diff mbox series

[1/3] pwm: stm32: Improve precision of calculation in .apply()

Message ID 7628ecd8a7538aa5a7397f0fc4199a077168e8a6.1710711976.git.u.kleine-koenig@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series pwm: stm32: Some improvements | expand

Commit Message

Uwe Kleine-König March 17, 2024, 9:52 p.m. UTC
While mathematically it's ok to calculate the number of cyles for the
duty cycle as:

	duty_cycles = period_cycles * duty_ns / period_ns

this doesn't always give the right result when doing integer math. This
is best demonstrated using an example: With the input clock running at
208877930 Hz a request for duty_cycle = 383 ns and period = 49996 ns
results in

	period_cycles = clkrate * period_ns / NSEC_PER_SEC = 10443.06098828

Now calculating duty_cycles with the above formula gives:

	duty_cycles = 10443.06098828 * 383 / 49996 = 80.00024719

However with period_cycle truncated to an integer results in:

	duty_cycles = 10443 * 383 / 49996 = 79.99977998239859

So while a value of (a little more than) 80 would be the right result,
only 79 is used here. The problem here is that 14443 is a rounded result
that should better not be used to do further math. So to fix that use
the exact formular similar to how period_cycles is calculated.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/pwm/pwm-stm32.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
index ffe572b76174..fb714936ff8f 100644
--- a/drivers/pwm/pwm-stm32.c
+++ b/drivers/pwm/pwm-stm32.c
@@ -351,8 +351,9 @@  static int stm32_pwm_config(struct stm32_pwm *priv, unsigned int ch,
 	regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE);
 
 	/* Calculate the duty cycles */
-	dty = prd * duty_ns;
-	do_div(dty, period_ns);
+	dty = (unsigned long long)clk_get_rate(priv->clk) * duty_ns;
+	do_div(dty, prescaler + 1);
+	do_div(dty, NSEC_PER_SEC);
 
 	regmap_write(priv->regmap, TIM_CCR1 + 4 * ch, dty);