[v5,14/16] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file

Message ID	815a458de74b79eb649972de786e647be3846424.1595572867.git.frank@allwinnertech.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=hBxD=BD=lists.infradead.org=linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 59E452070B From: Frank Lee <frank@allwinnertech.com> To: robh+dt@kernel.org, mripard@kernel.org, wens@csie.org Subject: [PATCH v5 14/16] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Date: Fri, 24 Jul 2020 15:18:24 +0800 Message-Id: <815a458de74b79eb649972de786e647be3846424.1595572867.git.frank@allwinnertech.com> In-Reply-To: <cover.1595572867.git.frank@allwinnertech.com> References: <cover.1595572867.git.frank@allwinnertech.com> MIME-Version: 1.0 summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at https://www.dnswl.org/, no trust [121.197.207.205 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines Precedence: list Cc: devicetree@vger.kernel.org, liyong@allwinnertech.com, tiny.windzz@gmail.com, linux-kernel@vger.kernel.org, huangshuosheng@allwinnertech.com, Yangtao Li <frank@allwinnertech.com>, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	Allwinner A100 Initial support \| expand [v5,00/16] Allwinner A100 Initial support [v5,01/16] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU [v5,02/16] clk: sunxi-ng: add support for the Allwinner A100 CCU [v5,03/16] dt-bindings: pinctrl: sunxi: Get rid of continual nesting [v5,04/16] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings [v5,05/16] pinctrl: sunxi: add support for the Allwinner A100 pin controller [v5,06/16] dt-bindings: nvmem: SID: add binding for A100's SID controller [v5,07/16] dt-bindings: thermal: sun8i: Add binding for A100's THS controller [v5,08/16] thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate [v5,09/16] thermal: sun8i: Add A100's THS controller support [v5,11/16] dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi [v5,12/16] dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller [v5,14/16] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file [v5,15/16] dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings [v5,16/16] arm64: allwinner: A100: add support for Allwinner Perf1 board

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi new file mode 100644 index 000000000000..cc321c04f121 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-a100-ccu.h> +#include <dt-bindings/clock/sun50i-a100-r-ccu.h> +#include <dt-bindings/reset/sun50i-a100-ccu.h> +#include <dt-bindings/reset/sun50i-a100-r-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + dcxo24M: dcxo24M-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "dcxo24M"; + #clock-cells = <0>; + }; + + iosc: internal-osc-clk { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + #clock-cells = <0>; + }; + + osc32k: osc32k-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x3fffffff>; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-a100-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&dcxo24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, <0x03022000 0x2000>, + <0x03024000 0x2000>, <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + efuse@3006000 { + compatible = "allwinner,sun50i-a100-sid", + "allwinner,sun50i-a64-sid"; + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: calib@14 { + reg = <0x14 8>; + }; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-a100-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + uart0_pb_pins: uart0-pb-pins { + pins = "PB9", "PB10"; + function = "uart0"; + }; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@5001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@5002c00 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002c00 0x400>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-a100-ths"; + reg = <0x05070400 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-a100-r-ccu"; + reg = <0x07010000 0x300>; + clocks = <&dcxo24M>, <&osc32k>, <&iosc>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_intc: interrupt-controller@7010320 { + compatible = "allwinner,sun50i-a100-nmi", + "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x07010320 0xc>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-a100-r-pinctrl"; + reg = <0x07022000 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + r_i2c0_pins: r-i2c0-pins { + pins = "PL0", "PL1"; + function = "s_i2c0"; + }; + + r_i2c1_pins: r-i2c1-pins { + pins = "PL8", "PL9"; + function = "s_i2c1"; + }; + }; + + r_uart: serial@7080000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07080000 0x400>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&r_ccu CLK_R_APB2_UART>; + resets = <&r_ccu RST_R_APB2_UART>; + status = "disabled"; + }; + + r_i2c0: i2c@7081400 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_I2C0>; + resets = <&r_ccu RST_R_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_i2c1: i2c@7081800 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081800 0x400>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_I2C1>; + resets = <&r_ccu RST_R_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + thermal-zones { + cpu-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + ddr-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; + + gpu-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; +};

[v5,14/16] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file

Commit Message

Comments

Patch