Message ID | 6cd823201b9f4cde8de8eddc910f39ce@rwthex-s1-b.rwth-ad.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Nov 11, 2016 at 04:59:38PM +0100, christopher.spinrath@rwth-aachen.de wrote: > From: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> > > According to the schematics of CompuLab's sbc-fx6 baseboard and the > vendor devicetree GPIO_16 is *not* muxed to ENET_REF_CLK but to SPDIF_IN. > > Remove the wrong pinctrl setting. > > Fixes: 682d055e6ac5 ("ARM: dts: Add initial support for cm-fx6.") > Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Applied both, thanks.
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 59bc5a4..a150bca 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -183,7 +183,6 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; };