| Message ID | 7045264.74zTCWbb7p@wasted.cogentembedded.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Dec 29, 2014 at 11:04 PM, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote: > The R-Car CAN controllers can derive the CAN bus clock not only from their > peripheral clock input (clkp1) but also from the other internal clock (clkp2) > and external clock fed on CAN_CLK pin. Describe those clocks in the device > tree, along with the USB_EXTAL clock from which clkp2 is derived. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Index: renesas/arch/arm/boot/dts/r8a7790.dtsi =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi +++ renesas/arch/arm/boot/dts/r8a7790.dtsi @@ -838,16 +838,34 @@ clock-output-names = "audio_clk_c"; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "usb_extal"; + }; + + /* External CAN clock */ + can_clk: can_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "can_clk"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7790-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", - "z"; + "z", "rcan"; }; /* Variable factor clocks */ Index: renesas/include/dt-bindings/clock/r8a7790-clock.h =================================================================== --- renesas.orig/include/dt-bindings/clock/r8a7790-clock.h +++ renesas/include/dt-bindings/clock/r8a7790-clock.h @@ -21,6 +21,7 @@ #define R8A7790_CLK_SD0 7 #define R8A7790_CLK_SD1 8 #define R8A7790_CLK_Z 9 +#define R8A7790_CLK_RCAN 10 /* MSTP0 */ #define R8A7790_CLK_MSIOF0 0
The R-Car CAN controllers can derive the CAN bus clock not only from their peripheral clock input (clkp1) but also from the other internal clock (clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in the device tree, along with the USB_EXTAL clock from which clkp2 is derived. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- arch/arm/boot/dts/r8a7790.dtsi | 22 ++++++++++++++++++++-- include/dt-bindings/clock/r8a7790-clock.h | 1 + 2 files changed, 21 insertions(+), 2 deletions(-)