| Message ID | 5fc955715c956eac0edf922623c87ab382e4295c.1723716331.git.stano.jakubek@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Cleanup Spreadtrum/Unisoc ARM64 DT (part 2) | expand |
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index c8b30c0479fd..0eb4aca0a139 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -94,17 +94,17 @@ pmic_adc: adc@480 { nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; }; - fuel-gauge@a00 { + pmic_fgu: fuel-gauge@a00 { compatible = "sprd,sc2731-fgu"; reg = <0xa00>; bat-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; io-channels = <&pmic_adc 3>, <&pmic_adc 6>; io-channel-names = "bat-temp", "charge-vol"; - monitored-battery = <&bat>; nvmem-cell-names = "fgu_calib"; nvmem-cells = <&fgu_calib>; interrupt-parent = <&sc2731_pmic>; interrupts = <4>; + status = "disabled"; }; vibrator@ec8 { diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts index cd8b1069e387..a5f6acafee3a 100644 --- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts @@ -84,6 +84,11 @@ bat: battery { }; }; +&pmic_fgu { + monitored-battery = <&bat>; + status = "okay"; +}; + &uart0 { status = "okay"; };
The monitored-battery property is a property of the board, not the PMIC. Move this property to the DTS of its only user, sp9860g-1h10. While at it, disable the fuel-gauge node by default and enable it only for its users, as it requires board-specific properties to work correctly. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- Note that the 'sprd,calib-resistance-micro-ohms' property isn't specified as I do not have the board or any other source of information about it. If the SPRD folks could chime in here, that'd be great. arch/arm64/boot/dts/sprd/sc2731.dtsi | 4 ++-- arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 5 +++++ 2 files changed, 7 insertions(+), 2 deletions(-)