diff mbox series

[v3,1/4] arm64: defconfig: Enable Librem 5 devkit components

Message ID 5636a3d6e3217475e2a479248250d5c0e0a50e26.1610110514.git.agx@sigxcpu.org (mailing list archive)
State New, archived
Headers show
Series Config and device tree updates for the Librem 5 development kit | expand

Commit Message

Guido Günther Jan. 8, 2021, 12:57 p.m. UTC 
The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
https://source.puri.sm/Librem5/dvk-mx8m-bsb.

This enables drivers for the following hardware components that aren't
yet enabled in defconfig:

- Goodix GT5688 touchscreen
- iMX8MQ's PWM for the LCD backlight
- TI BQ25896 charge controller
- NXP SGTL5000 audio codec
- Microcrystal RV-4162-C7 RTC
- magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
- the SIMCom SIM7100E/A modem
- NXP PTN5110HQZ usb-c controller

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/configs/defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Shawn Guo Jan. 11, 2021, 12:23 a.m. UTC | #1 
On Fri, Jan 08, 2021 at 01:57:07PM +0100, Guido Günther wrote:
> The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
> https://source.puri.sm/Librem5/dvk-mx8m-bsb.
> 
> This enables drivers for the following hardware components that aren't
> yet enabled in defconfig:
> 
> - Goodix GT5688 touchscreen
> - iMX8MQ's PWM for the LCD backlight
> - TI BQ25896 charge controller
> - NXP SGTL5000 audio codec
> - Microcrystal RV-4162-C7 RTC
> - magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
> - the SIMCom SIM7100E/A modem
> - NXP PTN5110HQZ usb-c controller
> 
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Applied, thanks.
Guido Günther Jan. 11, 2021, 8:41 a.m. UTC | #2 
Hi,
On Mon, Jan 11, 2021 at 08:23:09AM +0800, Shawn Guo wrote:
> On Fri, Jan 08, 2021 at 01:57:07PM +0100, Guido Günther wrote:
> > The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
> > https://source.puri.sm/Librem5/dvk-mx8m-bsb.
> > 
> > This enables drivers for the following hardware components that aren't
> > yet enabled in defconfig:
> > 
> > - Goodix GT5688 touchscreen
> > - iMX8MQ's PWM for the LCD backlight
> > - TI BQ25896 charge controller
> > - NXP SGTL5000 audio codec
> > - Microcrystal RV-4162-C7 RTC
> > - magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
> > - the SIMCom SIM7100E/A modem
> > - NXP PTN5110HQZ usb-c controller
> > 
> > Signed-off-by: Guido Günther <agx@sigxcpu.org>
> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> Applied, thanks.

Thanks for applying this series!
 -- Guido
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 4bb16b93e5d9..078d3d86289f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -417,6 +417,7 @@  CONFIG_KEYBOARD_IMX_SC_KEY=m
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_GOODIX=m
 CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
@@ -566,6 +567,7 @@  CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_BQ25890=m
 CONFIG_CHARGER_BQ25980=m
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
@@ -747,6 +749,7 @@  CONFIG_SND_SOC_FSL_ASRC=m
 CONFIG_SND_SOC_FSL_MICFIL=m
 CONFIG_SND_SOC_FSL_EASRC=m
 CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_IMX_SGTL5000=m
 CONFIG_SND_SOC_IMX_SPDIF=m
 CONFIG_SND_SOC_IMX_AUDMIX=m
 CONFIG_SND_SOC_FSL_ASOC_CARD=m
@@ -773,6 +776,7 @@  CONFIG_SND_SOC_TEGRA210_ADMAIF=m
 CONFIG_SND_SOC_AK4613=m
 CONFIG_SND_SOC_ES7134=m
 CONFIG_SND_SOC_ES7241=m
+CONFIG_SND_SOC_GTM601=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_TAS571X=m
@@ -810,6 +814,7 @@  CONFIG_USB_ISP1760=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_CP210X=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_GADGET=y
@@ -829,6 +834,7 @@  CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_FS=y
 CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
+CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_FUSB302=m
 CONFIG_TYPEC_HD3SS3220=m
 CONFIG_TYPEC_TPS6598X=m
@@ -879,6 +885,7 @@  CONFIG_RTC_DRV_HYM8563=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_PCF85363=m
+CONFIG_RTC_DRV_M41T80=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_RV8803=m
 CONFIG_RTC_DRV_S5M=y
@@ -1043,11 +1050,13 @@  CONFIG_IIO_ST_LSM6DSX=m
 CONFIG_IIO_CROS_EC_LIGHT_PROX=m
 CONFIG_SENSORS_ISL29018=m
 CONFIG_VCNL4000=m
+CONFIG_IIO_ST_MAGN_3AXIS=m
 CONFIG_IIO_CROS_EC_BARO=m
 CONFIG_MPL3115=m
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_CROS_EC=m
+CONFIG_PWM_IMX27=m
 CONFIG_PWM_MESON=m
 CONFIG_PWM_RCAR=m
 CONFIG_PWM_ROCKCHIP=y