[43/77] ARM: dts: sun7i: Change pinctrl nodes to avoid warning

Message ID	957b3c14ba05e6658aa767466d9c76b037723ce7.1543321707.git-series.maxime.ripard@bootlin.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Maxime Ripard <maxime.ripard@bootlin.com> To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime.ripard@bootlin.com> Subject: [PATCH 43/77] ARM: dts: sun7i: Change pinctrl nodes to avoid warning Date: Tue, 27 Nov 2018 13:45:44 +0100 Message-Id: <957b3c14ba05e6658aa767466d9c76b037723ce7.1543321707.git-series.maxime.ripard@bootlin.com> In-Reply-To: <cover.9a6e7d31e872acad71b4bc7f9edfc24ab01c22c3.1543321707.git-series.maxime.ripard@bootlin.com> References: <cover.9a6e7d31e872acad71b4bc7f9edfc24ab01c22c3.1543321707.git-series.maxime.ripard@bootlin.com> MIME-Version: 1.0 Precedence: list Cc: linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org
Series	ARM: dts: sunxi: Cleanup DTC warnings \| expand [00/77] ARM: dts: sunxi: Cleanup DTC warnings [01/77] ARM: dts: sun4i: Fix gpio-keys warning [02/77] ARM: dts: sun4i: Fix HDMI output DTC warning [03/77] ARM: dts: sun5i: Change framebuffer node names to avoid warnings [04/77] ARM: dts: sun5i: Fix display pipeline endpoint warnings in DTC [05/77] ARM: dts: sun5i: Change clock node names to avoid warnings [06/77] ARM: dts: sun5i: Remove skeleton to avoid warnings [07/77] ARM: dts: sun5i: Remove SoC node unit-name to avoid warnings [08/77] ARM: dts: sun5i: Remove redundant interrupt-controller [09/77] ARM: dts: sun5i: Change LRADC node names to avoid warnings [10/77] ARM: dts: sun5i: Remove all useless pinctrl nodes [11/77] ARM: dts: sun5i: Remove card detect pull-up [12/77] ARM: dts: sun5i: Change pinctrl nodes to avoid warning [13/77] ARM: dts: sun5i: a10s: Fix HDMI output DTC warning [14/77] ARM: dts: sunxi: Change default CMA pool node name [15/77] ARM: dts: sunxi: Remove the CMA node label [16/77] ARM: dts: sun5i: Remove underscores from nodes names [17/77] ARM: dts: sunxi: Change LRADC node names to avoid warnings [18/77] ARM: dts: sun5i: Fix Display Engine DTC warnings [19/77] ARM: dts: sun5i: A10s: Remove empty SRAM node [20/77] ARM: dts: sun5i: Remove underscores from nodes names [21/77] ARM: dts: sun5i: Provide default muxing for relevant controllers [22/77] ARM: dts: sun6i: Remove skeleton and memory to avoid warnings [23/77] ARM: dts: sun6i: Change framebuffer node names to avoid warnings [24/77] ARM: dts: sun6i: Change clock node names to avoid warnings [25/77] ARM: dts: sun6i: Remove SoC node unit-name to avoid warnings [26/77] ARM: dts: sun6i: Fix Display Engine DTC warnings [27/77] ARM: dts: sun6i: Change LRADC node names to avoid warnings [28/77] ARM: dts: sun6i: Remove all useless pinctrl nodes [29/77] ARM: dts: sun6i: Remove card detect pull-up [30/77] ARM: dts: sun6i: Remove redundant MMC pinmux tuning [31/77] ARM: dts: sun6i: Change pinctrl nodes to avoid warning [32/77] ARM: dts: sun6i: Remove underscores from nodes names [33/77] ARM: dts: sun6i: colombus: Change i2c node name to avoid warnings [34/77] ARM: dts: sun6i: Provide default muxing for relevant controllers [35/77] ARM: dts: sun7i: Remove skeleton and memory to avoid warnings [36/77] ARM: dts: sun7i: Remove SoC node unit-name to avoid warnings [37/77] ARM: dts: sun7i: Change clock node names to avoid warnings [38/77] ARM: dts: sun7i: Change framebuffer node names to avoid warnings [39/77] ARM: dts: sun7i: Remove all useless pinctrl nodes [40/77] ARM: dts: sun7i: Remove card detect pull-up [41/77] ARM: dts: sun7i: Change LRADC node names to avoid warnings [42/77] ARM: dts: sun7i: Remove gpio-keys warnings [43/77] ARM: dts: sun7i: Change pinctrl nodes to avoid warning [44/77] ARM: dts: sun7i: Split the RTS and CTS pins out of the UART nodes [45/77] ARM: dts: sun7i: som204: Use the UART3 TX and RX pin group [46/77] ARM: dts: sun7i: Remove underscores from nodes names [47/77] ARM: dts: sun7i: Fix HDMI output DTC warning [48/77] ARM: dts: sun7i: Provide default muxing for relevant controllers [49/77] ARM: dts: sun7i: Remove redundant MMC pinmux tuning [50/77] ARM: dts: sun7i: lamobo-r1: Remove unused address-cells/size-cells [51/77] ARM: dts: sun8i: a23/a33: Remove skeleton and memory to avoid warnings [52/77] ARM: dts: sun8i: a23/a33: Remove SoC node unit-name to avoid warnings [53/77] ARM: dts: sun8i: a23/a33: Fix Display Engine DTC warnings [54/77] ARM: dts: sun8i: a23/a33: Fix OPP DTC warnings [55/77] ARM: dts: sun8i: a23/a33: Remove unused address-cells/size-cells [56/77] ARM: dts: sun8i: a23/a33: Remove leading zeros from unit-addresses [57/77] ARM: dts: sun8i: a23/a33: Change framebuffer node names to avoid warnings [58/77] ARM: dts: sun8i: a23/a33: Remove redundant MMC pinmux tuning [59/77] ARM: dts: sun8i: a23/a33: Remove all useless pinctrl nodes [60/77] ARM: dts: sun8i: a23/a33: Change LRADC node names to avoid warnings [61/77] ARM: dts: sun8i: a23/a33: Reorder the pin groups [62/77] ARM: dts: sun8i: a23/a33: Remove card detect pull-up [63/77] ARM: dts: sun8i: a23/a33: Change pinctrl nodes to avoid warning [64/77] ARM: dts: sun8i: a23/a33: Remove underscores from nodes names [65/77] ARM: dts: sunxi: reference: Move the muxing back to the common DTSI [66/77] ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers [67/77] ARM: dts: sun8i: BPI-M2M: Remove i2c nodes [68/77] ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses [69/77] ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings [70/77] ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning [71/77] ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers [72/77] ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings [73/77] ARM: dts: sun8i: v3s: Fix Display Engine DTC warnings [74/77] ARM: dts: sun8i: a83t: Fix Display Engine DTC warnings [75/77] ARM: dts: sun8i: r40: Fix Display Engine DTC warnings [76/77] ARM: dts: sun9i: Fix Display Engine DTC warnings [77/77] ARM: dts: sun9i: Add missing unit address

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index ccd7b313448e..af4418de57be 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -128,7 +128,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; @@ -151,7 +151,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -169,13 +169,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -186,7 +186,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -203,7 +203,7 @@ }; }; -&mmc3_pins_a { +&mmc3_pins { /* AP6210 requires pull-up */ bias-pull-up; }; @@ -251,7 +251,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 339c48a477f5..af56ae95c63f 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -130,7 +130,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; @@ -153,7 +153,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -165,19 +165,19 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -296,27 +296,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index a4c0a38e1262..567bf6d493f9 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -108,7 +108,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; @@ -121,7 +121,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -137,19 +137,19 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -158,7 +158,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -194,27 +194,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_b>; + pinctrl-0 = <&uart4_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 849244e03f3a..9a027764cda4 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -114,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -136,7 +136,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -148,19 +148,19 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -232,7 +232,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 0adcd0aab0aa..20069542336f 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -147,7 +147,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -169,7 +169,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -181,25 +181,25 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -208,7 +208,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -224,7 +224,7 @@ }; }; -&mmc3_pins_a { +&mmc3_pins { /* AP6210 requires pull-up */ bias-pull-up; }; @@ -243,7 +243,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>; status = "okay"; }; @@ -302,13 +302,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 6ba689354f22..9ce59d49cf49 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -99,7 +99,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_vdd>; @@ -117,7 +117,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -132,31 +132,31 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &i2c3 { pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; + pinctrl-0 = <&i2c3_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -165,7 +165,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_mmc3_vdd>; bus-width = <4>; non-removable; @@ -182,7 +182,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -202,38 +202,38 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; &uart5 { pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; + pinctrl-0 = <&uart5_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index fe2b827cfa76..db708332616e 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -114,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <&reg_gmac_3v3>; @@ -127,7 +127,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -143,13 +143,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -158,7 +158,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vmmc3>; bus-width = <4>; non-removable; @@ -173,7 +173,7 @@ }; }; -&mmc3_pins_a { +&mmc3_pins { /* AP6210 / AP6330 requires pull-up */ bias-pull-up; }; @@ -196,7 +196,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 926fa194eb1b..0bf70b22bac4 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -74,7 +74,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -86,7 +86,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -98,13 +98,13 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */ @@ -156,7 +156,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 1b05ba466e7d..ad97f6f2cc2c 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -96,7 +96,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -115,13 +115,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -142,6 +142,6 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index cccfee6add35..32e204fe8c15 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -119,7 +119,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; status = "okay"; @@ -196,7 +196,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -208,19 +208,19 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -294,27 +294,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index cb8725d95e2b..1207e0d897b7 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -81,7 +81,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -93,7 +93,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -109,13 +109,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -124,7 +124,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; non-removable; @@ -149,7 +149,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index a4c5da733fbc..a8d15d01ac1a 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -107,7 +107,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -122,19 +122,19 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -167,13 +167,13 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts index 81ebc97b76ee..ea0d620119cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts @@ -22,7 +22,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 2aa719338dac..8f8a77121e80 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -110,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -132,7 +132,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -144,13 +144,13 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; @@ -210,7 +210,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -219,7 +219,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */ @@ -292,33 +292,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts index c56620a8fb20..093cd32c9a1c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -21,7 +21,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 3d7b5c848fef..631a80ae958e 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -78,7 +78,7 @@ &can0 { pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; + pinctrl-0 = <&can_ph_pins>; status = "okay"; }; @@ -104,7 +104,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy3>; phy-mode = "rgmii"; phy-supply = <&reg_vcc3v3>; @@ -131,7 +131,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -144,7 +144,7 @@ /* Exposed to UEXT1 */ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; eeprom: eeprom@50 { @@ -157,19 +157,19 @@ /* Exposed to UEXT2 */ &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; @@ -178,7 +178,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&rtl_pwrseq>; bus-width = <4>; @@ -274,22 +274,22 @@ /* Exposed to UEXT1 */ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; /* Exposed to UEXT2 */ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; @@ -303,14 +303,14 @@ /* Exposed to UEXT1 */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; /* Exposed to UEXT2 */ &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 46cd00ba8a74..7d6a90678025 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -105,7 +105,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -127,7 +127,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -143,7 +143,7 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; eeprom: eeprom@50 { @@ -155,7 +155,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -213,7 +213,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 727dffe1db05..0a2a26f9a5fb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -55,7 +55,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&reg_vcc3v3>; vqmmc-supply = <&reg_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index ed6f4e1e94b3..9ea84cf6437b 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -110,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -132,7 +132,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -144,7 +144,7 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; eeprom: eeprom@50 { @@ -160,7 +160,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -261,7 +261,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts index d99e7b193efe..58fd3519ab7d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts @@ -55,7 +55,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index f78f18fd7c1c..4cef69e90b2f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -117,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -139,7 +139,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -151,7 +151,7 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; eeprom: eeprom@50 { @@ -163,7 +163,7 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; @@ -223,7 +223,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -232,7 +232,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -325,33 +325,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index c138e39ac072..192d907fee71 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -119,7 +119,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; @@ -142,7 +142,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -156,13 +156,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -171,7 +171,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -231,7 +231,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 4f4821d6466d..c71d819cd0af 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -95,7 +95,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <&reg_gmac_3v3>; @@ -108,7 +108,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -122,13 +122,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -188,7 +188,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 5e538a23476c..1ba1dd6de244 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -113,7 +113,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -135,7 +135,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -147,13 +147,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -220,7 +220,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 0c0997effdf7..77a49e8b3d20 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -121,7 +121,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -133,7 +133,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -147,13 +147,13 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -220,7 +220,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 8fd85c6597bf..23b7d127e14f 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -90,7 +90,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -104,13 +104,13 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; gt911: touchscreen@5d { @@ -145,7 +145,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -174,7 +174,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -217,7 +217,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index bf4f51160737..1df18959d2a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -80,7 +80,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -92,7 +92,7 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; axp209: pmic@34 { @@ -104,13 +104,13 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -127,7 +127,7 @@ &mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&reg_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -202,7 +202,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index c5a6b7a65c52..75669fc51de5 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -747,22 +747,22 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - can0_pins_a: can0@0 { + can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; - clk_out_a_pins_a: clk_out_a@0 { + clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; - clk_out_b_pins_a: clk_out_b@0 { + clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; - emac_pins_a: emac0@0 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -771,7 +771,7 @@ function = "emac"; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -780,7 +780,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA10", @@ -794,47 +794,47 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; - i2c3_pins_a: i2c3@0 { + i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - ir0_tx_pins_a: ir0@1 { + ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; - ir1_rx_pins_a: ir1@0 { + ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; - ir1_tx_pins_a: ir1@1 { + ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -842,7 +842,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -850,7 +850,7 @@ bias-pull-up; }; - mmc3_pins_a: mmc3@0 { + mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; function = "mmc3"; @@ -858,118 +858,118 @@ bias-pull-up; }; - ps20_pins_a: ps20@0 { + ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; - ps21_pins_a: ps21@0 { + ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; - pwm0_pins_a: pwm0@0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; - pwm1_pins_a: pwm1@0 { + pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; - spi0_pins_a: spi0@0 { + spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; - spi0_cs0_pins_a: spi0_cs0@0 { + spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; - spi0_cs1_pins_a: spi0_cs1@0 { + spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; - spi1_pins_a: spi1@0 { + spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; - spi1_cs0_pins_a: spi1_cs0@0 { + spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; - spi2_pins_a: spi2@0 { - pins = "PC20", "PC21", "PC22"; + spi2_pb_pins: spi2-pb-pins { + pins = "PB15", "PB16", "PB17"; function = "spi2"; }; - spi2_pins_b: spi2@1 { - pins = "PB15", "PB16", "PB17"; + spi2_cs0_pb_pin: spi2-cs0-pb-pin { + pins = "PB14"; function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - pins = "PC19"; + spi2_pc_pins: spi2-pc-pins { + pins = "PC20", "PC21", "PC22"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { - pins = "PB14"; + spi2_cs0_pc_pin: spi2-cs0-pc-pin { + pins = "PC19"; function = "spi2"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; - uart2_pins_a: uart2@0 { + uart2_pi_pins: uart2-pi-pins { pins = "PI16", "PI17", "PI18", "PI19"; function = "uart2"; }; - uart3_pins_a: uart3@0 { + uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7", "PG8", "PG9"; function = "uart3"; }; - uart3_pins_b: uart3@1 { + uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; - uart4_pins_a: uart4@0 { + uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; - uart4_pins_b: uart4@1 { + uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; - uart5_pins_a: uart5@0 { + uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; - uart6_pins_a: uart6@0 { + uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; - uart7_pins_a: uart7@0 { + uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; }; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi index ddf4e722ea93..0d002f83a259 100644 --- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -121,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; };

[43/77] ARM: dts: sun7i: Change pinctrl nodes to avoid warning

Commit Message

Comments

Patch