diff mbox series

[5/7] drm/modes: Support modes names on the command line

Message ID 84e1fb2ff08ad3a5ba3707bc937ba7fe6be15adc.1551711042.git-series.maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show
Series drm/vc4: Allow for more boot-time configuration | expand

Commit Message

Maxime Ripard March 4, 2019, 2:52 p.m. UTC
From: Maxime Ripard <maxime.ripard@free-electrons.com>

The drm subsystem also uses the video= kernel parameter, and in the
documentation refers to the fbdev documentation for that parameter.

However, that documentation also says that instead of giving the mode using
its resolution we can also give a name. However, DRM doesn't handle that
case at the moment. Even though in most case it shouldn't make any
difference, it might be useful for analog modes, where different standards
might have the same resolution, but still have a few different parameters
that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example).

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/gpu/drm/drm_connector.c |  3 +-
 drivers/gpu/drm/drm_fb_helper.c |  4 +++-
 drivers/gpu/drm/drm_modes.c     | 49 +++++++++++++++++++++++-----------
 include/drm/drm_connector.h     |  1 +-
 4 files changed, 41 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index dd40eff0911c..799e932c114d 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -139,8 +139,9 @@  static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
 		connector->force = mode->force;
 	}
 
-	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+	DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
 		      connector->name,
+		      mode->name ? mode->name : "",
 		      mode->xres, mode->yres,
 		      mode->refresh_specified ? mode->refresh : 60,
 		      mode->rb ? " reduced blanking" : "",
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 0e9349ff2d16..cacc4b56344e 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -2158,6 +2158,10 @@  struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *f
 	prefer_non_interlace = !cmdline_mode->interlace;
 again:
 	list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
+		/* Check (optional) mode name first */
+		if (!strcmp(mode->name, cmdline_mode->name))
+			return mode;
+
 		/* check width/height */
 		if (mode->hdisplay != cmdline_mode->xres ||
 		    mode->vdisplay != cmdline_mode->yres)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 31d61940c007..3d843d17370a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1557,7 +1557,7 @@  bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 					       struct drm_cmdline_mode *mode)
 {
 	const char *name;
-	bool parse_extras = false;
+	bool named_mode = false, parse_extras = false;
 	unsigned int bpp_off = 0, refresh_off = 0;
 	unsigned int mode_end = 0;
 	char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
@@ -1576,8 +1576,14 @@  bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 
 	name = mode_option;
 
+	/*
+	 * If the first character is not a digit, then it means that
+	 * we have a named mode.
+	 */
 	if (!isdigit(name[0]))
-		return false;
+		named_mode = true;
+	else
+		named_mode = false;
 
 	/* Try to locate the bpp and refresh specifiers, if any */
 	bpp_ptr = strchr(name, '-');
@@ -1607,12 +1613,16 @@  bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		parse_extras = true;
 	}
 
-	ret = drm_mode_parse_cmdline_res_mode(name, mode_end,
-					      parse_extras,
-					      connector,
-					      mode);
-	if (ret)
-		return false;
+	if (named_mode) {
+		strncpy(mode->name, name, mode_end);
+	} else {
+		ret = drm_mode_parse_cmdline_res_mode(name, mode_end,
+						      parse_extras,
+						      connector,
+						      mode);
+		if (ret)
+			return false;
+	}
 	mode->specified = true;
 
 	if (bpp_ptr) {
@@ -1640,14 +1650,23 @@  bool drm_mode_parse_command_line_for_connector(const char *mode_option,
 		extra_ptr = refresh_end_ptr;
 
 	if (extra_ptr) {
-		int remaining = strlen(name) - (extra_ptr - name);
+		if (!named_mode) {
+			int len = strlen(name) - (extra_ptr - name);
 
-		/*
-		 * We still have characters to process, while
-		 * we shouldn't have any
-		 */
-		if (remaining > 0)
-			return false;
+			ret = drm_mode_parse_cmdline_extra(extra_ptr, len,
+							   connector, mode);
+			if (ret)
+				return false;
+		} else {
+			int remaining = strlen(name) - (extra_ptr - name);
+
+			/*
+			 * We still have characters to process, while
+			 * we shouldn't have any
+			 */
+			if (remaining > 0)
+				return false;
+		}
 	}
 
 	return true;
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 8fe22abb1e10..215761153245 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -823,6 +823,7 @@  struct drm_connector_funcs {
 
 /* mode specified on the command line */
 struct drm_cmdline_mode {
+	char name[DRM_DISPLAY_MODE_LEN];
 	bool specified;
 	bool refresh_specified;
 	bool bpp_specified;