diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..c6dd4de 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-netgear-rn2120.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-karo-tx25.dtb \
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
new file mode 100644
index 0000000..ba1e0de
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,288 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-xp-mv78230.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to first Marvell 88SE9170 SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to second Marvell 88SE9170 SATA controller */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				poweroff: poweroff {
+					marvell,pins = "mpp42";
+					marvell,function = "gpio";
+				};
+
+				power_button_pin: power-button-pin {
+					marvell,pins = "mpp27";
+					marvell,function = "gpio";
+				};
+
+				reset_button_pin: reset-button-pin {
+					marvell,pins = "mpp41";
+					marvell,function = "gpio";
+				};
+
+				sata1_led_pin: sata1-led-pin {
+					marvell,pins = "mpp31";
+					marvell,function = "gpio";
+				};
+
+				sata2_led_pin: sata2-led-pin {
+					marvell,pins = "mpp40";
+					marvell,function = "gpio";
+				};
+
+				sata3_led_pin: sata3-led-pin {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+
+				sata4_led_pin: sata4-led-pin {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				sata1_power_pin: sata1-power-pin {
+					marvell,pins = "mpp24";
+					marvell,function = "gpio";
+				};
+
+				sata2_power_pin: sata2-power-pin {
+					marvell,pins = "mpp25";
+					marvell,function = "gpio";
+				};
+
+				sata3_power_pin: sata3-power-pin {
+					marvell,pins = "mpp26";
+					marvell,function = "gpio";
+				};
+
+				sata4_power_pin: sata4-power-pin {
+					marvell,pins = "mpp28";
+					marvell,function = "gpio";
+				};
+
+				sata1_pres_pin: sata1-pres-pin {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+
+				sata2_pres_pin: sata2-pres-pin {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				sata3_pres_pin: sata3-pres-pin {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				sata4_pres_pin: sata4-pres-pin {
+					marvell,pins = "mpp35";
+					marvell,function = "gpio";
+				};
+
+				err_led_pin: err-led-pin {
+					marvell,pins = "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				clocks = <&coreclk 0>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					compatible = "marvell,88e1318s";
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					compatible = "marvell,88e1318s";
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv78230-i2c";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762_oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red_sata1_led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red_sata2_led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red_sata3_led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red_sata4_led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red_err_led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power_button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset_button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};
