diff mbox

[2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board

Message ID 925c5e76e33d87988f43ccf624e88d976d15651d.1516200065.git.michal.simek@xilinx.com (mailing list archive)
State New, archived
Headers show

Commit Message

Michal Simek Jan. 17, 2018, 2:41 p.m. UTC
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 679cd258bc1f..fa62546ebfb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1041,6 +1041,7 @@  dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
new file mode 100644
index 000000000000..b1cfb4ede434
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,92 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi1 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@0 {
+		compatible = "sst25wf080", "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@test {
+			label = "spi-flash";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};