new file mode 100644
@@ -0,0 +1,238 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "axis,artpec6";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&pl310>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&pl310>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ psci_version = <0x84000000>;
+ cpu_on = <0x84000003>;
+ system_reset = <0x84000009>;
+ };
+
+ scu@faf00000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfaf00000 0x58>;
+ };
+
+ /* Main external clock driving CPU and peripherals */
+ ext_clk: ext_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ /* PLL1 is used by CPU and some peripherals */
+ pll1_clk: pll1_clk@f8000000 {
+ #clock-cells = <0>;
+ compatible = "axis,artpec6-pll1-clock";
+ reg = <0xf8000000 4>;
+ clocks = <&ext_clk>;
+ };
+
+ cpu_clk: cpu_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&pll1_clk>;
+ clock-output-names = "cpu_clk";
+ };
+
+ cpu_clkdiv2: cpu_clkdiv2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&cpu_clk>;
+ };
+
+ cpu_clkdiv4: cpu_clkdiv4 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&cpu_clk>;
+ };
+
+ apb_pclk: apb_pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&cpu_clk>;
+ clock-output-names = "apb_pclk";
+ };
+
+ /* PLL2 is used by a number of peripherals, including UDL */
+ pll2: pll2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <24>;
+ clocks = <&ext_clk>;
+ };
+
+ /* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */
+ pll2div2: pll2div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+
+ pll2div12: pll2div12 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <12>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+
+ pll2div24: pll2div24 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ clock-output-names = "uart_clk";
+ };
+
+
+ gtimer@faf00200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xfaf00200 0x20>;
+ interrupts = <GIC_PPI 11 0xf01>;
+ clocks = <&cpu_clkdiv2>;
+ };
+
+ timer@faf00600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfaf00600 0x20>;
+ interrupts = <GIC_PPI 13 0xf04>;
+ clocks = <&cpu_clkdiv2>;
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@faf01000 {
+ interrupt-controller;
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+ };
+
+ pl310: cache-controller@faf10000 {
+ compatible = "arm,pl310-cache";
+ cache-unified;
+ cache-level = <2>;
+ reg = <0xfaf10000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <1 1 1>;
+ arm,filter-ranges = <0x0 0x80000000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ };
+
+ amba@0 {
+ compatible = "simple-bus";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ dma-ranges = <0x80000000 0x00000000 0x40000000>;
+ dma-coherent;
+
+ ethernet: ethernet@f8010000 {
+ clock-names = "phy_ref_clk", "apb_pclk";
+ clocks = <&ext_clk>, <&apb_pclk>;
+ compatible = "snps,dwc-qos-ethernet-4.10";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf8010000 0x4000>;
+
+ snps,write-requests = <2>;
+ snps,read-requests = <16>;
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+
+ status = "disabled";
+ };
+
+ uart0: uart@f8036000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8036000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ uart1: uart@f8037000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8037000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ uart2: uart@f8038000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8038000 0x1000>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ uart3: uart@f8039000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8039000 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
Signed-off-by: Lars Persson <larper@axis.com> --- arch/arm/boot/dts/artpec6.dtsi | 238 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 arch/arm/boot/dts/artpec6.dtsi