@@ -47,19 +47,19 @@
compatible = "operating-points-v2";
opp-shared;
- opp@648000000 {
+ opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
opp-microvolt = <1040000 1040000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
- opp@816000000 {
+ opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1100000 1100000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
- opp@1008000000 {
+ opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1200000 1200000 1300000>;
clock-latency-ns = <244144>; /* 8 32k periods */
@@ -103,13 +103,13 @@
};
&cpu0_opp_table {
- opp@1104000000 {
+ opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <1320000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
- opp@1200000000 {
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1320000>;
clock-latency-ns = <244144>; /* 8 32k periods */
DTC will emit a warning on our OPPs nodes for the common DTSI between the A23 and A33 since those nodes use the frequency as unit addresses, but don't have a matching reg property. Fix this by moving the frequency to the node name instead. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 6 +++--- arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-)