| Message ID | 55FA48BD.4050900@tul.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Petr Cvek <petr.cvek@tul.cz> writes: > This patch changes fast_mode settings for the normal and power I2C > controller on the HTC Magician machine. > > Connected device on the Power I2C: > - MAX1587A: working in the fast mode > > Connected devices on the Normal I2C: > - UDA1380: working in the fast mode > - OV9640: bus became stuck in the fast mode > > The OV9640 is not using a standard I2C protocol, but an SCCB variant. Maybe > it is not fully compatible in the fast mode. Therefore fast mode for normal > I2C is disabled. If you not using the OV9640 then you can enable the fast > mode for the UDA1380. > > Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Waiting for a week for Philipp's ack and queuing it after. Cheers. -- Robert
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 906df6d..86d395d 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -818,7 +818,16 @@ static struct platform_device strataflash = { */ static struct i2c_pxa_platform_data i2c_info = { - .fast_mode = 1, + /* FIXME both I2C devices should support fast mode */ + .fast_mode = 0, +}; + +/* + * PXA I2C power controller + */ + +static struct i2c_pxa_platform_data magician_i2c_power_info = { + .fast_mode = 1, }; /* @@ -866,7 +875,7 @@ static void __init magician_init(void) platform_add_devices(ARRAY_AND_SIZE(devices)); pxa_set_ficp_info(&magician_ficp_info); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&magician_i2c_power_info); pxa_set_i2c_info(&i2c_info); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info);
This patch changes fast_mode settings for the normal and power I2C controller on the HTC Magician machine. Connected device on the Power I2C: - MAX1587A: working in the fast mode Connected devices on the Normal I2C: - UDA1380: working in the fast mode - OV9640: bus became stuck in the fast mode The OV9640 is not using a standard I2C protocol, but an SCCB variant. Maybe it is not fully compatible in the fast mode. Therefore fast mode for normal I2C is disabled. If you not using the OV9640 then you can enable the fast mode for the UDA1380. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> --- arch/arm/mach-pxa/magician.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)