diff mbox

[v4,5/8] dt-bindings: panel: Add the Ilitek ILI9881c panel documentation

Message ID 69e479c147d28ada0adcf435783e839a3506216c.1522835818.git-series.maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard April 4, 2018, 9:57 a.m. UTC
The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the
ILI9881c from Ilitek.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
new file mode 100644
index 000000000000..df05e8bb4851
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
@@ -0,0 +1,20 @@ 
+Ilitek ILI9881c based MIPI-DSI panels
+
+Required properties:
+  - compatible: must be "ilitek,ili9881c" and one of:
+    * "bananapi,lhr050h41"
+  - reg: DSI virtual channel used by that screen
+  - power-gpios: a GPIO phandle for the power pin
+  - reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+  - backlight: phandle to the backlight used
+
+Example:
+panel@0 {
+	compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+	reg = <0>;
+	power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
+	reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+	backlight = <&pwm_bl>;
+};