diff mbox

[v2,2/3] reset: imx7: Fix always writing bits as 0

Message ID 54f436a1d2a11a379af642a3327312367ef95343.1532090446.git.leonard.crestez@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Leonard Crestez July 20, 2018, 12:47 p.m. UTC
Right now the only user of reset-imx7 is pci-imx6 and the
reset_control_assert and deassert calls on pciephy_reset don't toggle
the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
1 or 0 respectively.

The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
other registers like MIPIPHY and HSICPHY the bits are explicitly
documented as "1 means assert, 0 means deassert".

The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/reset/reset-imx7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Lucas Stach July 23, 2018, 9:41 a.m. UTC | #1
As this doesn't depend on any other patch in this series, I think it
would be fine if Philipp takes this patch through the reset tree.

Regards,
Lucas

Am Freitag, den 20.07.2018, 15:47 +0300 schrieb Leonard Crestez:
> Right now the only user of reset-imx7 is pci-imx6 and the
> reset_control_assert and deassert calls on pciephy_reset don't toggle
> the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
> 1 or 0 respectively.
> 
> The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
> other registers like MIPIPHY and HSICPHY the bits are explicitly
> documented as "1 means assert, 0 means deassert".
> 
> The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.
> 
> > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> > Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/reset/reset-imx7.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
> index 4db177bc89bc..fdeac1946429 100644
> --- a/drivers/reset/reset-imx7.c
> +++ b/drivers/reset/reset-imx7.c
> @@ -78,11 +78,11 @@ static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
>  static int imx7_reset_set(struct reset_controller_dev *rcdev,
> >  			  unsigned long id, bool assert)
>  {
> >  	struct imx7_src *imx7src = to_imx7_src(rcdev);
> >  	const struct imx7_src_signal *signal = &imx7_src_signals[id];
> > -	unsigned int value = 0;
> > +	unsigned int value = assert ? signal->bit : 0;
>  
> >  	switch (id) {
> >  	case IMX7_RESET_PCIEPHY:
> >  		/*
> >  		 * wait for more than 10us to release phy g_rst and
Philipp Zabel July 23, 2018, 11:02 a.m. UTC | #2
On Mon, 2018-07-23 at 11:41 +0200, Lucas Stach wrote:
> As this doesn't depend on any other patch in this series, I think it
> would be fine if Philipp takes this patch through the reset tree.
> 
> Regards,
> Lucas
> 
> Am Freitag, den 20.07.2018, 15:47 +0300 schrieb Leonard Crestez:
> > Right now the only user of reset-imx7 is pci-imx6 and the
> > reset_control_assert and deassert calls on pciephy_reset don't toggle
> > the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
> > 1 or 0 respectively.
> > 
> > The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
> > other registers like MIPIPHY and HSICPHY the bits are explicitly
> > documented as "1 means assert, 0 means deassert".
> > 
> > The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.
> > 
> > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> > > Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

Thank you, applied to reset/fixes.

regards
Philipp
diff mbox

Patch

diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 4db177bc89bc..fdeac1946429 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -78,11 +78,11 @@  static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
 static int imx7_reset_set(struct reset_controller_dev *rcdev,
 			  unsigned long id, bool assert)
 {
 	struct imx7_src *imx7src = to_imx7_src(rcdev);
 	const struct imx7_src_signal *signal = &imx7_src_signals[id];
-	unsigned int value = 0;
+	unsigned int value = assert ? signal->bit : 0;
 
 	switch (id) {
 	case IMX7_RESET_PCIEPHY:
 		/*
 		 * wait for more than 10us to release phy g_rst and