diff mbox

tty: serial: msm_serial: Use DT aliases

Message ID 54617251.10306@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Frank Rowand Nov. 11, 2014, 2:20 a.m. UTC
From: Frank Rowand <frank.rowand@sonymobile.com>

v2, changes from v1:
  - The patch this documents was updated to make the serialN alias
    optional instead of required.

Update devicetree binding for msm_serial to reflect msm_serial_probe()
getting line id from the serial alias.

Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
---
 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt |   15 +++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

Comments

Stephen Boyd Nov. 11, 2014, 2:23 a.m. UTC | #1
On 11/10/2014 06:20 PM, Frank Rowand wrote:
> From: Frank Rowand <frank.rowand@sonymobile.com>
>
> v2, changes from v1:
>   - The patch this documents was updated to make the serialN alias
>     optional instead of required.

Not sure we want this v2 vs v1 part, but

>
> Update devicetree binding for msm_serial to reflect msm_serial_probe()
> getting line id from the serial alias.
>
> Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
diff mbox

Patch

Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -27,11 +27,21 @@  Optional properties:
 - dmas: Should contain dma specifiers for transmit and receive channels
 - dma-names: Should contain "tx" for transmit and "rx" for receive channels
 
+Note: Each UART port should have an alias correctly numbered in the
+"aliases" node, according to serialN format, where N is the port number
+(non-negative decimal integer).  If the aliases are not present then
+the port numbers will be 0..(number of UARTS - 1), assigned in the driver
+probe order.
+
 Examples:
 
 A uartdm v1.4 device with dma capabilities.
 
-serial@f991e000 {
+aliases {
+	serial0 = &serial0;
+};
+
+serial0: serial@f991e000 {
 	compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 	reg = <0xf991e000 0x1000>;
 	interrupts = <0 108 0x0>;
@@ -43,7 +53,11 @@  serial@f991e000 {
 
 A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
 
-serial@19c40000 {
+aliases {
+	serial0 = &serial0;
+};
+
+serial0: serial@19c40000 {
 	compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 	reg = <0x19c40000 0x1000>,
 	      <0x19c00000 0x1000>;