diff mbox series

[V9,4/7] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node

Message ID 68bfce88fa5b4ec18a49a47695a90decf0b8763f.1663173478.git.quic_schowdhu@quicinc.com (mailing list archive)
State New, archived
Headers show
Series Add driver support for Data Capture and Compare Engine(DCC) for SM8150,SC7280,SC7180,SDM845 | expand

Commit Message

Souradeep Chowdhury Sept. 14, 2022, 5:01 p.m. UTC 
Add the DCC(Data Capture and Compare) device tree node entry along with
the addresses for register regions.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index d6d50b4..e0e1d3d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1627,6 +1627,12 @@ 
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		dma@10a2000 {
+			compatible = "qcom,sm8150-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ad000 0x0 0x3000>;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";