@@ -556,9 +556,9 @@ sdio0: mmc@20300000 {
reg = <0 0x20300000 0 0x1000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&aon_clk CLK_SDIO0_2X>,
<&apahb_gate CLK_SDIO0_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
assigned-clock-parents = <&rpll CLK_RPLL_390M>;
@@ -572,9 +572,9 @@ sdio3: mmc@20600000 {
reg = <0 0x20600000 0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&aon_clk CLK_EMMC_2X>,
<&apahb_gate CLK_EMMC_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&aon_clk CLK_EMMC_2X>;
assigned-clock-parents = <&rpll CLK_RPLL_390M>;
@@ -849,9 +849,9 @@ sdio0: mmc@1100000 {
compatible = "sprd,sdhci-r11";
reg = <0x1100000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&ap_clk CLK_SDIO0_2X>,
<&apapb_gate CLK_SDIO0_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
assigned-clock-parents = <&pll1 CLK_RPLL>;
status = "disabled";
@@ -861,9 +861,9 @@ sdio3: mmc@1400000 {
compatible = "sprd,sdhci-r11";
reg = <0x1400000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable";
clocks = <&ap_clk CLK_EMMC_2X>,
<&apapb_gate CLK_EMMC_EB>;
+ clock-names = "sdio", "enable";
assigned-clocks = <&ap_clk CLK_EMMC_2X>;
assigned-clock-parents = <&pll1 CLK_RPLL>;
status = "disabled";
@@ -75,9 +75,10 @@ uart0: serial@0 {
"sprd,sc9836-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART0_EB>,
- <&ap_clk CLK_UART0>, <&ext_26m>;
+ <&ap_clk CLK_UART0>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
@@ -86,9 +87,10 @@ uart1: serial@100000 {
"sprd,sc9836-uart";
reg = <0x100000 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART1_EB>,
- <&ap_clk CLK_UART1>, <&ext_26m>;
+ <&ap_clk CLK_UART1>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
@@ -97,9 +99,10 @@ uart2: serial@200000 {
"sprd,sc9836-uart";
reg = <0x200000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART2_EB>,
- <&ap_clk CLK_UART2>, <&ext_26m>;
+ <&ap_clk CLK_UART2>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
@@ -108,9 +111,10 @@ uart3: serial@300000 {
"sprd,sc9836-uart";
reg = <0x300000 0x100>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "enable", "uart", "source";
clocks = <&apapb_gate CLK_UART3_EB>,
- <&ap_clk CLK_UART3>, <&ext_26m>;
+ <&ap_clk CLK_UART3>,
+ <&ext_26m>;
+ clock-names = "enable", "uart", "source";
status = "disabled";
};
};
@@ -129,8 +133,8 @@ ap_dma: dma-controller@20100000 {
/* For backwards compatibility: */
#dma-channels = <32>;
dma-channels = <32>;
- clock-names = "enable";
clocks = <&apahb_gate CLK_DMA_EB>;
+ clock-names = "enable";
};
sdio3: mmc@50430000 {
@@ -138,10 +142,10 @@ sdio3: mmc@50430000 {
reg = <0 0x50430000 0 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sdio", "enable", "2x_enable";
clocks = <&aon_prediv CLK_EMMC_2X>,
- <&apahb_gate CLK_EMMC_EB>,
- <&aon_gate CLK_EMMC_2X_EN>;
+ <&apahb_gate CLK_EMMC_EB>,
+ <&aon_gate CLK_EMMC_2X_EN>;
+ clock-names = "sdio", "enable", "2x_enable";
assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
assigned-clock-parents = <&clk_l0_409m6>;
@@ -194,8 +198,8 @@ hwlock: hwspinlock@40500000 {
compatible = "sprd,hwspinlock-r3p0";
reg = <0 0x40500000 0 0x1000>;
#hwlock-cells = <1>;
- clock-names = "enable";
clocks = <&aon_gate CLK_SPLK_EB>;
+ clock-names = "enable";
};
eic_debounce: gpio@40210000 {
@@ -258,9 +262,9 @@ watchdog@40310000 {
reg = <0 0x40310000 0 0x1000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
timeout-sec = <12>;
- clock-names = "enable", "rtc_enable";
clocks = <&aon_gate CLK_APCPU_WDG_EB>,
- <&aon_gate CLK_AP_WDG_RTC_EB>;
+ <&aon_gate CLK_AP_WDG_RTC_EB>;
+ clock-names = "enable", "rtc_enable";
};
};
@@ -277,9 +281,9 @@ agcp_dma: dma-controller@41580000 {
/* For backwards compatibility: */
#dma-channels = <32>;
dma-channels = <32>;
- clock-names = "enable", "ashb_eb";
clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
- <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+ <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+ clock-names = "enable", "ashb_eb";
};
};
};
DT convention is to have property-names after property. While at it, cleanup indentation for some clocks. No functional change. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- arch/arm64/boot/dts/sprd/sc9863a.dtsi | 4 +-- arch/arm64/boot/dts/sprd/ums512.dtsi | 4 +-- arch/arm64/boot/dts/sprd/whale2.dtsi | 38 +++++++++++++++------------ 3 files changed, 25 insertions(+), 21 deletions(-)