diff mbox series

[11/18] iommu/omap: Add IOMMU_DOMAIN_DMA support

Message ID 5ac3788f9f61f7698cfa9c5924d62714e230f678.1597931876.git.robin.murphy@arm.com (mailing list archive)
State New, archived
Headers show
Series Convert arch/arm to use iommu-dma | expand

Commit Message

Robin Murphy Aug. 20, 2020, 3:08 p.m. UTC
Now that arch/arm is wired up for default domains and iommu-dma,
implement the corresponding driver-side support for DMA domains.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 drivers/iommu/omap-iommu.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

Comments

Suman Anna Aug. 24, 2020, 9:39 p.m. UTC | #1
Hi Robin,

On 8/20/20 10:08 AM, Robin Murphy wrote:
> Now that arch/arm is wired up for default domains and iommu-dma,
> implement the corresponding driver-side support for DMA domains.
> 
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
> ---
>  drivers/iommu/omap-iommu.c | 22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
> index 71f29c0927fc..ea25c2fe0418 100644
> --- a/drivers/iommu/omap-iommu.c
> +++ b/drivers/iommu/omap-iommu.c
> @@ -9,6 +9,7 @@
>   *		Paul Mundt and Toshihiro Kobayashi
>   */
>  
> +#include <linux/dma-iommu.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/err.h>
>  #include <linux/slab.h>
> @@ -1574,13 +1575,19 @@ static struct iommu_domain *omap_iommu_domain_alloc(unsigned type)
>  {
>  	struct omap_iommu_domain *omap_domain;
>  
> -	if (type != IOMMU_DOMAIN_UNMANAGED)
> +	if (type != IOMMU_DOMAIN_UNMANAGED && type != IOMMU_DOMAIN_DMA)
>  		return NULL;
>  
>  	omap_domain = kzalloc(sizeof(*omap_domain), GFP_KERNEL);
>  	if (!omap_domain)
>  		return NULL;
>  
> +	if (type == IOMMU_DOMAIN_DMA &&
> +	    iommu_get_dma_cookie(&omap_domain->domain)) {
> +		kfree(omap_domain);
> +		return NULL;
> +	}
> +
>  	spin_lock_init(&omap_domain->lock);
>  
>  	omap_domain->domain.geometry.aperture_start = 0;
> @@ -1601,6 +1608,7 @@ static void omap_iommu_domain_free(struct iommu_domain *domain)
>  	if (omap_domain->dev)
>  		_omap_iommu_detach_dev(omap_domain, omap_domain->dev);
>  
> +	iommu_put_dma_cookie(&omap_domain->domain);
>  	kfree(omap_domain);
>  }
>  
> @@ -1736,6 +1744,17 @@ static struct iommu_group *omap_iommu_device_group(struct device *dev)
>  	return group;
>  }
>  
> +static int omap_iommu_of_xlate(struct device *dev,
> +			       struct of_phandle_args *args)
> +{
> +	/*
> +	 * Logically, some of the housekeeping from _omap_iommu_add_device()
> +	 * should probably move here, but the minimum we *need* is simply to
> +	 * cooperate with of_iommu at all to let iommu-dma work.
> +	 */
> +	return 0;
> +}
> +

I have tested this series, and it is breaking the OMAP remoteproc functionality.
We definitely need some more plumbing. I am currently getting MMU faults and
also the DMA allocated addresses are not coming from the device-specific CMA
pools (opposite of what Sakari has reported with OMAP3 ISP). Just removing the
of_xlate gets me back the expected allocations, and no MMU faults, but I don't
see any valid traces.

The MMU devices that the OMAP IOMMU driver deals with are not traditional
bus-level IOMMU devices, but local MMU devices that are present within a remote
processor sub-system or hardware accelerator (eg: OMAP3 ISP). The usage is also
slightly different between remoteprocs and OMAP3 ISP. The former uses the CMA
pools and iommu_map/unmap API (UNMANAGED iommu domain), as the allocated regions
need to be mapped using specific device addresses adhering to the firmware
linker map, while OMAP3 ISP uses it like a traditional DMA pool.

regards
Suman

>  static const struct iommu_ops omap_iommu_ops = {
>  	.domain_alloc	= omap_iommu_domain_alloc,
>  	.domain_free	= omap_iommu_domain_free,
> @@ -1747,6 +1766,7 @@ static const struct iommu_ops omap_iommu_ops = {
>  	.probe_device	= omap_iommu_probe_device,
>  	.release_device	= omap_iommu_release_device,
>  	.device_group	= omap_iommu_device_group,
> +	.of_xlate	= omap_iommu_of_xlate,
>  	.pgsize_bitmap	= OMAP_IOMMU_PGSIZES,
>  };
>  
>
diff mbox series

Patch

diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index 71f29c0927fc..ea25c2fe0418 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -9,6 +9,7 @@ 
  *		Paul Mundt and Toshihiro Kobayashi
  */
 
+#include <linux/dma-iommu.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -1574,13 +1575,19 @@  static struct iommu_domain *omap_iommu_domain_alloc(unsigned type)
 {
 	struct omap_iommu_domain *omap_domain;
 
-	if (type != IOMMU_DOMAIN_UNMANAGED)
+	if (type != IOMMU_DOMAIN_UNMANAGED && type != IOMMU_DOMAIN_DMA)
 		return NULL;
 
 	omap_domain = kzalloc(sizeof(*omap_domain), GFP_KERNEL);
 	if (!omap_domain)
 		return NULL;
 
+	if (type == IOMMU_DOMAIN_DMA &&
+	    iommu_get_dma_cookie(&omap_domain->domain)) {
+		kfree(omap_domain);
+		return NULL;
+	}
+
 	spin_lock_init(&omap_domain->lock);
 
 	omap_domain->domain.geometry.aperture_start = 0;
@@ -1601,6 +1608,7 @@  static void omap_iommu_domain_free(struct iommu_domain *domain)
 	if (omap_domain->dev)
 		_omap_iommu_detach_dev(omap_domain, omap_domain->dev);
 
+	iommu_put_dma_cookie(&omap_domain->domain);
 	kfree(omap_domain);
 }
 
@@ -1736,6 +1744,17 @@  static struct iommu_group *omap_iommu_device_group(struct device *dev)
 	return group;
 }
 
+static int omap_iommu_of_xlate(struct device *dev,
+			       struct of_phandle_args *args)
+{
+	/*
+	 * Logically, some of the housekeeping from _omap_iommu_add_device()
+	 * should probably move here, but the minimum we *need* is simply to
+	 * cooperate with of_iommu at all to let iommu-dma work.
+	 */
+	return 0;
+}
+
 static const struct iommu_ops omap_iommu_ops = {
 	.domain_alloc	= omap_iommu_domain_alloc,
 	.domain_free	= omap_iommu_domain_free,
@@ -1747,6 +1766,7 @@  static const struct iommu_ops omap_iommu_ops = {
 	.probe_device	= omap_iommu_probe_device,
 	.release_device	= omap_iommu_release_device,
 	.device_group	= omap_iommu_device_group,
+	.of_xlate	= omap_iommu_of_xlate,
 	.pgsize_bitmap	= OMAP_IOMMU_PGSIZES,
 };