2017 15:12:51 +0100
Quentin Schulz <quentin.schulz@free-electrons.com> wrote:

> The X-Powers AXP813 PMIC has got some slight differences from
> AXP20X/AXP22X PMICs:
>  - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24
>  for AXP20X/AXP22X,
>  - the constant charge current formula is different,
> 
> It also has a bit to tell whether the battery percentage returned by the
> PMIC is valid.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>

I'd use switch statements when matching the IDs as that'll be more elegant
as you perhaps add further devices going forward...

Other than that, looks good to me.

Jonathan

> ---
>  drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++-
>  1 file changed, 43 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index 7494f0f..cb30302 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -46,6 +46,8 @@
>  #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
>  #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
>  
> +#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
> +
>  #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
>  #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
>  
> @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
>  	return 0;
>  }
>  
> +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> +					  int *val)
> +{
> +	int ret, reg;
> +
> +	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
> +	if (ret)
> +		return ret;
> +
> +	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {

You could do a lookup based from a table instead which might
be ever so slightly more elegant..

> +	case AXP20X_CHRG_CTRL1_TGT_4_1V:
> +		*val = 4100000;
> +		break;
> +	case AXP20X_CHRG_CTRL1_TGT_4_15V:
> +		*val = 4150000;
> +		break;
> +	case AXP20X_CHRG_CTRL1_TGT_4_2V:
> +		*val = 4200000;
> +		break;
> +	case AXP813_CHRG_CTRL1_TGT_4_35V:
> +		*val = 4350000;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
>  static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
>  {
>  	if (axp->axp_id == AXP209_ID)
>  		*val = *val * 100000 + 300000;
> +	else if (axp->axp_id == AXP813_ID)
> +		*val = *val * 200000 + 200000;
>  	else
>  		*val = *val * 150000 + 300000;

Switch?

>  }
> @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
>  {
>  	if (axp->axp_id == AXP209_ID)
>  		*val = (*val - 300000) / 100000;
> +	else if (axp->axp_id == AXP813_ID)
> +		*val = (*val - 200000) / 200000;
>  	else
>  		*val = (*val - 300000) / 150000;
>  }
> @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
>  		if (ret)
>  			return ret;
>  
> -		if (axp20x_batt->axp_id == AXP221_ID &&
> +		if ((axp20x_batt->axp_id == AXP221_ID ||
> +		     axp20x_batt->axp_id == AXP813_ID) &&
>  		    !(reg & AXP22X_FG_VALID))
>  			return -EINVAL;
>  
> @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
>  		if (axp20x_batt->axp_id == AXP209_ID)
>  			return axp20x_battery_get_max_voltage(axp20x_batt,
>  							      &val->intval);
> +		else if (axp20x_batt->axp_id == AXP813_ID)
> +			return axp813_battery_get_max_voltage(axp20x_batt,
> +							      &val->intval);
>  		return axp22x_battery_get_max_voltage(axp20x_batt,
>  						      &val->intval);

Worth converting to a switch statement to make it more elegant for future
devices?

>  
> @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = {
>  	}, {
>  		.compatible = "x-powers,axp221-battery-power-supply",
>  		.data = (void *)AXP221_ID,
> +	}, {
> +		.compatible = "x-powers,axp813-battery-power-supply",
> +		.data = (void *)AXP813_ID,
>  	}, { /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
Quentin Schulz Dec. 11, 2017, 8:35 a.m. UTC | #2
Hi Jonathan,

On 10/12/2017 17:49, Jonathan Cameron wrote:
> On Mon,  4 Dec 2017 15:12:51 +0100
> Quentin Schulz <quentin.schulz@free-electrons.com> wrote:
> 
>> The X-Powers AXP813 PMIC has got some slight differences from
>> AXP20X/AXP22X PMICs:
>>  - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24
>>  for AXP20X/AXP22X,
>>  - the constant charge current formula is different,
>>
>> It also has a bit to tell whether the battery percentage returned by the
>> PMIC is valid.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> 
> I'd use switch statements when matching the IDs as that'll be more elegant
> as you perhaps add further devices going forward...
> 
> Other than that, looks good to me.
> 

Well, I was wondering if it shouldn't be better to define a structure
for each device containing their quirks, functions, etc... like it is
done for the ADC or the ACIN power supply driver part.

struct axp20x_data {
	bool	has_valid_fg_reg;
	void 	constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val);
	void 	raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val);
	int 	get_max_voltage(struct axp20x_batt_ps *axp, int *val);
	[...]
};

static const struct of_device_id axp20x_battery_ps_id[] = {
	{ .compatible = "x-powers,axp209-battery-power-supply", .data = (void
*)&axp209_data, }, {}
};

void probe()
{
	[...]
	axp20x_batt->info = of_device_get_match_data(&pdev->dev);
	[...]
}

Sebastian, any objection on doing this?

Thanks,
Quentin

> Jonathan
> 
>> ---
>>  drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++-
>>  1 file changed, 43 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
>> index 7494f0f..cb30302 100644
>> --- a/drivers/power/supply/axp20x_battery.c
>> +++ b/drivers/power/supply/axp20x_battery.c
>> @@ -46,6 +46,8 @@
>>  #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
>>  #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
>>  
>> +#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
>> +
>>  #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
>>  #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
>>  
>> @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
>>  	return 0;
>>  }
>>  
>> +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
>> +					  int *val)
>> +{
>> +	int ret, reg;
>> +
>> +	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
> 
> You could do a lookup based from a table instead which might
> be ever so slightly more elegant..
> 
>> +	case AXP20X_CHRG_CTRL1_TGT_4_1V:
>> +		*val = 4100000;
>> +		break;
>> +	case AXP20X_CHRG_CTRL1_TGT_4_15V:
>> +		*val = 4150000;
>> +		break;
>> +	case AXP20X_CHRG_CTRL1_TGT_4_2V:
>> +		*val = 4200000;
>> +		break;
>> +	case AXP813_CHRG_CTRL1_TGT_4_35V:
>> +		*val = 4350000;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>>  static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
>>  {
>>  	if (axp->axp_id == AXP209_ID)
>>  		*val = *val * 100000 + 300000;
>> +	else if (axp->axp_id == AXP813_ID)
>> +		*val = *val * 200000 + 200000;
>>  	else
>>  		*val = *val * 150000 + 300000;
> 
> Switch?
> 
>>  }
>> @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
>>  {
>>  	if (axp->axp_id == AXP209_ID)
>>  		*val = (*val - 300000) / 100000;
>> +	else if (axp->axp_id == AXP813_ID)
>> +		*val = (*val - 200000) / 200000;
>>  	else
>>  		*val = (*val - 300000) / 150000;
>>  }
>> @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
>>  		if (ret)
>>  			return ret;
>>  
>> -		if (axp20x_batt->axp_id == AXP221_ID &&
>> +		if ((axp20x_batt->axp_id == AXP221_ID ||
>> +		     axp20x_batt->axp_id == AXP813_ID) &&
>>  		    !(reg & AXP22X_FG_VALID))
>>  			return -EINVAL;
>>  
>> @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
>>  		if (axp20x_batt->axp_id == AXP209_ID)
>>  			return axp20x_battery_get_max_voltage(axp20x_batt,
>>  							      &val->intval);
>> +		else if (axp20x_batt->axp_id == AXP813_ID)
>> +			return axp813_battery_get_max_voltage(axp20x_batt,
>> +							      &val->intval);
>>  		return axp22x_battery_get_max_voltage(axp20x_batt,
>>  						      &val->intval);
> 
> Worth converting to a switch statement to make it more elegant for future
> devices?
> 
>>  
>> @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = {
>>  	}, {
>>  		.compatible = "x-powers,axp221-battery-power-supply",
>>  		.data = (void *)AXP221_ID,
>> +	}, {
>> +		.compatible = "x-powers,axp813-battery-power-supply",
>> +		.data = (void *)AXP813_ID,
>>  	}, { /* sentinel */ },
>>  };
>>  MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
>
Jonathan Cameron Dec. 12, 2017, 7:55 p.m. UTC | #3
On Mon, 11 Dec 2017 09:35:43 +0100
Quentin Schulz <quentin.schulz@free-electrons.com> wrote:

> Hi Jonathan,
> 
> On 10/12/2017 17:49, Jonathan Cameron wrote:
> > On Mon,  4 Dec 2017 15:12:51 +0100
> > Quentin Schulz <quentin.schulz@free-electrons.com> wrote:
> >   
> >> The X-Powers AXP813 PMIC has got some slight differences from
> >> AXP20X/AXP22X PMICs:
> >>  - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24
> >>  for AXP20X/AXP22X,
> >>  - the constant charge current formula is different,
> >>
> >> It also has a bit to tell whether the battery percentage returned by the
> >> PMIC is valid.
> >>
> >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>  
> > 
> > I'd use switch statements when matching the IDs as that'll be more elegant
> > as you perhaps add further devices going forward...
> > 
> > Other than that, looks good to me.
> >   
> 
> Well, I was wondering if it shouldn't be better to define a structure
> for each device containing their quirks, functions, etc... like it is
> done for the ADC or the ACIN power supply driver part.
> 

Even better.

> struct axp20x_data {
> 	bool	has_valid_fg_reg;
> 	void 	constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val);
> 	void 	raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val);
> 	int 	get_max_voltage(struct axp20x_batt_ps *axp, int *val);
> 	[...]
> };
> 
> static const struct of_device_id axp20x_battery_ps_id[] = {
> 	{ .compatible = "x-powers,axp209-battery-power-supply", .data = (void
> *)&axp209_data, }, {}
> };
> 
> void probe()
> {
> 	[...]
> 	axp20x_batt->info = of_device_get_match_data(&pdev->dev);
> 	[...]
> }
> 
> Sebastian, any objection on doing this?
> 
> Thanks,
> Quentin
> 
> > Jonathan
> >   
> >> ---
> >>  drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++-
> >>  1 file changed, 43 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> >> index 7494f0f..cb30302 100644
> >> --- a/drivers/power/supply/axp20x_battery.c
> >> +++ b/drivers/power/supply/axp20x_battery.c
> >> @@ -46,6 +46,8 @@
> >>  #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
> >>  #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
> >>  
> >> +#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
> >> +
> >>  #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
> >>  #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
> >>  
> >> @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> >>  	return 0;
> >>  }
> >>  
> >> +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> >> +					  int *val)
> >> +{
> >> +	int ret, reg;
> >> +
> >> +	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {  
> > 
> > You could do a lookup based from a table instead which might
> > be ever so slightly more elegant..
> >   
> >> +	case AXP20X_CHRG_CTRL1_TGT_4_1V:
> >> +		*val = 4100000;
> >> +		break;
> >> +	case AXP20X_CHRG_CTRL1_TGT_4_15V:
> >> +		*val = 4150000;
> >> +		break;
> >> +	case AXP20X_CHRG_CTRL1_TGT_4_2V:
> >> +		*val = 4200000;
> >> +		break;
> >> +	case AXP813_CHRG_CTRL1_TGT_4_35V:
> >> +		*val = 4350000;
> >> +		break;
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >>  static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
> >>  {
> >>  	if (axp->axp_id == AXP209_ID)
> >>  		*val = *val * 100000 + 300000;
> >> +	else if (axp->axp_id == AXP813_ID)
> >> +		*val = *val * 200000 + 200000;
> >>  	else
> >>  		*val = *val * 150000 + 300000;  
> > 
> > Switch?
> >   
> >>  }
> >> @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
> >>  {
> >>  	if (axp->axp_id == AXP209_ID)
> >>  		*val = (*val - 300000) / 100000;
> >> +	else if (axp->axp_id == AXP813_ID)
> >> +		*val = (*val - 200000) / 200000;
> >>  	else
> >>  		*val = (*val - 300000) / 150000;
> >>  }
> >> @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> >>  		if (ret)
> >>  			return ret;
> >>  
> >> -		if (axp20x_batt->axp_id == AXP221_ID &&
> >> +		if ((axp20x_batt->axp_id == AXP221_ID ||
> >> +		     axp20x_batt->axp_id == AXP813_ID) &&
> >>  		    !(reg & AXP22X_FG_VALID))
> >>  			return -EINVAL;
> >>  
> >> @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> >>  		if (axp20x_batt->axp_id == AXP209_ID)
> >>  			return axp20x_battery_get_max_voltage(axp20x_batt,
> >>  							      &val->intval);
> >> +		else if (axp20x_batt->axp_id == AXP813_ID)
> >> +			return axp813_battery_get_max_voltage(axp20x_batt,
> >> +							      &val->intval);
> >>  		return axp22x_battery_get_max_voltage(axp20x_batt,
> >>  						      &val->intval);  
> > 
> > Worth converting to a switch statement to make it more elegant for future
> > devices?
> >   
> >>  
> >> @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = {
> >>  	}, {
> >>  		.compatible = "x-powers,axp221-battery-power-supply",
> >>  		.data = (void *)AXP221_ID,
> >> +	}, {
> >> +		.compatible = "x-powers,axp813-battery-power-supply",
> >> +		.data = (void *)AXP813_ID,
> >>  	}, { /* sentinel */ },
> >>  };
> >>  MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);  
> >   
>
diff mbox

Patch

diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index 7494f0f..cb30302 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -46,6 +46,8 @@ 
 #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
 #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
 
+#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
+
 #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
 #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
 
@@ -123,10 +125,41 @@  static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
 	return 0;
 }
 
+static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int *val)
+{
+	int ret, reg;
+
+	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+	case AXP20X_CHRG_CTRL1_TGT_4_1V:
+		*val = 4100000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_15V:
+		*val = 4150000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_2V:
+		*val = 4200000;
+		break;
+	case AXP813_CHRG_CTRL1_TGT_4_35V:
+		*val = 4350000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
 {
 	if (axp->axp_id == AXP209_ID)
 		*val = *val * 100000 + 300000;
+	else if (axp->axp_id == AXP813_ID)
+		*val = *val * 200000 + 200000;
 	else
 		*val = *val * 150000 + 300000;
 }
@@ -135,6 +168,8 @@  static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
 {
 	if (axp->axp_id == AXP209_ID)
 		*val = (*val - 300000) / 100000;
+	else if (axp->axp_id == AXP813_ID)
+		*val = (*val - 200000) / 200000;
 	else
 		*val = (*val - 300000) / 150000;
 }
@@ -269,7 +304,8 @@  static int axp20x_battery_get_prop(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		if (axp20x_batt->axp_id == AXP221_ID &&
+		if ((axp20x_batt->axp_id == AXP221_ID ||
+		     axp20x_batt->axp_id == AXP813_ID) &&
 		    !(reg & AXP22X_FG_VALID))
 			return -EINVAL;
 
@@ -284,6 +320,9 @@  static int axp20x_battery_get_prop(struct power_supply *psy,
 		if (axp20x_batt->axp_id == AXP209_ID)
 			return axp20x_battery_get_max_voltage(axp20x_batt,
 							      &val->intval);
+		else if (axp20x_batt->axp_id == AXP813_ID)
+			return axp813_battery_get_max_voltage(axp20x_batt,
+							      &val->intval);
 		return axp22x_battery_get_max_voltage(axp20x_batt,
 						      &val->intval);
 
@@ -467,6 +506,9 @@  static const struct of_device_id axp20x_battery_ps_id[] = {
 	}, {
 		.compatible = "x-powers,axp221-battery-power-supply",
 		.data = (void *)AXP221_ID,
+	}, {
+		.compatible = "x-powers,axp813-battery-power-supply",
+		.data = (void *)AXP813_ID,
 	}, { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);